Arrakis Systems ARC BLUETOOTH Guida rapida

OPTIONAL BLUETOOTH OPERATIONAL

INSTRUCTIONS

Revision 1.0.2

Jan 16, 2014

Firmware version: Arrakis 1.1

Congratulations on your pur hase of an ARC series onsole. One possible feature with your

onsole is the Bluetooth hannel. This se tion of the manual will assist with the operation of

the Bluetooth feature.

Bluetooth is an optional feature for the ARC series consoles (ARC-10 series & ARC-15). The Part

number in the or er will specify 'blue' at the en , if you have purchase a Bluetooth version. For

example, the ARC-10BP-blue has Bluetooth, but the ARC-10BP oes not.

On your ARC series onsole, you will

noti e your Bluetooth ontrols on the

left side of the meter panel. The

antenna is lo ated on the top, and

there are 2 buttons with spe ifi tasks.

Bluetooth audio will play out the

Bluetooth hannel (CH 10 for ARC-10,

CH 15 for ARC-15). This is the phone

hybrid hannel, and may alternatively

be used with your phone hybrid. The

phone and Bluetooth audio sums into

this hannel.

Operational Instructions:

HOW TO PAIR

To onne t your ell phone, tablet, or Bluetooth devi e to the onsole:

1. Power up your ARC onsole. If already powered on, then leave the onsole on.

2. Press and hold the green Call button for exa tly 5 se onds, and then release.

You will hear a beep on the Bluetooth hannel.

3. You will noti e the red Drop button will now blink on your onsole. This means it

is ready to onne t. In your ell phone, tablet, or other devi e, turn on the

Bluetooth option. You will have 10 minutes to pair. After the 10 minutes, it will

still flash, but you will need to start ba k at step 1 to pair.

4. In your devi e settings, sele t Search for devices. This step is different

depending on the devi e you are onne ting.

5. Your devi e should find ARRAKIS 1 X (X = the firmware version). Sele t to

onne t.

6. Now that your devi e is paired, the red Drop button should now be onstant lit.

7. After your devi e is paired, you will only need to re onne t within your devi e. It

is as simple as finding the Bluetooth devi e and sele t the option to Conne t.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 1 of 8

HOW TO CONNECT TO AN ANDROID DEVICE

Here's an example using an Android ell phone with the Jellybean

OS:

1. Go to Settings.

2. Turn on the Bluetooth feature.

3. Sele t Sear h for devi es.

4. Find and sele t the ARRAKIS 1 1

(firmware number may be different)

5. It will now pair with the ARC

onsole.

These steps will vary based on the manufa turer of your devi e. Please see the devi e

instru tions on how to onne t to a Bluetooth devi e (your ARC series onsole).

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 2 of 8

HOW TO CONNECT TO A WINDOWS 8 1 DEVICE

Here's an example using an Android ell phone with the Jellybean OS:

Under Windows 8.1 , the Bluetooth option has been moved to a new se tion:

•Press the Windows key + C to open the Charm Bar.

•Cli k on Settings and sele t PC settings.

•In the new window that opens, go to the PC and devi es se tion.

•A tivate the Bluetooth option.

Connecting a Tablet to the Bluetooth.

Go to your Bluetooth Manager menu.

1. In Windows 8.1 swipe from the right hand side. You will now see a menu.

2. Press the Settings button at the bottom.

3. Now press Change PC Settings you will be in the PC and devices menu.

4. Sele t Bluetooth, now press the On button.

5. Your tablet will start s anning and you should see the ARRAKIS 1 1 Ready to pair

Sele t it.

6. It will show a Pair button to the right, press it.

7. When paired it will show ARRAKIS 1 1 Connected.

When playing musi from your tablet the Green Call button will light when you are in the play

mode.

The Red Drop button will light when you have stop playing the file. The buttons will not start

or stop a file it is used only for the phone fun tions.

