Arista Q6EWL Manuale utente

Quick Start Guide

Edge Threat Management

Appliance

CCA-ETM-Q6EWL

Arista Networks

www.arista.com

DOC-06005-01

Headquarters

5453 Great America Parkway,

Santa Clara, CA 95054

USA

+1-408 547-5500

Support

+1-408 547-5502

+1-866 476-0000

Sales

+1-408 547-5501

+1-866 497-0000

https://www.arista.com/en/ mailto:[email protected] mailto:[email protected]

without notice. The trademarks, logos and service marks ("Marks") displayed in this documentation are the property

of Arista Networks in the United States and other countries. Use of the Marks are subject to Arista Network Term

of Use Policy, available at http://www.arista.com/en/terms-of-use. Use of marks belonging to other parties is for

informational purposes only.

Contents

Chapter 1: Overview................................................................................1

1.1 Scope......................................................................................................................................1

1.2 Receiving and Inspecting the Equipment...............................................................................1

1.3 Installation Process.................................................................................................................2

1.4 Safety Information...................................................................................................................3

1.5 Obtaining Technical Assistance............................................................................................. 3

1.6 Specifications..........................................................................................................................4

Chapter 2: Preparation............................................................................5

2.1 Site Selection..........................................................................................................................5

2.2 Tools and Parts Required for Installation...............................................................................6

2.3 Electrostatic Discharge Precautions.......................................................................................6

Chapter 3: Mounting the Appliance.......................................................7

3.1 Desktop Installation................................................................................................................ 7

3.2 Rack Mounting the Appliance................................................................................................ 8

3.2.1 Mounting the Power Supply....................................................................................10

3.2.2 Attaching Mounting Brackets to the Chassis..........................................................11

3.2.3 Inserting the Appliance into the Rack.....................................................................12

3.3 Mounting the Appliance on a Wall.......................................................................................12

Chapter 4: Cabling the Appliance....................................................... 13

Chapter 5: Configuring the Appliance................................................ 15

Appendix A: Status Indicators.............................................................17

A.1 Front Indicators.................................................................................................................... 17

Appendix B: Parts List..........................................................................19

Appendix C: Front Panel...................................................................... 21

Appendix D: Rear Panel....................................................................... 23

Appendix E: Regulatory Model Numbers........................................... 25

Appendix F: Taiwan RoHS Information...............................................27

iii

Chapter 1

Overview

This guide is intended for properly trained service personnel and technicians who need to install

selected Arista Appliances.

The following topics are covered in this section:

•Scope

•Receiving and Inspecting the Equipment

•Installation Process

•Safety Information

•Obtaining Technical Assistance

•Specifications

1.1 Scope

This guide is intended for properly trained service personnel and technicians who need to install the

following Arista Appliance:

CCA-ETM-Q6EWL

Important:

Only qualified personnel should install, service, or replace this equipment.

Seul le personnel qualifié doit installer, service, ou remplacer cet équipement.

1.2 Receiving and Inspecting the Equipment

Upon receiving the appliance, inspect the shipping boxes and record any external damage. Retain

packing materials if you suspect that part of the shipment is damaged; the carrier may need to inspect

them.

If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any

accessories that may be packaged in the same box as the main unit.

Inspect the packing list and confirm that you received all listed items. Compare the packing list with

your purchase order. Parts List provides a list of components included with the appliance.

1.3 Installation Process

The following tasks are required to install and use the appliance:

1. Select and prepare the installation site (Site Selection).

2. Assemble the installation tools listed (Tools and Parts Required for Installation).

3. Install the appliance (Mounting the Appliance).

4. Connect the appliance to the power source and network appliances (Cabling the Appliance).

5. Configure the appliance (Configuring the Appliance).

Important:

Class 1 Laser Product: This product has provisions to install Class 1 laser transceivers

which provide optical coupling to the communication network. Once a Class 1 laser product

is installed, the equipment is a Class 1 Laser Product. The customer is responsible for

selecting and installing the Class 1 laser transceiver and for insuring that the Class 1

AEL (Allowable Emission Limit) per EN/IEC 60825, CSA E60825-1, and Code of Federal

Regulations 21 CFR 1040 is not exceeded after the laser transceiver have been installed.

Do not install laser products whose class rating is greater than 1. Refer to all safety

instructions that accompanied the transceiver prior to installation. Only Class 1 laser

Appliances, certified for use in the country of installation by the cognizant agency are to be

utilized in this product.

