Arenti IN1T Manuale utente
COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
Smart Indoor Wi-Fi Camera
QUICK GUIDE
IN1(T/Q)
Compatible with Amazon Alexa & Google Assistant
Quick start guide
1. Packing list
2. Product description
3. Installation
4. Product configuration
5. Specification
6. Legal notice
1. Packing list
EN
2. Product description
Power adapter X1
Camera X1 Screw X3
Power cable X1
Quick
guide X1
1
23
4
5
6
1. LED indicator
2. SD card slot
3. Speaker
4. Reset button
5. Power port
6. Microphone
3. Installation
Notice
Flashing red light (slow)
Flashing red light (fast)
Fixed red light
Fixed blue light
Wait for network config
Connecting the network
Camera is malfunctional
Camera is working correctly
To reset the device, press and hold the reset button
for 5s.
The camera beeps when the operation is completed.
LED indicator of camera:
360°
0~120°
Before choosing your preferred location, check the
Wi-Fi strength and coverage to ensure the camera
is fully functional.
Wall Mounting
1. Use the bracket as a template to mark the screw
positions on the wall. Drill holes into the wall and
push expansion screws into the holes.
2. Install the bracket onto the wall by using the
mounting screws.
EN
Registration
Open the Arenti App. If you are a new user, tap create
new account and follow the prompts to complete
account setup.
Note: You must agree with the Privacy Agreement.
EN
4. Product configuration
Scan QR code to download and install the Arenti APP.
Also, you can search "Arenti" on App Store (IOS) or
Play Store (Android).
Pairing
Note: When pairing, please put the camera and mobile phone
close to the router. If camera is not in the red slow blinking after
30 seconds of powering on, press and hold the reset button for
5 seconds to reset, and then configure the network again.
Open APP home page, Click "+" or "Add" and select
icon according to actual camera.
Power on the device. For about 30 seconds, the
camera will emit start-up tone and LED indicator will
flash red slowly.
Select the Wi-Fi network and input the password, and
then click "Next". Make sure that your phone has
connected to a fluent and steady Wi-Fi already.
EN
Notice
If no device is found and the pairing process is not
successful, please check below instructions:
1. Wi-Fi network is 2.4GHz.
2. Wi-Fi password entered is correct and the same
Wi-Fi network is used on the mobile device.
3. Camera is in pairing mode.
4. Check your WiFi for network activity.
Scan the QR code in your phone with the camera and
click "Next", when the camera comes out "dong dong
dong" and LED indicator becomes solid blue.
Scan the
QR code
of App
EN
If you have multiple cameras, please follow steps
again to add devices one by one.
To change Wi-Fi network, please restore the camera
to factory settings and follow steps to add the
camera.
Support
6. Legal notice
www.arenti.com
Symbols Direct current (DC)
Don't throw batteries or out of order products
with the household waste (garbage). The
dangerous substances that they are likely to
include may harm health or the environment.
Make your retailer take back these products
or use the selective collect of garbage
proposed by your city.
Hereby, Arenti, declares that the radio
equipment type 'IN1(T/Q)' is in compliance
with the Directive 2014/53/EU
The full test of the EU declaration of
conformity is available at the following
Internet address: www.arenti.com
For indoor use only
5. Specification
Product name
Resolution
Angle of view
IR Distance
Working temp
Local storage
Power
Consumption
Supported phone OS
Wireless connection
IN1
1920 x 1080
100°
Up to 10m
-20°C to 50°C
Micro SD card (up to 128GB)
DC 5V, 1A
Up to 2.5W
iOS 9 / Android 5.0 and above version
IEEE802.11 b/g/n 2.4GHz
IN1T
2304 x 1296
EN
IN1Q
2560 x 1440
Guía de inicio rápido
1. Lista de embalaje
2. Descripción del producto
3. Instalación
4. Configuración del producto
5. Especificación
6. Aviso legal
1. Lista de embalaje
ES
2. Descripción del producto
COMPATIBLE WITH AMAZON ALEXA & GOOGLE ASSISTANT
Adaptador de corriente
X1
Cámara X1
Tornillo X3
Cable eléctrico X1
Guía rápida X1
1
23
4
5
6
1. Indicador LED
2. Ranura para tarjetas SD
3. Altavoz
4. Botón de reinicio
5. Puerto de alimentación
6. Micrófono
3. Instalación
Aviso
Luz roja intermitente (lenta)
Luz roja intermitente (rápida)
Luz roja fija
Luz azul fija
Esperar a la configuración de la red
Conectando la red
La cámara funciona mal
La cámara funciona correctamente
Para reiniciar el dispositivo, mantenga pulsado el
botón de reinicio durante 5s.
La cámara emite un pitido cuando finaliza la
operación.
360°
0~120°
Antes de elegir tu ubicación preferida, comprueba
la potencia y la cobertura Wi-Fi para asegurarte de
que la cámara funciona perfectamente.
Montaje en pared
1. Utilice el soporte como plantilla para marcar las
posiciones de los tornillos en la pared. Taladra
agujeros en la pared e introduce los tornillos de
expansión en los agujeros.
2. Instale el soporte en la pared utilizando los
tornillos de montaje.
ES
support@arenti.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Arenti Webcam