To dis onne t the Tablet sele t the ARRAKIS 1 1 Connected press the Remove device

button. You will be asked are you sure press the “Yes” button to onfirm.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 3 of 8

HOW TO CONNECT AND USE A CELL PHONE

The Bluetooth feature of the ARC series onsole allows you onne t your ell phone to

the ARC series onsole. Thus, enabling you to take alls on your ell phone and either

put them on air, or re ord the all on the Audition

bus. To do this:

1. Pair your ell phone to the Bluetooth ARC

onsole using the steps from the previous

se tion. The red Drop button will be lit if

your ell phone is onne ted.

2. Turn on the Bluetooth hannel on your

board. (CH 10 for the ARC-10, CH 15 for

the ARC-15)

3. Put the Bluetooth hannel either on PGM

to put the aller on-air, or AUD if you want to put the aller on the AUD output.

4. When a all omes in on your ell phone, you will noti e that the green Call

button will flash. Press the green Call button to a ept the all. Press the red

Drop button to reje t ( lear) the all.

5. When you are finished with the all, press the red Drop button to end the all.

You may also a ept, reje t or drop the all using your ell phone.

IMPORTANT NOTE: When talking to the caller, you will be using the Mic channel on

the console (NOT your cell phone mic). When a Mic channel is on, then the Monitor

speakers will be mute , an you will only be able to hear the caller through the

Headphone output. You may also a just the volume of your caller on your phone, as well as

on the console's Bluetooth channel.

IMPORTANT NOTE: When a call comes in to your cell phone, the ring will play

through the Bluetooth channel. For the best quality soun , we recommen to leave

the Bluetooth channel on the AUD output for when the call comes in. That way the

ring will not play over the air. You can then prepare the caller, an when rea y, switch the

channel to PGM to put the caller on air.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 4 of 8

HOW TO STREAM AUDIO

The Bluetooth feature for the ARC series onsole allows you to play musi or audio

from a Bluetooth enabled devi e, su h as a Tablet, MP3 player, or re order. To stream

audio:

1. Pair your devi e using the instru tions

from the first se tion, HOW TO PAIR.

The red Drop button will now be lit if

your devi e is onne ted.

2. Any audio played from your devi e will

now play out the Bluetooth hannel on

the onsole. The red Drop and green

Call button do not ontrol any tasks for

playing media. You may ontrol the audio

volume from your devi e (tablet, MP3

player, phone, et ...) or from the Bluetooth hannel on the onsole.

IMPORTANT NOTE: It is strongly recommen e that you o not use a cell phone to

stream music over the air. If a call comes in on your phone, it will interrupt what is

currently playing an will ring over the air. It is recommen e to use a Tablet, or MP3

player to stream music, so that there isn't a possibility of interruption.

HOW TO UNPAIR AND PUT INTO PAIRING MODE

The Bluetooth feature for the ARC series onsole an only onne t to one Bluetooth

devi e at a time. This prevents the possibility of a se ond devi e a identally

onne ting and putting unintentional audio over the air. To unpair a onne ted devi e,

and then pair a different devi e:

1. The first option is to find the ARRAKIS 1 X. on your devi e and sele t to unpair

within your devi e. More instru tions an be found in your devi e manual.

2. Another method is to press and hold the green Call button for exa tly 5 se onds

and then release. This will take whatever devi e that was onne ted, and pla e

it into Pairing mode. Follow the steps from the first se tion, HOW TO PAIR, to

then pair a new devi e.

As a se urity feature, your ARC Bluetooth onsole is only Pairable for a set amount of

time. If you sear h for devi es when trying to Pair, and don't find the ARRAKIS 1 X.,

then you may have to press the green Call button for 5 se onds to put it into Pair

mode.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 5 of 8

RENAME A BLUETOOTH ARC CONSOLE ON YOUR DEVICE

If you have multiple Bluetooth ARC onsoles, then it may be ne essary to rename the

ARRAKIS 1 X. for easier identifi ation. This way it will be easier to identify whi h

Bluetooth onsole is whi h. You may a omplish this on your Bluetooth devi e. Here's

an example using an Android (Jellybean OS) devi e:

1. Go into settings.

2. Sele t the Bluetooth

settings.

3. Sele t the settings for

the ARRAKIS 1 1.

4. Sele t the Rename

option.

5. Change the name for

the devi e.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 6 of 8

QUICK REFERENCE GUIDE

HOW TO PAIR YOUR DEVICE

1. Press and hold the green Call button for 5 se onds to put into Pair mode. You

have 10 minutes to onne t.

2. Sear h for ARRAKIS 1 X. and onne t.

CELL PHONE MODE

Call (green) button (qui k press) – A epts all when all is oming in.

Drop (red) button (qui k press) – Reje ts all when all is oming in.

Drop (red) button (qui k press) – Ends all if all has been taken.

INACTIVE MODE

Call (green) button (5 se ond hold) – Set to Pair mode.

BUTTON LIGHTING STATES

Flashing Red – No devi e onne ted, ready to Pair.

Solid Red – Devi e onne ted, no audio playing from devi e.

Flashing Green – A all is oming in on your devi e.

Solid Green – Audio is playing out your Bluetooth devi e.

ANTENNA RANGE = 25 feet, dire t line of sight to antenna.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 7 of 8

TROUBLESHOOTING & TIPS

TROUBLE PAIRING A DEVICE

If you are having trouble pairing a devi e. Try these steps:

1. Power down, and then power up your ARC onsole.

2. Press and hold the green Call button for exa tly 5 se onds, and then release.

You will hear a beep on the Bluetooth hannel.

3. You will noti e the red Drop button will now blink on your onsole. This means it

is ready to onne t. In your ell phone, tablet, or other devi e, turn on the

Bluetooth option. You will have 10 minutes to pair. After the 10 minutes, it will still

flash, but you will need to start ba k at step 1 to pair.

4. In your devi e settings, sele t Search for devices. This step is different

depending on the devi e you are onne ting.

5. Your devi e should find ARRAKIS 1 X (X = the firmware version). Sele t to

onne t.

6. Now that your devi e is paired, the red Drop button should now be onstant lit.

USEFUL TIPS

*It is always re ommended to have only one devi e onne ted at a time. If your station

will be onsistently hanging onne ted devi es, then it is re ommended to unpair the

devi e when you are done using it. That way it will be easier for the next user to pair

and onne t their different devi e.

**As a note, not all devi es will have full Bluetooth fun tionality. Some phones may

onne t for alls, but not be able to stream musi , and vi e versa.

***If your studio is only using one devi e, then it isn't ne essary to pair and re-pair the

devi e every time you are using it. Rather, it is more effe tive to onne t (if not already

onne ted) dire tly from the devi e's menu.

Arrakis Systems 970-461-0730 – www.arrakis-systems.com pg 8 of 8

Indice

Altri manuali Arrakis Systems Mixer musicale

Arrakis Systems

Arrakis Systems ARC-MIC-PRE Manuale utente

Manuali Mixer musicale popolari di altre marche

Neve

Neve 8816 Manuale utente

Mackie

Mackie Onyx Analogue Mixer Manuale utente

Behringer

Behringer EUROPOWER PMP518M Manuale utente

Peavey

Peavey S-32 Sanctuary Series Manuale utente

Rane

Rane MP 4 Manuale utente

True

True T9 Touchscreen Console Manuale utente

Studiomaster

Studiomaster Air Pro 24 Manuale utente

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manuale utente

Roland

Roland M-160 Manuale utente

Yamaha

Yamaha MR1642 Manuale utente

Ecler

Ecler MAC40v Manuale utente

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manuale utente

Veeder-Root

Veeder-Root TLS-350 Series Manuale utente

Alto

Alto APM80.QUAD Manuale utente

Omnitronic

Omnitronic PM-211 Manuale utente

SoundCraft

SoundCraft B400 Manuale utente

Roland

Roland SoundCanvas SC-8820 Manuale utente

CARVIN

CARVIN RX 1200 Manuale utente