Produit Laser de classe 1: Ce produit a des dispositions pour installer des émetteurs-

récepteurs de laser de classe 1 qui offre de couplage au réseau de communication

optique.Une fois un produit laser de classe 1 est installé, l'équipement est un produit Laser

de classe 1 (Appareil à Laser de Classe 1).Le client est responsable pour sélectionner et

installer l'émetteur/récepteur de laser de classe 1 et pour assurer que la classe 1 AEL (limite

d'émission admissible) par EN/IEC 6-825, CSA E60825-1, et Code des règlements fédéraux

21 CFR 1040 ne soit pas dépassée après avoir installé l'émetteur/récepteur de laser. Ne

pas installer des appareils à laser dont la cote de classe est supérieure à 1.Voir toutes

les consignes de sécurité qui ont accompagné l'émetteur-récepteur avant l'installation.

Seuls appareils laser de classe 1 certifiés pour une utilisation dans le pays d’installation par

l’organisme compétent doivent être utilisées dans ce produit.

Important:

Ultimate disposal of this product should be handled in accordance with all national laws and

regulations.

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien

qualifié.

Overview

1.4 Safety Information

Refer to the Arista Networks document Safety Information and Translated Safety Warnings available

at: https://www.arista.com/en/support/product-documentation.

1.5 Obtaining Technical Assistance

Any customer, partner, reseller, or distributor holding a valid Arista Service Contract can obtain

technical support in any of the following ways:

•Email: http://[email protected]. This is the easiest way to create a new service request.

•Web: https://www.arista.com/en/support.

A support case may be created through the support portal on our website. You may also download

the most current software and documentation, as well as view FAQs, Knowledge Base articles,

Security Advisories, and Field Notices.

•Phone: +1 866-476-0000 or +1 408-547-5502.

Important:

No user serviceable parts inside. Refer all servicing to qualified service personnel.

Aucune pièce réparable par l'utilisateur à l'intérieur. Confiez toute réparation à un technicien

qualifié.

1.6 Specifications

Table 1: Appliance Specifications (Dimensions and Weights)

Appliance Size (W x D x H) Weight

CCA-ETM-Q6EWL 232mm x 174mm x 42mm 1.4 kg

Table 2: Appliance Specifications (Operational and Storage)

Appliance Operating Temperature

and Relative Humidity Storage Temperature and

Relative Humidity Operating Altitude

CCA-ETM-

Q6EWL 0°C to 40°C

10 to 90% RH

-20°C to 70°C

5 to 95% RH

Sea level to 5000 meters.

Table 3: Appliance Specifications (Power Input)

Power Source Ratings

AC INPUT - 40W Power

Adapter 100~240V, 1.2A, 50-60Hz

Chapter 2

Preparation

The following topics are covered in this section:

•Site Selection

•Tools and Parts Required for Installation

•Electrostatic Discharge Precautions

2.1 Site Selection

The following criteria should be considered when selecting a site to install the appliance.

•Temperature and Ventilation: For proper ventilation, install the appliance where there is ample

airflow to the front and back of the appliance. The ambient temperature should not go below 0° or

exceed 40°C.

Important: To prevent the appliance from overheating, do not operate it in an area where

the ambient temperature exceeds 40°C (104°F).

Pour empêcher l’interrupteur de surchauffe, ne pas utiliser il dans une zone où la

température ambiante est supérieure à 40°C (104°F).

•Rack Space: Install the appliance in a 19" rack or cabinet. The appliance height is 1 RU. The rack

mounting kit provides mounting brackets for two-post racks.

When mounting the appliance in a partially filled rack, load the rack from bottom to top, with the

heaviest equipment at the bottom. Load the appliance at the bottom if it is the only item in the rack.

•Other Requirements: Select a site where liquids or objects cannot fall onto the equipment and

foreign objects are not drawn into the ventilation holes. Verify these guidelines are met:

• Clearance areas to the front and rear panels allow for unrestricted cabling.

• All front and rear panel indicators can be easily read.

• Power cords can reach from the power outlet to the connector on the rear panel.

Important: All power connections must be removed to de-energize the unit.

Toutes les connexions d’alimentation doivent être enlevées pour hors tension l’appareil.

2.2 Tools and Parts Required for Installation

The following tool(s) are required for installation:

• Philips #2 screwdriver

2.3 Electrostatic Discharge Precautions

Observe these guidelines to avoid ESD damage when installing or servicing the appliance

• Assemble or disassemble equipment only in a static-free work area.

• Use a conductive work surface (such as an anti-static mat) to dissipate static charge.

• Wear a conductive wrist strap to dissipate static charge accumulation.

• Minimize handling of assemblies and components.

• Keep replacement parts in their original static-free packaging.

• Remove all plastic, foam, vinyl, paper, and other static-generating materials from the work area.

• Use tools that do not create ESD.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Arista Controllori

Arista

Arista ALC2-R Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente