ARRI DEP-1 Manuale utente
Digital Encoder Pedals
DEP-1
U S E R M A N U A L
01.07.2022
Disclaimer 2
1 Disclaimer
Before using the products, be sure to read and understood all respective instructions.
The products are available for commercial customers only.
For product specification changes since this manual was published, refer to the latest publications of
ARRI data sheets or data books, etc., for the most up-to-date specifications. Not all products and/or
types are available in every country. Please check with an ARRI sales representative for availability and
additional information.
ARRI assumes no responsibility for any errors that may appear in this document. The information is
subject to change without notice.
While ARRI endeavors to enhance the quality, reliability and safety of their products, customers agree
and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risk of damage to property or injury (including death) to persons arising from defects in the products,
customers must incorporate sufficient safety measures in their work with the system and have to heed
the stated canonic use.
ARRI or its subsidiaries expressly exclude any liability, warranty, demand or other obligation for any
claim, representation, or cause, or action, or whatsoever, express or implied, whether in contract or tort,
including negligence, or incorporated in terms and conditions, whether by statue, law or otherwise. In
no event shall ARRI or its subsidiaries be liable for or have a remedy for recovery of any special, direct,
indirect, incidental, or consequential damages, including, but not limited to lost profits, lost savings, lost
revenues or economic loss of any kind or for any claim by third party, downtime, good will, damage to or
replacement of equipment or property, any cost or recovering of any material or goods associated with
the assembly or use of our products, or any other damages or injury of the persons and so on or under
any other legal theory.
Neither ARRI nor its subsidiaries assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from the use of ARRI products or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property right of ARRI or others.
ARRI or its subsidiaries do not assume any responsibility for incurred losses due to improper handling
or configuration of the camera or other system components, due to sensor contamination, occurrence
of dead or defective pixels, defective signal connections or incompatibilities with third party recording
devices.
In the case one or all of the foregoing clauses are not allowed by applicable law, the fullest extent
permissible clauses by applicable law are validated.
Imprint 3
2 Imprint
© 2022 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved.
The system contains proprietary information of Arnold & Richter Cine Technik GmbH & Co. Betriebs
KG; it is provided under a license agreement containing restrictions on use and disclosure and
protected by copyright law. Reverse engineering of the software is prohibited.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written
permission of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
Due to continued product development the information in this document may change without notice.
The information and intellectual property contained herein is confidential between ARRI and the client
and remains the exclusive property of ARRI. If you find any problems in the documentation, please
report them to us in writing. ARRI does not warrant that this document is flawless.
ARRI and the Digital Encoder Pedals DEP-1 are trademarks or registered trademarks of Arnold &
Richter Cine Technik GmbH & Co. Betriebs KG. All other brands or products mentioned are trademarks
or registered trademarks of their respective holders and should be treated as such.
For Further Assistance
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Herbert-Bayer-Strasse 10
D-80807 Munich
Germany
E-mail: [email protected]
www.arri.com/en/technical-service
Content 4
3 Content
1 Disclaimer.......................................................................................................................... 2
2 Imprint................................................................................................................................ 3
3 Content...............................................................................................................................4
4 About this Document....................................................................................................... 5
5 About the Product............................................................................................................ 6
5.1 Audience and Intented Use..............................................................................................6
5.2 Identification...................................................................................................................... 7
5.3 Environmental Conditions................................................................................................. 7
5.4 Technical Data.................................................................................................................. 7
5.5 Dimensional of Drawing....................................................................................................8
5.6 Scope of Delivery and Warranty...................................................................................... 9
5.7 Declarations of Conformity............................................................................................... 9
6 Safety Instructions..........................................................................................................12
6.1 Safety Conventions and Product Labels........................................................................ 12
6.2 General Safety Instructions............................................................................................ 13
7 Overview Digital Encoder Pedals DEP-1......................................................................16
8 Installation and Operation............................................................................................. 17
8.1 Mechanical Setup........................................................................................................... 17
8.2 Host and Client Pedal Setup..........................................................................................18
8.3 Analog Connection......................................................................................................... 18
8.4 LBUS Connection and Cables....................................................................................... 18
8.5 Assigning functions.........................................................................................................19
8.6 Remote Control Setup.................................................................................................... 19
8.6.1 Assigning the Digital Encoder Pedals DEP-1.............................................................. 19
8.6.2 Additional Controls Setup............................................................................................. 20
8.6.3 Dead Band....................................................................................................................20
8.6.4 Sensitivity for Control Devices..................................................................................... 20
8.6.5 Filter.............................................................................................................................. 21
8.6.6 Ratio..............................................................................................................................21
9 Cleaning and Repair.......................................................................................................22
9.1 Cleaning Instructions...................................................................................................... 22
9.2 Repair..............................................................................................................................22
10 Transportation and Storage...........................................................................................23
11 Disposal........................................................................................................................... 24
12 ARRI Service Contacts...................................................................................................25
About this Document 5
4 About this Document
This user manual is aimed at everyone involved in using the system and provides directions on how to
operate it safely and as intended. To ensure safe and correct use, all users must read the user manual
before using the accessories for the first time.
