Armstrong 64357 Istruzioni per il montaggio
!"#$%
&'(')*+,-*./0(')/*1)2*3))4255...631-0+-7-/'83)69+:
;:1'<*+,-*)/93='91<*(,44+-)*1)2*4-+>,9)(,44+-)?31-0+-7-/'83)69+:
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18l
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2018 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6 Item 64357
GH@;IJ KLGIHMMHIKNL OHPIG*MKGI
I10</*+7*Q+=)/=)(
Safety ......................................................... 2
Specifications ............................................. 3
Installation .................................................. 4
Parts List.................................................... 11
Warranty .................................................... 12
RHPLKLS*GJTUNMG*HLV*V;@KLKIKNLG
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Page 3@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6Item 64357
GH@;IJKLGIHMMHIKNLOHPIG*MKGI
KTONPIHLI*GH@;IJ*KL@NPTHIKNL
@1'<,-/*)+*3//>*)3/(/*.1-='=8(*:1W*-/(,<)*'=*4/-(+=1<*'=X,-W*1=>5+-*4-+4/-)W*>1:18/2
1. Do not exceed listed weight capacity. U/*1.1-/*+7*
>W=1:'9*<+1>'=8Y Sudden load movement may
briefly create excess load causing product failure.
2. Do not mount to hollow wall, gypsum board,
or similar material that will not support the
weight of the TV. Mount only to structurally-
sound 2″ x 4″ or larger wood stud or minimum
8 inch thick solid concrete walls that can safely
support combined weight of TV Mount, TV and
all attached hardware and components.
3. Verify that mounting surface has no hidden
utility lines before drilling or driving screws.
4. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
5. Inspect before installing; do not mount to wall
if parts are missing, loose or damaged.
6. Assemble and install only according to
these instructions. Improper assembly and
installation can create hazards and lead to
personal injury and property damage.
7. Keep installation area clean and well lit.
8. Do not assemble or install when tired or when
under the influence of drugs or medication.
9. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
10. Use as intended only. Use to mount
VESA compliant TV to vertical wall only. Do not
mount overhead or to non-vertical surface.
11. This product is not a toy.
Do not allow children to play with or near this item.
12. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
13. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
14. Q1-/7,<<W*-/1>*I&*'=()-,9)'+=(*0/7+-/*
'=()1<<1)'+=6**Z1-0+-*@-/'83)*I++<(*'(*=+)*
-/(4+=('0</*7+-*>1:18/*91,(/>*0W*71'<,-/*)+*
7+<<+.*I&*:+,=)'=8*'=()-,9)'+=(B*':4-+4/-*
'=()1<<1)'+=B*+-*':4-+4/-5<++(/*31->.1-/6
*GH&;*IZ;G;*KLGIP[QIKNLG6
G4/9'7'91)'+=(
Weight Capacity 130 lb
TV Size Range about 37″ to 80″ diagonal
VESA Compliance (in mm)
100 x 100
200 x 100
200 x 200
300 x 300
400 x 200
400 x 400
600 x 400
Page 4 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6 Item 64357
GH@;IJ KLGIHMMHIKNL OHPIG*MKGI
K=()1<<1)'+=*K=()-,9)'+=(
*P/1>*)3/*;LIKP;*KTONPIHLI*GH@;IJ*KL@NPTHIKNL*(/9)'+=*1)*)3/*0/8'=='=8*+7*)3'(*
:1=,1<*'=9<,>'=8*1<<*)/\)*,=>/-*(,03/1>'=8(*)3/-/'=*0/7+-/*(/)*,4*+-*,(/*+7*)3'(*4-+>,9)6
T+,=)*R1<<*T+,=)
R++>*G),>(
QH[IKNLY Do not mount to steel wall studs.
1. Verify wood studs are at least 16″ apart.
Use a stud finder (sold separately) to find two
adjacent studs 16″ apart. Mark locations of studs.
RHPLKLSY Verify that mounting surface has no
hidden utility lines before drilling or driving screws.
2. Set Wall Mount (1) against wall at desired height.
Place a level (sold separately) on top of Wall Mount,
adjust until level. Mark locations of mounting holes.
