Arbor Technology Gladius G0830 Manuale utente
G0830
AMI
BIOS
Flash
SOP
(with USB HUB)
Date
2019/01/31
Release by
Andy Yao
Version
1.0
Preparation：
1. Bootable USB Flash Disk (FAT32).
2. USB HUB with external power.
3. OTG Cable (USB to Micor USB).
4. USB Keyboard.
5. Flash tool.
6. BIOS files.
(1) How to create a bootable USB dongle：
1. Run rufus-3.4.exe on your PC and follow instruction to run process.
2. It will show status in READY once process is completed.
(2) How to flash BIOS：
1. Copy EFI folder into Bootable USB Flash Disk.
2. Copy BIOS Flash tool into Bootable USB Flash Disk.
3. Disable Secure Boot.
3.1 Power on G0830 and press Delete key get into BIOS menu.
3.2 Select Secure Boot menu from Security sheet.
3.3 Disable Secure Boot then press F10 to save configuration and exit.
4. Turn on G0830 and press F11 get into boot menu.
5. Select “EFI shell” to boot from USB Flash Disk.
6. Type command at shell as below.
5.1：Fs1:
5.2：XXX.nsh(Ex: 027.nsh)
5.3：The device will shutdown once flash process is completed.
5.4：Turn on G0830 by press power button.
Warning：
1. Please don’t remove USB dongle or G0830 from USB HUB because the system will not boot
anymore.
2. Please reflash BIOS again if process was failed.
Altri manuali per Gladius G0830
1
Altri manuali Arbor Technology Tavoletta
Arbor Technology
Arbor Technology HT10 Manuale utente
Arbor Technology
Arbor Technology Gladius G1050 Series Manuale utente
Arbor Technology
Arbor Technology Gladius 10 Manuale utente
Arbor Technology
Arbor Technology Gladius G0975 Manuale utente
Arbor Technology
Arbor Technology Gladius G0710S Manuale utente
Arbor Technology
Arbor Technology MIL-6800 Manuale utente
Arbor Technology
Arbor Technology Gladius 5 Manuale utente
Arbor Technology
Arbor Technology Gladius G1056 Manuale utente
Arbor Technology
Arbor Technology Gladius G1052C Manuale utente
Arbor Technology
Arbor Technology Gladius G0830 Manuale utente
