Aries 2162000 Manuale utente
PAGE 1 • 2162000-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Level of Difficulty
Easy
Scan
for helpful
install tips
INSTALLATION MANUAL 2162000
Tools Required
Ratchet Extension
Socket, 13mm Socket, 16mm
Wrench, 13mm Wrench, 17m m
Level
Parts List
1 Bull bar
2Driver / left
mounting bracket
2Passenger / left
mounting bracket
6Hex bolt, 8mm
6Flat washer, 8mm
6 Nylock nut, 8mm
4Hex bolt, 10mm
8Flat washer, 10mm
4 Nylock nut, 10mm
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For black finishes, mild soap may be used to clean the product.
ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 2162000-INS-RA • PAGE 2
Step 1
Starting on the driver side, remove the
two factory hex bolts securing the tow
hooks to the vehicle frame.
Step 2
Attach the driver-side mounting bracket
using the factory bolts previously
removed from the tow hooks.
If you prefer to retain the factory tow
hooks, they may be reinstalled over the
bull bar bracket prior to reinstalling the
factory bolts.
Snug the hardware,
but do not fully tighten.
Step 3
Repeat steps 1 and 2 to attach
the passenger-side mounting bracket.
Step 4
To attach the bull bar mounting brackets,
lay the bull bar on a flat surface.
Insert two 8mm hex bolts in the outside
rail slots and one bolt in the inside slot.
Place the driver-side bracket over the
bolts and secure the bracket to the bull
bar using an 8mm flat washer and 8mm
nylon lock nut.
Snug the hardware,
but do not fully tighten.
PAGE 3 • 2162000-INS-RA • 800.798.0813 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Step 5
With help, lift the bull bar into place
and align the mounting tabs on the
outside of the mounting brackets.
Step 6
Insert a 10mm hex bolt with flat washer
on the outside of the bracket and a
10mm flat washer and nylon lock nut
on the inside.
Snug the hardware,
but do not fully tighten.
Repeat this process
for all mounting locations.
Step 7
Level and adjust the bull bar into the
desired position and tighten all hardware.
Step 8
Congratulations on the installation of
your new ARIES AdvantEDGE™bull bar.
With the bull bar installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this instruction manual.
Indice
Altri manuali Aries Accessori per automobili
Aries
Aries 2070450 Manuale utente
Aries
Aries 2074111 Manuale utente
Aries
Aries S224045 Manuale utente
Aries
Aries 2055117 Manuale utente
Aries
Aries 2074140 Manuale utente
Aries
Aries 2157002 Manuale utente
Aries
Aries 4520 Manuale utente
Aries
Aries S223044 Manuale utente
Aries
Aries 35700 Manuale utente
Aries
Aries 2153002 Manuale utente
Aries
Aries 2055100 Manuale utente
Aries
Aries 209045 Manuale utente
Aries
Aries AL235041 Manuale utente
Aries
Aries 2074120 Manuale utente
Aries
Aries S224054-2 Manuale utente
Aries
Aries 2156050 Manuale utente
Aries
Aries 205044 Manuale utente
Aries
Aries 1500201 Manuale utente
Aries
Aries S223005 Manuale utente
Aries
Aries 2051182 Manuale utente