3. Drill four 3/16″ holes 3-1/2″ deep into
studs at marked locations.
RHPLKLSY N=<W*:+,=)*R1<<*T+,=)*)+*.++>*(),>(6*
Do not mount Wall Mount to drywall or plaster.
4. Use four Wall Lag Bolts (17) and
four Wall Washers (19) to mount
Wall Mount to wood studs.
R1<<*M18*
U+<)*]C%^
R1<<*R1(3/-*
]CF^
R1<<*
T+,=)*]C^
Page 5@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6Item 64357
GH@;IJKLGIHMMHIKNLOHPIG*MKGI
Q+=9-/)/*
QH[IKNLY Do not mount to brick or cinder block wall.
Minimum 8 inch thick solid concrete is required.
1. Set Wall Mount (1) against wall at desired height.
Place a level (sold separately) on top of Wall Mount,
adjust until level. Mark locations of mounting holes.
2. Using a 3/8″ carbide tip masonry bit, drill four
holes 3-1/2″ deep at marked locations.
3. Insert Concrete Wall Anchors (18) into holes,
making sure they are flush with wall surface.
Q+=9-/)/
Q+=9-/)/*R1<<*
H=93+-*]CE^
#DC5_″
RHPLKLSY**Concrete*Wall Anchors
must be set firmly into concrete.
4. Use four Wall Lag Bolts (17) and
Wall Washers (19) to mount Wall Mount to wall.
R1<<*M18*
U+<)*]C%^
R1<<*R1(3/-*
]CF^
R1<<*
T+,=)*]C^
Page 6 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6 Item 64357
GH@;IJ KLGIHMMHIKNL OHPIG*MKGI
T+,=)*I&*O<1)/*)+*I&*
RHPLKLSY I+*-/>,9/*-'(`*+7*/</9)-'9*(3+9`B*,=4<,8*I&*0/7+-/*)3-/1>'=8*0+<)(*'=)+*I&a(*019`*41=/<6**
LNIKQ;2 Consult TV owner’s manual before attaching this Mount. Harbor Freight Tools is not responsible for
damage caused by failure to follow TV mounting instructions, improper installation, or improper/loose hardware.
1. Cover TV screen with a towel or other soft material
and tilt it against the wall or another solid surface.
V+*=+)*<1W*I&*719/*>+.=6
2. Consult TV Owner’s Manual to determine TV’s
VESA mounting pattern and hardware requirements.
3. Mounting Hardware:
a. Use mounting hardware that came with the TV, or
b. If the TV did not come with mounting hardware,
select from included TV Bolts, TV Washers and
TV Spacers (see Parts List on page 11).
RHPLKLSY**I+*4-/b/=)*(/-'+,(*'=X,-WB*>+*=+)*,(/*
31->.1-/*)31)*>+/(*=+)*:1)93*)3/*I&a(*31->.1-/B*
)31)*'(*)++*<+=8*+-*)++*(3+-)B*+-*+b/-)'83)/=*
)3/*31->.1-/6**V+'=8*(+*:1W*>1:18/*)3/*
I&B*9-/1)/*1*(3+9`*31c1->*0W*/</9)-'7W'=8*)3/*
31->.1-/5:+,=)B*1=>5+-*91,(/*)3/*I&*)+*71<<6
4. Select Mounting Instructions below
according to TV’s mounting pattern.
T+,=)'=8*K=()-,9)'+=(*7+-*&;GH*Cdd*\*CddB*_dd*\*CddB*_dd*\*_dd
Attach TV Plate (2) to Mounting Holes on TV using appropriate TV Bolts
and TV Washers. Use TV Spacers if necessary.