This user manual is an essential part of this product and must be easily accessible and in proximity to
the equipment so that users can use it as a reference anytime.
Keep this user manual and all other operating and assembly instructions belonging to the system in a
safe place for future reference and possible subsequent owners.
Document Revision History
Version Release Date Description
1.0 01.07.2022
1.1 01.09.2022
About the Product 6
5 About the Product
What is it?
The Digital Encoder Pedals DEP-1, represent another new member of the LBUS controller range.
What does it do?
With a pair of the Digital Encoder Pedals DEP-1 you can control a selected axis of the Stabilized
Remote Head, like Tilt-Pan, Roll, or a selected axis of the focus, iris, or zoom function.
How does it work?
As with the Digital Remote Wheels and Digital Encoder Head, the Digital Encoder Pedals DEP-1
follow the LBUS daisy chain philosophy. Each of the two pedals allows a movement in the previously
programmed direction.
For example: If the pedals are assigned to the roll axis, the left pedal will move the camera up left, while
the right pedal will move the camera up right.
What problems does it solve?
In combination with the Digital Remote Wheels or Digital Encoder Head, the operator can now operate
all three axes (tilt, pan and roll) of the remote head at the same time. In the future, the pedals can also
be assigned to dollies. Then the operator can use the pedals to drive the dolly right and left, while
controlling the remote head with his hands.
5.1 Audience and Intented Use
ATTENTION
All versions of the product are intended exclusively for professional use and may only be used
by skilled personnel. Every user should read and understand the operating instructions and the
user manual. Use the product only for the purpose described in this document. Always follow the
instructions and system requirements for all equipment involved.
About the Product 7
5.2 Identification
5.3 Environmental Conditions
The product should only be used and stored under certain environmental conditions. Check the
following conditions before commissioning and operation:
Electrical Requirements Input voltage: 10.6 - 33.6 V DC
Operating Temperature -20° C to +45° C / -4° F to +113° F
Storage Temperature -30° C to +70° C / -22° F to +158° F
Humidity 95% relative humidity max, non condensing
5.4 Technical Data
ATTENTION
The Peli Case is not included.
Weight: Master pedal
Slave pedal
Analog RS Cable
740 gr / 1.64 lbs
730 gr / 1.60 lbs
50 gr / 0.11 lb
Dimensions (one pedal): L= 251,0 mm x W= 70mm x H= 70mm ( Host and also
Klient )
L 9.92“ - W 2.75“ - H 2.75“
Power supply voltage: 10,5 V – 33,6 V DC
Max. 4A
DEP-1 Master
LBUS 2x 4pin Lemo / 24V max. 4 A
Analog In 3pin Fischer / 12V max. 1 A
DEP-1 Host
Interfaces:
Analog Out 3pin Fischer / 12V max. 1 A
About the Product 8
Peli Case Air 1507
Foam inlay dimensions for : L 385mm - W 289mm - H 216mm
L 15.15“ - W 11.38“ - H 8.5“
Pin Out
LBUS Analog In / Out
5.5 Dimensional of Drawing
About the Product 9
5.6 Scope of Delivery and Warranty
ATTENTION
The packaging consists of recyclable materials. For the sake of the environment, dispose of the
packaging material at a suitable disposal site.
Always store, ship and dispose according to local regulations. ARRI is not liable for consequences
from inadequate storage, shipment or disposal.
On delivery, please check if package and content are intact. Never accept a damaged delivery.
Warranty
For scope of warranty, please ask your local ARRI Service Partner. ARRI is not liable for consequences
from inadequate shipment, improper use or third-party products.
5.7 Declarations of Conformity
Approval Information
The Digital Encoder Pedals DEP-1 is approved for use in Europe (CE), USA (FCC), UK (UKCA),
Kanada (ICES), China (CMIIT), Japan (MIC), Australien (SDoC), Korea (ICC), Thailand (SDoC) and
where one of those declarations are accepted.
The import and use in other countries may be subject to legal, official or regulatory requirements
and regulations. It is the importer's or the user's responsibility, prior to importation or use, to inform
themselves of the applicable legal, regulatory and administrative requirements and regulations and
to ensure compliance with these requirements and regulations. This includes the applying for and
obtaining of all necessary approvals or registrations.
As far as reasonable and legally possible, ARRI will support requests in relation to such applications by
providing technical documents or declarations. As an importer or user, you confirm that you are familiar
and comply with the legal, regulatory, and administrative requirements and regulations that apply in
the countries to which you ship or use the products. You further confirm that you will arrange for any
necessary registrations, enrollments, or authorizations that are required in such countries.
You release ARRI from all obligations resulting from any legislative, regulatory, or administrative
requirements regarding import or use of the products, except in countries where ARRI has obtained
a registration or certification. You agree to indemnify, defend, and hold ARRI harmless from any and
all claims, damages, losses, liabilities, costs, and expenses (including reasonable fees of attorneys
and other professionals) that may arise out of a demand on ARRI in connection with your obligations
mentioned above.
About the Product 10
EU Declaration of Conformity
Brand Name:
Product Description:
ARRI
Digital Encoder Pedals DEP-1
The designated products conform to the specifications of the following European directives:
Directive 2014/30/EU of the European Parliament and the Council of 26 February 2014 on the
harmonization of the laws of the Member States relating to electromagnetic compatibility
Directive 2011/65/EU of the European Parliament and the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in electrical and electronic equipment and the
Commission Delegated Directive (EU) 2015/863 of March 31, 2015.
The compliance with the requirements of the European Directives was proved by the application of the
following standards:
EN 55032:2015
EN 55035:2017
IEC 62368-1:2018
The object of the declaration described above complies with the provisions of Directive 2011/65/EU
of the European Parliament and the Council of June 8, 2011 on the restriction of the use of certain
hazardous substances in electrical and electronic equipment and the Commission Delegated Directive
(EU) 2015/863 of March 31, 2015.
The manufacturer bears sole responsibility for issuing this declaration of conformity.
UK Declaration of Conformity
Brand Name:
Product Description:
ARRI
Digital Encoder Pedals DEP-1
The designated products conform to the specifications of the following United Kingdom regulations:
The Electromagnetic Compatibility Regulations 2016 (SI 2016 No. 1091 as amended by SI 2019
No. 696)
The Electrical Equipment (Safety) Regulations 2016 (SI 2017 No. 1206 as amended by SI 2019 No.
696)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 (SI 2012 No. 3032 as amended by SI 2020 No. 1647 SI 2021 No. 422 and SI
2019 No. 492)
The compliance with the requirements of the United Kingdom regulations was proved by the
application of the following standards:
EN 55032:2015 + A11:2020;
EN 55035:2017 + A11:2020
IEC 62368-1:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.
FCC Class B Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
Indice
Altri manuali ARRI Accessori per fotocamere
ARRI
ARRI LMB-6 Manuale utente
ARRI
ARRI ARRILITE 750 Plus Manuale
ARRI
ARRI SRH-360 Manuale utente
ARRI
ARRI K2.47050.0 Manuale utente
ARRI
ARRI SRH-360 SUP 3.0 Manuale utente
ARRI
ARRI IVS Manuale utente
ARRI
ARRI LMB 6x6 Manuale utente
ARRI
ARRI CCM-1 Manuale utente
ARRI
ARRI MAXIMA QL Manuale utente
ARRI
ARRI Master Grip MRW-1 Manuale utente
ARRI
ARRI TRINITY 2 Manuale utente
ARRI
ARRI SRH-3 Manuale utente
ARRI
ARRI Mattebox MB-20 Manuale utente
ARRI
ARRI SRH-3 Manuale utente
ARRI
ARRI MAXIMA Manuale utente
ARRI
ARRI ICS-1 Manuale utente
ARRI
ARRI LMB 4x5 Manuale utente
ARRI
ARRI arrilux 400 lighthouse Manuale utente
ARRI
ARRI ARRIHEAD II Manuale utente
ARRI
ARRI IVS Manuale utente
