Argus DC1620 Manuale utente

Contents

Introduction

Overview

..........................................................................................

Product Package Contents

...........................................................

System Requirements

...................................................................

Getting To Know Your Digital Camera

.........................................

Battery Installation

.............................................................................

Software Installation

..........................................................................

Taking Photos

.....................................................................................

Camera Function Control

..................................................................

Power off the Camera

...................................................................

Continuous Shooting Mode

..........................................................

Deleting Photos

............................................................................

Flash

.............................................................................................

Photo Storage

...............................................................................

Downloading Photos

.........................................................................

Using Your Digital Camera as a PC Camera

...................................

Live Browse

......................................................................................

Video Conference

.............................................................................

Appendix 1: Specifications

...............................................................

Appendix 2: Answers of Frequent Asked Questions

.....................

“PhotoImpression” User’s Manual

..................................................

- 1 -

Introduction

Overview

Thank you for purchasing the DC1620 digital camera. It can take photos and

it also has the built-in PC camera functions. This camera is equipped with a

4MB SDRAM: if you want the photos in the camera to be downloaded into the

computer, you are only required to connect the USB cable; and if you want to

use the built-in PC camera functions, you can have a videoconference over the

internet to have a face-to-face online chat with friends.

Product Package Contents

•Digital Camera •CD - ROM ( User manual and software)

•USB cable •Quick user guide

System Requirements

ÿMicrosoft Windows 98 Se/2000/ME/XP operating system

ÿ125MB or above free hard disk space, 32MB or more RAM

ÿColor Monitor (Suggest at least 800*600 24 bits or above)

ÿAvailable USB port and CD-ROM

Getting to Know Your Digital Camera:

A. USB Socket

B. Tripod socket

C. Strap Holder

D. Lens

E. Flash

F. Shutter Button

G. Flash Slide Switch

H. Delete Button

I. Function Button

J. Viewfinder

K. LCD

L. Battery door

- 2 -

Battery Installation

1. Open the battery door.

2. Please place two AA alkaline batteries according to the pole directions for

batteries indicated on the battery door.

3. Close the battery door.

Note:

When you use the USB cable to connect the camera with a computer, it is

unnecessary to use the batteries because the camera use the power

provided by the computer.

Warning:

1. Don’t open the battery door at will, otherwise, the power cut will cause

the photos missing in the camera.

2. If you don’t use the camera for a long time, please take out of the

batteries for fear of the discharging or corrosion of the batteries.

3. Please don’t put the batteries into fire for fear of explosion and hazard

to environment.

4. Please download photos to your computer as soon as possible in order

to avoid photos lost.

Automatically enter the energy saving status

If the camera is not used in 60 seconds, the camera will automatically

enter the energy saving status.

Low Battery Alarm

When the batteries are becoming depleted, LCD will blink, then you

should download all photos into your computer immediately. Otherwise, all

photos will be lost from memory.

- 3 -

Software Installation

1. Install the installation CD into the CD-ROM driver

2. You will be prompted to select an installation language. You will select

“English”.

3. On “Welcome” screen please click the button for “next”.

4. Please read and accept the end user license.

- 4 -

5. Select installation destination and click the button for “next”.

6. When asked to select the components to install, verify that:

“PhotoImpression 4” .

7. Please select program folder. Then click “next” to continue.

- 5 -

8. This will start the installation. Please do not click anything until it has

finished.

9. Click “Finish” to finish ArcSoft software installation.

- 6 -

10. This will automatically install the driver of “Argus Digital Camera”.

11. Please read and accept the end user license.

12. Select installation destination and click the button for “next”.

- 7 -

13. This will start the installation. Please do not click anything until it has

finished.

14. Click “Finish” to finish ArcSoft software installation.

15. Congratulations! You have successfully installed “ArcSoft” software and

“Argus Digital Camera” driver. You are now ready to start taking and editing

photos.

