Arlo Pro 2 Manuale utente
1
Arlo Pro 2 Quick Start Guide
Welcome
Thank you for choosing Arlo Pro 2.
Getting started is easy.
3
What’s Included
Base station
Base station AC
power adapter
Magnetic wall
mounts
Arlo Pro 2 Wire-Free
Camera
Rechargeable battery
Ethernet cable
Mounting
screws
Camera AC power
adapter
Camera power
adapter cable
4
1Use Your Camera Wire-Free
¾To install the battery:
a. Unlock the battery compartment by
pressing and holding the latch.
b. Gently pull the battery door back to
open the compartment.
c. Align the battery contacts.
d. Insert the battery.
e. Close the battery door.
Note: The Arlo battery is fully charged when it
leaves the factory.
You can use your camera wire-free, powered by the battery, or while plugged into
an AC power outlet.
Before using your camera wire-free, you must insert the battery.
Note: You do not need to insert the battery if you are connecting your Arlo
camera to an AC power outlet.
5
Get the App
2
For the best experience, download the Arlo app for your smartphone by
scanning this QR code or searching for Arlo in the app store.
https://my.arlo.com/#/login
Note: If you already use the Arlo app, make sure that you are using the
latest version. To find out if an update is available, go to the app
store and search for Arlo.
6
3Connect Your Base Station to the
Internet
a. Connect the base station to your
router using an Ethernet cable.
b. Connect the base station AC
adapter to your base station and
plug it in.
7
c. Turn the base station on by
pressing the On/O button.
The Power LED and Internet LED on
the front of the base station light
green in about two minutes.
8
Get an Account
4
¾To create a new Arlo account:
a. Launch the Arlo app from your smartphone, tap the New
to Arlo? button, and select Arlo Wire-Free.
If you are using a computer, visit https://my.arlo.com/#/login.
b. Follow the onscreen instructions.
¾To add an Arlo Pro 2 camera to an existing Arlo account:
a. If you already set up an Arlo account, log in, and click or
tap Add Device.
b. Follow the onscreen instructions.
9
Sync Your Cameras With the Base
Station
5
a. Bring the camera within 1 to 3 feet (30 to 100 centimeters) of the
base station.
Note: Cameras must be synced one at a time.
10
b. Press the Sync button on the top of the base station for
about two seconds and then release the button.
c. Wait for the Sync Status LED to blink green.
d. Press the Sync button on top of the camera for about two
seconds and then release the button.
Altri manuali per Pro 2
8
Indice
Altri manuali Arlo Telecamera di sicurezza
Arlo
Arlo VMC2020 Manuale utente
Arlo
Arlo Pro HD 2 Manuale utente
Arlo
Arlo Essential XL Outdoor Cameras Manuale utente
Arlo
Arlo Pro HD Manuale utente
Arlo
Arlo Pro 4 Manuale utente
Arlo
Arlo Pro 3 Manuale utente
Arlo
Arlo FlexPower VNC4030-111PAS Manuale utente
Arlo
Arlo Go 2 Manuale utente
Arlo
Arlo Pro 2 Manuale utente
Arlo
Arlo Pro 3 Manuale
