TECH. MANUAL
Step 3: Putting the banknotes into the banknote holder and forwarding the banknote
to touch the starting sensor.
Step 4: The machine will count automatically. The counting result should be correct
as user preset on the LED display.
Step 5: The banknote holder will release automatically (wait about 3 sec) after this
counting process if this operation is correct.
Step 6: The buzzer will alarm if the counting number is less than the preset number.
That means ERROR and the banknote holder will not release. The user should
press the button of Reset for resetting banknote holder.
※The Manual Function :
Step 1: Press the button of Manual to select this function then the buzzer will alarm
with the opening of banknote holder. The machine is ready for using now
Step 2: Putting the banknotes into the banknote holder and forwarding the banknote.
It will not count automatically, you have to press one more time then the function of
starting sensor will be released.
Step 3: Press this button again for starting the counting process.
Step 4: the counting number will be showed on the LED display after this process.
※The ACC & Clean Function :
Step 1: Press the button of Check, Free, Preset or Manual to select the counting
mode.
Step 2: Re-press the ACC button after the counting mode selected. (The lower part
of LED display will show the number of “0” for starting the counting processing. ) It
will also show the accumulating number in the LED.
Step 3: The ACC feature is using automatically if the counting process is correct. It
will not operate if the counting process is incorrect. The Clean key is used to delete
the present counting result if the user doesn’t want it to be added to the ACC.
Step 4: Press again for releasing ACC.