I&*G419/-*]C#*+-*C"^
]'7*=/9/((1-W^
I&*O<1)/*
]_^
T+,=)'=8*
Z+</*+=*I&
I&*R1(3/-
]Cd*D*C_^
I&*U+<)
]"*D*F^
Page 7@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6Item 64357
GH@;IJKLGIHMMHIKNLOHPIG*MKGI
T+,=)'=8*K=()-,9)'+=(*7+-*&;GH*"dd*\*_dd
1. Attach TV Plate (2) to Horizontal Bars (20), using Bar Bolts (22) and Bar Washers (23).
Z+-'c+=)1<*
U1-*]_d^
I&*O<1)/*
]_^
U1-*R1(3/-
]_#^
U1-*U+<)
]__^
2. Attach Horizontal Bars to Mounting Holes on TV using appropriate
TV Bolts and TV Washers. Use TV Spacers if necessary.
I&*G419/-*]C#*+-*C"^
]'7*=/9/((1-W^ T+,=)'=8*
Z+</*+=*I&
I&*R1(3/-
]Cd*D*C_^
I&*U+<)
]"*D*F^
Z+-'c+=)1<*
U1-
Page 8 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6 Item 64357
GH@;IJ KLGIHMMHIKNL OHPIG*MKGI
T+,=)'=8*K=()-,9)'+=(*7+-*&;GH*#dd*\*#ddB*"dd*\*"ddB*!dd*\*"dd
1. Attach Vertical Bars (21) to Mounting Holes
on TV using appropriate TV Bolts and
TV Washers. Use TV Spacers if necessary.
2. Attach Horizontal Bars (20) to Vertical Bars,
using Bar Bolts (22) and Bar Washers (23).
3. Attach TV Plate (2) to Horizontal Bars, using
Bar Bolts (22) and Bar Washers (23).
Z+-'c+=)1<*
U1-*]_d^
&/-)'91<*
U1-*]_C^
I&*O<1)/*
]_^
U1-*
R1(3/-
]_#^
U1-*U+<)
]__^
U1-*U+<)
]__^
I&*U+<)
]"*D*F^
I&*R1(3/-
]Cd*D*C_^
I&*G419/-*]C#*+-*C"^
]'7*=/9/((1-W^
T+,=)'=8*
Z+</*+=*I&
U1-*
R1(3/-
]_#^
C
_
#
Page 9@+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6Item 64357
GH@;IJKLGIHMMHIKNLOHPIG*MKGI
T+,=)*I&*)+*R1<<*T+,=)
1. Attach TV Plate Washer (16) and Nut (15) to Upper
Post using included Wrench. Do not tighten Nut.
I&*O<1)/*
L,)*]C$^
I&*O<1)/*
R1(3/-*]C!^
[44/-*
O+()
2. Using an assistant, lift TV, slide TV Plate
Nut over Notch on TV Mount and route
Lower Posts through Lower Post Holes.
M+./-*
O+()(
L+)93
M+./-*
O+()*Z+</(
I&*O<1)/*
L,)
3. Attach TV Plate Washers (16) and
Nuts (15) to Lower Posts using included
Wrench. Do not tighten Nuts.
4. Level TV, then tighten Nuts on Upper
and Lower Posts securely.
I&*O<1)/*
R1(3/-*]C!^
I&*O<1)/*
U+<)*]C$^
5. Route TV wires through clips.
Q<'4(
Page 10 @+-*)/93='91<*A,/()'+=(B*4</1(/*91<<*CDEEEDE!!D$%F%6 Item 64357
GH@;IJ KLGIHMMHIKNL OHPIG*MKGI
OM;HG;*P;HV*IZ;*@NMMNRKLS*QHP;@[MMJ
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST IN THIS MANUAL
AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO
MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES
THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
P/9+->*O-+>,9)a(*G/-'1<*L,:0/-*Z/-/2*
L+)/2 If product has no serial number, record month and year of purchase instead.
L+)/2 Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
H>X,():/=)
1. Adjust Tilt if desired:
a. Loosen Tilt Adjustment Nuts on Wall Mount
(behind TV Plate) with included Wrench.
b. Adjust tilt.
c. Tighten Tilt Adjustment Nuts.
L+)/2 Gently move the TV when changing its position.
Do not force it or press on the screen directly.
I'<)*H>X,():/=)*
L,)(
Indice
Altri manuali Armstrong Rack e supporto
