Armorgard cuttingstation SS7-T Guida rapida
cuttingstationTM
Operational and maintenance manual
Suitable for: SS7-T
1-877-794-2848 [email protected]
2
Welcome
Welcome to the Armorgard CuttingStation. A mobile
unit that was designed to help contain noise, dust
and increase safety while cutting. Please consult this
manual for instructions on how to get the most from
the unit.
Please read this operational and maintenance
manual carefully prior to using your CuttingStation.
Always keep this manual with the product and read
prior to use.
3
Contents
Safety information 4
Product specification 5
What’s included 6
Tools you’ll need 8
Getting to know your CuttingStation 9
Padlock housing dimensions 10
Electrical safety information 11
How to use the lock 12
How to assemble 14
Installing the casters 15
Installing the support arms 16
Attaching the power strip 18
Attaching the light 19
How to use the dust collector 20
How to use the support arms 21
How to extend the cutting space 22
Optional extras 23
Installing the crane lifting eye kit (optional extra) 24
Storing the unit 25
Transporting the unit 26
Equipment care & ongoing maintenance 27
Warranty 26
Spare parts 30
Notes 31
4
Safety information
Before using the CuttingStation, ensure any relevant risk assessments are carried out.
Armorgard cannot be responsible for accidents that occur due to negligence. Cordon off
a clear area when operating the CuttingStation determined by a site risk assessment.
Before using the CuttingStation, check against relevant OSHA guidelines.
Always ensure the CuttingStation is not damaged before using it.
Always lock the unit when not in use or unattended. Do not leave keys inside the unit
while locking.
Before using the CuttingStation, you must lock the casters. Only position the
CuttingStation on stable and even ground to prevent it rolling over and causing injury or
personal harm. Ensure caster is locked when it’s not being moved.
You must close the doors while the unit is in motion to prevent damage to contents
and the product, and ensure support arms are secured in place. When transporting, the
doors must be locked shut and the product securely fastened to the vehicle.
Any alteration to or unintended use of this product could create a danger of an explosion
or other hazardous conditions that can result in serious personal injury, property damage
or even death.
Always wear the appropriate PPE for the task you are performing, as outlined in your risk
assessment or safe work practices.
Before servicing or making any adjustments, always disconnect power and secure any
equipment safely.
RelevantreextinguishersmustbenearbywhiletheCuttingStationisinuse.Fourhooks
are provided on the CuttingStation to mount the extinguisher.
Take care when moving the rear panel, material support arms and door latches as they
canpresentangertraphazard.
Only use in well lit areas.
Ensure weight is evenly distributed and heavier items are ALWAYS loaded in the base.
5
Product specification
Product
code
Description Weight (lbs) External dimensions
W x D x H (inches)
Internal dimensions
W x D x H (inches)
SS7-T CuttingStation 396 54.7 x 30.7 x 75 44.3 x 28.3 x 22
Do Don’t
Carry out risk assessments Misuse the CuttingStation
Keepreextinguishers nearby Leave keys inside unit when locking
Operateonaat,evensurface Leave trailing cables from unit
Apply brakes while cutting Leave unlocked when unattended
While every effort has been made to ensure this operational and maintenance manual
covers every aspect needed to operate your product safely, please take care while using
the product and always operate with caution. Always liaise with management personnel
on site for any additional operational restrictions that you need to be aware of.
The unit has an overall WLL of 1000 lbs.
Do not exceed roller capacity of 100 lbs.
This product should not be used for transporting or storing explosives, hazardous
wastes,ammablesorhazardousmaterialssuchasgastanks,containersofsolvents,
dynamite, gunpowder, etc.
Only use UL or CSA listed electrical devices that meet the requirements of the local
jurisdiction.
You may require a forklift or pallet truck when unloading your CuttingStation.
CuttingStation™ Patent 17183824.6 Design Registration 004511525
6
What’s included...
1x CuttingStation 1x light1x caster kit
2 x support arm
housing
8x M6 bolts and
M6 nyloc nuts
(for support arm
housings)
2 x galvanised
support arms
2 x material support
T-piece
2 x material support
V-piece
2 x material rollers
7
4x handle wheel star
screws
1x rubber grommet
1x power strip 1x rubber mat
8
Tools you’ll need...
2x adjustable wrench or
ratchet and socket set
(to add casters and
support arm housing)
Drill and 13/32” or
10.5mm drill bit
(to add optional
crane lifting eyes)
Screwdriver
(for attaching
power strip)
9
T-Latch locking
mechanism
Multi-purpose
material support
arm - expands
out up to 30”
Dust collector with waste
extractor connection
Getting to know your
cuttingstationTM
Your new, instant cutting room, revolutionizing
safe cutting on jobsites
Forklift pockets Heavy-duty
casters
Suitable for
use on-site
Heavy duty
casters
Data plate
featuring unique
product serial
number
Fireextinguisher
mounting hook
(four positions)
Expanding
back panel
T-Latch Lock Cable pass
through point
10
Padlock housing dimensions
Padlock not included
This lock system is designed to be used with a Master Lock No. 1, Master Lock No. 5, ABUS
41/50 or American Lock No. 50, or an equivalent sized lock. If you are using a padlock not
listed above, it is your responsibility to make sure the lock mechanism is working correctly.
Padlocks must meet ALL requirements listed in diagram.
Indice
