3. Quick start
1. Connect the Power cord into an electric outlet and into the back of the Amplifier.
2. Connect your speakers to the Amplifier using normal speaker cable.
3. Connect your source player (tablet, laptop, mobile phone, CD player, TV) to an input
on the amplifier, using the input connection that fits your source device best.
4. The SA1 has a pre out, enabling you to connect an active subwoofer or a power
amplifier.
4. Special functions and features
1. Remote control function with Samsung, Sony and Denon remotes
◊Argon SA1 is born with IR commands from the most common Sony and
Samsung TV. That is, you can use your Sony or Samsung IR remote control
for completely basic commands such as: volume up, volume down and mute.
On the SA1.
◊If you have a remote control that does not send IR commands (eg, a Smart
remote), some newer TVs also support IR learn so you can force the television
to broadcast IR commands to your product, thus using your TV remote control
to control your SA1. Find it in the list under setup on your TV to use this feature.
Check the manual for your TV if in doubt.
2. Auto sense (APU Auto Power Up)
◊When in standby mode, SA1 will by default start up automatically once you start
playing music from your source. (notice, there is No Auto sense on
Phono/Turntable input)
◊Bluetooth will Auto connect to already paired devices.
◊You can turn the Auto sense OFF if you wish. Press and hold the Power button
on the remote for 5 sec.
The Power indicator will flash fast for 2 sec. and the SA1 ‘s APU is disabled.
When SA1 is powered on again it works normal again with APU function.
◊If you do not want auto sense on the inputs at any time, you should always
power the amplifier off manually with the remote (and hold the power button for
5 seconds when doing so)
3. Auto standby (APD Auto Power Down)
◊The SA1 will automatically go into standby after 15 minutes if no music is
playing.
◊Timeout for Bluetooth connection loss with Bluetooth device is also 15 minutes
4. Un-Pair Bluetooth devices
◊Press and hold BT button for 5 sec – light will flash and unpair
