ARM ARM710T Manuale utente

ARM DUI 0114A

ARM710T Header Card

(KPI-0032A)

User Guide

ARM DUI 0114A

ARM710T Header Card

User Guide

Release information

Proprietary notice

ARM, the ARM Powered logo, Thumb and StrongARM are registered trademarks of ARM Limited.

The ARM logo, AMBA, PrimeCell, Angel, ARMulator, EmbeddedICE, ModelGen, Multi-ICE,

ARM7TDMI, ARM7TDMI-S, ARM9TDMI, TDMI and STRONG are trademarks of ARM Limited.

Document confidentiality status

This document is Open Access. This document has no restriction on distribution.

Product status

The information in this document is Final (information on a developed product).

ARM web address

http://www.arm.com

Change history

Date Issue Change

27th April 1999 A Release

er pro

ucts or serv

ces ment

one

ere

n may

e tra

emar

s o

r respect

ve owners.

Neither the whole nor any part of the information contained in, or the product described in, this document may

be adapted or reproduced in any material form except with the prior written permission of the copyright

holder.

The product described in this document is subject to continuous developments and improvements. All

particulars of the product and its use contained in this document are given by ARM Limited in good faith.

However, all warranties implied or expressed, including but not limited to implied warranties or

merchantability, or fitness for purpose, are excluded.

This document is intended only to assist the reader in the use of the product. ARM Limited shall not be liable

for any loss or damage arising from the use of any information in this document, or any error or omission in

such information, or any incorrect use of the product.

ARM DUI 0114A

iii

Preface

This preface introduces the ARM710T Header Card and its reference documentation. It

contains the following sections:

•About this document on page iv

•Further reading on page vi

•Feedback on page vii.

ARM DUI 0114A

About this document

This document is the ARM710T Header Card User Guide.

Intended audience

This document has been written for experienced hardware and software engineers who

wish to use an ARM710T header card, with their ARM development board, for code

development and evaluation.

Organization

This document is organized into the following chapters:

Chapter 1 Overview of the ARM710T Header Card

Read this chapter for an introduction to the ARM710T Header Card.

Chapter 2 Setting up your System

Read this chapter for a description of how to set up the ARM

development board to work with the ARM710T Header Card.

Chapter 3 Configuring the ARM710T Header Card

Read this chapter for a description of how to configure the ARM710T

Header Card.

Chapter 4 Circuit Descriptions

Read this chapter for a description of the circuit board of the

ARM710T Header Card.

Typographical conventions

The following typographical conventions are used in this document:

bold HighlightsARMprocessorsignalnameswithintext,andinterface

elements such as menu names. May also be used for emphasis in

descriptive lists where appropriate.

italic Highlights special terminology, cross-references and citations.

typewriter Denotes text that may be entered at the keyboard, such as

commands, file names and program names, and source code.

ARM DUI 0114A

typewriter Denotes a permitted abbreviation for a command or option. The

underlined text may be entered instead of the full command or

option name.

typewriter italic

Denotesargumentsto commandsor functionswherethe argument

is to be replaced by a specific value.

typewriter bold Denotes language keywords when used outside example code.

ARM DUI 0114A

Further reading

This section lists publications by ARM Limited.

ARM publications

For additional information, refer to the following:

•ARM Target Development System User Guide (ARM DUI 0061).

•ARM Multi-ICE User Guide (ARM DUI 0048).

•ARM Multi-ICE Installation Guide (ARM DSI 0005).

•ARM Software Development Toolkit User Guide (ARM DUI 0040).

•ARM710T Datasheet (ARM DDI 0086).

ARM DUI 0114A

vii

Feedback

ARM Limited welcomes feedback both on the ARM710T header card, and on the

documentation.

Feedback on this document

If you have any comments on this document, please send email to [email protected]

giving:

• the document title

• the document number

• the page number(s) to which your comments refer

• a concise explanation of your comments.

General suggestions for additions and improvements are also welcome.

Feedback on the ARM710T header card

If you have any comments or suggestions about this product, please contact your

supplier giving:

• the product name

• a concise explanation of your comments.

viii

ARM DUI 0114A

Contents

ARM710T Header Card User Guide

Preface

About this document ......................................................................................................iv

Further reading...............................................................................................................vi

Feedback ......................................................................................................................vii

Chapter 1 Overview of the ARM710T Header Card

1.1 Introduction to the ARM710T header card....................................................1-2

1.2 Board layout..................................................................................................1-3

Chapter 2 Setting up your System

2.1 Setting up your ARM development board.....................................................2-2

2.2 Debugging using Angel.................................................................................2-4

2.3 Debugging using Multi-ICE...........................................................................2-5

2.4 Debugging using EmbeddedICE...................................................................2-6

Chapter 3 Configuring the ARM710T Header Card

3.1 Setting the core clock frequency...................................................................3-2

3.2 Surface mount links ......................................................................................3-4

3.3 Using the external clock input.......................................................................3-5

3.4 Setting the bus clocking mode......................................................................3-6

3.5 Setting the endianness .................................................................................3-7

ARM DUI 0114A

Chapter 4 Circuit Descriptions

4.1 The header card circuit board....................................................................... 4-2

4.2 Connectors ................................................................................................... 4-4

Index

Indice

Altri manuali ARM Hardware per computer

ARM

ARM ARM946E-S Manuale del prodotto

ARM

ARM DSTREAM Istruzioni utente

ARM

ARM DSTREAM DS-5 Manuale utente

ARM

ARM DSTREAM Istruzioni utente

ARM

ARM Cortex-M3 DesignStart Manuale del prodotto

ARM

ARM DSTREAM-HT Manuale utente

ARM

ARM MPS2 Manuale del prodotto

ARM

ARM Cortex-M3 DesignStart Manuale del prodotto

ARM

ARM Cortex A9 Manuale del prodotto

ARM

ARM Cortex-A76 Core Manuale del prodotto

ARM

ARM OKI ML671000 Manuale utente

ARM

ARM DSTREAM-HT Manuale utente

ARM

ARM MPS3 Manuale utente

ARM

ARM ARM7TDMI Manuale operativo e di manutenzione

ARM

ARM ARM1176JZF-S Manuale del prodotto

ARM

ARM Versatile/IT1 Manuale utente

ARM

ARM DSTREAM-PT Manuale utente

ARM

ARM ETB11 Manuale del prodotto

ARM

ARM ARM9TDMI Manuale del prodotto

ARM

ARM ARM966E-S Manuale per l'uso e la cura

ARM

ARM DSTREAM-ST Manuale utente

ARM

ARM PrimeCelL PL320 Manuale del prodotto

ARM

ARM Cordio BT4 Radio IP Manuale utente

ARM

ARM ARM926EJ-S Manuale del prodotto

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente