▸ Program configuration memory 44
▸ Program differentially 44
▸ Differential program data memory 44
▸ Mass Production 44
Device ➙ Read 44
▸ Read all 44
▸ Read all except data memory 44
▸ Read code/main memory 45
▸ Read data memory 45
▸ Read configuration memory 45
Device ➙ Verify 45
▸ Verify all 45
▸ Verify all except data memory 45
▸ Verify code/main memory 45
▸ Verify data memory 45
▸ Verify configuration memory 45
Device ➙ Erase 45
▸ Erase all 45
▸ Erase code/main memory 46
▸ Erase data memory 46
Device ➙ Blank check 46
▸ Blank check all 46
▸ Blank check all except data memory 46
▸ Blank check of code/main memory 46
▸ Blank check of data memory 46
▸ Blank check of configuration memory 46
Device ➙ Select device 46
Options Menu 47
Options ➙ Program settings ➙ Programming 47
▸ Reload file before every programming 47
▸ Ask before erasing 47
▸ Ask before programming of OTP / Flash /
Code/Data Protection / differential 47
▸ Display fuse warning messages 47
▸ Except for programming: Close status
window 47
▸ After programming: Close status window 47
▸ Beep after successful finishing 47
▸ Beep after unsuccessful finishing 47
▸ Turn off all sound for UP 48
▸ Slower switching of voltage with ICSP 48
▸ Do not perform blank check before cfg
word programming 48
▸ Do not perform blank check after erasing 48
▸ Do not erase device before programming 48
▸ Do not erase data memory before its
programming 48
▸ Do not verify unprogrammed words at the
end of the memory 48
▸ Do not verify 48
▸ Verify with two supply voltages 49
Options ➙ Program settings ➙ Panels 49
▸ Display selected device on toolbar 49
▸ Display selected programmer on toolbar 49
▸ Display the status bar in the lower part of
the window 49
▸ Display icons on toolbar buttons 49
▸ Display descriptions on toolbar buttons 49
▸ Show mass production counter in status
bar 49
Options ➙ Program settings ➙ Files 49
▸ File save style 49
▸ Automatically check for newer versions of
actual file 50
▸ Check device type when loading .hex file 50
▸ Save device type into .hex file 50
▸ Warn when loaded file does not contain
CFG memory data 50
▸ Binary file loading and saving style 50
▸ Save unused locations to .hex file 50
▸ Clear code/main / data memory / ID
positions before file reading 50
▸ Erase configuration memory before file
reading 50
▸ Read data memory not from the file but
from the device 51
▸ Read ID positions not from the file but
from the device 51