Taking Photos

1. Press shutter button for about 4 seconds to open the camera and “Hi

- 8 -

000” will show on LCD at the back of camera. The camera will give out

one “beep” sound indicating the camera having entered working state.

2. Select required mode to take photos.

Hi means no compression (VGA) (about 32 photos, as the case may be)

Lo means compression (QVGA) (about 117 photos, as the case may be)

3. Hold the camera steadily, and press the shutter button to take photos.

4. You will hear one beep , indicating your photo has been taken, you may

continue taking photos.

5. When the camera is fully loaded with photos, if you press the shutter

button again, the buzzer will give out continuous beeps for alarming.

Prompt:

1. When taking photos, the higher” beep “ indicates the success of shooting

while the lower one indicates the failure of shooting.

2. Please hold camera steadily when you are taking photos.

3. When taking photos in poor light, the camera will give out two continuous

“beeps” , prompting the failure of shooting.

Camera Function Control

Power off the camera

The camera will enter stand-by status automatically about 60 seconds later

in case of no operation.

Continuous Shoot Mode

1. Upon starting of camera, press Hi / Lo function button for 3 seconds, the

continuous shoot icon “ ” will appear on the LCD display. Press the

shutter button within 5 seconds to taking photos. The camera will take

photos according to required mode specified at that time until you want

- 9 -

to stop shooting. Then the photos can be downloaded one by one.

2. The camera will regain previous status after shooting and releasing of

shutter button.

Note: Under the continuous shooting mode, the shooting may fail due to

poor lighting.

Deleting All Photos

1. Upon starting of camera, press delete function button for two times and

select the “ ” icon shown on the LCD display.

2. Pressing the shutter button again within 5 seconds will delete all the

photos stored in the memory. Then this function will be eliminated.

Deleting Single Photo

1. Upon starting of camera, press delete function button for one time and

select the “ ” icon shown on the LCD display.

2. Press the shutter button within 5 seconds once to delete the last photo

taken.This function will be eliminated later.

Flash

Upon starting of camera, move Flash Slide Switch to the end with flash sign

and the flash will being charging. About 6 seconds later, LED will be on, which

means fully charging. Press shutter button, Photo will be taken with flash Then

LED will be out. About 6 seconds later, LED will be on (the charging time will

be different with battery capacity) again for shooting. (Under flash mode, press

the shutter button only after full charging in order to avoid chip failure.)

The camera cannot take photo if the ambient light is totally insufficient

Note: To make sure the quality of photo, it’s highly recommended to use the

flash indoors and at night. The best effective flash distance is within1.5M.

Indice

Altri manuali Argus Macchina fotografica digitale

Argus

Argus Argoflex E Manuale utente

Argus

Argus DC1540 Manuale utente

Argus

Argus DC1500 Manuale utente

Argus

Argus Argus DC-5190 Manuale utente

Argus

Argus K Manuale elenco delle parti

Argus

Argus Argus DC-2185 Manuale utente

Argus

Argus SHOWMASTER 822 Manuale utente

Argus

Argus QC-3185 Manuale utente

Argus

Argus Bean3 Manuale utente

Argus

Argus Argus DC-1088 Manuale utente

Argus

Argus DC-5340 Manuale utente

Argus

Argus Quick Click QC-5340 Scheda tecnica

Argus

Argus Argus DC-1088 Manuale utente

Argus

Argus DC-6340 Manuale utente

Argus

Argus DC-3190 Manuale utente

Argus

Argus QuickClix 3640 Manuale utente

Argus

Argus DC3500 Istruzioni per il montaggio

Argus

Argus POWER ZOOM M4 Manuale utente

Argus

Argus C-33 Manuale utente

Argus

Argus DCM-098 Manuale utente

Argus

Argus QC-5340 Manuale utente

Argus

Argus QuickClix QC-3185 Manuale utente

Argus

Argus DC1730 Manuale utente

Argus

Argus Bean Bean - Carabiner Manuale utente

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente