Ash Fusion Manuale utente

USER MANUAL

Page 1
Important Instructions for Use
The following instructions and warnings must be
observed:
•Remove Fusion and its power supply adapter from
the carry case during use.
•Use only the power supply adapter provided.
•Do not use Fusion in a bathroom, near water or
other damp conditions.
•Do not touch or place anything into the opening in
the mouse base.
•Do not open Fusion - there are no user serviceable
parts inside and opening it will invalidate your
warranty.
•Do not dispose of Fusion by fire. It should be
recycled or disposed of in accordance with local
ordinances.

Page 2
Table of Contents
Installation........................................................ 3
Mouse Camera ................................................. 5
Mouse Controls................................................ 6
Main Unit Controls ......................................... 8
Menu ................................................................. 8
Main Menu................................................... 10
Display Settings Menu................................. 10
Options Menu............................................... 11
Toggle on/off functions Menu ..................... 12
Mouse button functions Menu ..................... 12
Writing with Fusion ..................................... 13
Battery ............................................................ 14
Maintenance ................................................... 16
Technical Description.................................... 16
Warranty ........................................................ 17

Page 3
Installation
The Fusion is supplied the following components:
oMain unit incorporating the mouse camera
oPower supply adapter/charger
oMains cable
oCarry case
oCleaning cloth
When setting up, it is important to choose your
workplace carefully to avoid an uncomfortable or
awkward position. You should not have to raise your
arm to use the mouse; your wrist should be on the
resting on the surface. The display should be below
eye level to avoid strain.

Page 4
•Remove the Fusion main unit from its case and
place on the work surface.
•Flip open the lid by pressing on the front latch.
•Power up the Fusion by pressing the power
button, i.e. the right-most button on the front
panel.
When you place the unit on some text you should see
the magnified image on the screen. The base of the
main unit is fitted with rollers to allow the entire unit
to glide easily over what you want to read. Note: the
camera “sees” beneath the scroll zoom wheel, bear
this in mind when locating what you want to read.

Page 5
Mouse Camera
Fusion is great for reading something in a hurry; flip
up the lid, turn it on, and off you go. However, for
extended reading you will find it easier to use the
mouse outside the main unit. To remove the mouse,
flip open the cable housing cover, lift out the mouse
and unwind the cable.
You will find that the mouse is much lighter and
more agile, allowing you to get into the binding of
books or reading in awkward places.
When replacing the mouse, lift the cable housing
cover, drop it back into its holder, wind up the cable
and close the cover again.

Page 6
Mouse Controls
Scroll-Zoom wheel: The rubberized wheel on the
mouse controls the magnification of the camera.
Rotating the wheel forward increases the
magnification; backwards decreases it.
Overview: Rotate the scroll-zoom wheel fully
backwards and at the end of the travel you will feel a
small click as the camera goes into overview mode.
This changes the camera’s focus to allow you to raise
the camera above the page and get an overview of
where you are reading, or read into awkward places,
to write using the mouse or to view objects that are
not flat. The magnification level cannot be altered in
overview mode.
Don’t forget to rotate the scroll-zoom wheel forwards
slightly when you return to reading or the image will
be out of focus.
Buttons: The mouse has two buttons on it, located on
the grey ring around the scroll zoom control. The
right button controls the display mode; clicking this
button will switch between full-color mode, negative
and positive reading modes.

Page 7
•Full-color mode for viewing photographs,
images, etc.
•Positive mode, an enhanced reading mode
where the foreground “ink” is darker than the
background “paper”.
•Negative mode, an enhanced reading mode
where the foreground “ink” is brighter than the
background “paper”.
The left button can be programmed to perform a
choice of tasks (see “Mouse button functions menu”
on page 12).
Pressing both buttons together will bring up
the battery symbol indicating the state of
charge of the battery.

Page 8
Main Unit Controls
Power Button: Press to power-on the unit. Press
again to power off. The unit will also be powered off
by closing the display lid.
The last used settings are stored at power off and are
restored when the unit is switched on again.
Rotary Knob: The central control knob can be
rotated freely in both directions and pressed.
Normally it controls the image brightness.
Menu
Press and hold the rotary knob for three seconds to
access the menu. By rotating the knob, you can
navigate through the menu, pressing to accept an
option.
An overview of the menu system appears overleaf.
Each sub-menu is explained in the subsequent
sections.
All sub-menus have an exit icon, , select it to exit
the menu. Some menus offer an on/off choice; select
or as appropriate to confirm your selection.

Page 9
Main Menu
Options Menu
Reset to factory defaults
Information Panel
Button Function Menu
Toggle On/Off Function Menu
Display Setting Menu
Indice
Altri manuali Ash Macchina fotografica digitale


















