Asoni SVR440 Manuale utente
4CH Network Video Server
SVR440 / SVR440W
User’s Manual
Date: 6/05/2009
Firmware Version: V2.2.16
1
Content
1. Preface .................................................................................................................................2
2. Product Specifications...........................................................................................................2
3. Product Installation ...............................................................................................................4
A. Hardware Installation.........................................................................................................4
B. Monitor Setting..................................................................................................................8
C. IP Assignment ...................................................................................................................9
D. Install ActiveX Control .....................................................................................................11
4. Live Video...........................................................................................................................13
5. Configuration ......................................................................................................................17
A. System............................................................................................................................17
B. A/V Setting......................................................................................................................22
C. Network...........................................................................................................................25
D. Event Handling................................................................................................................31
6. Network Configuration ........................................................................................................38
A. Intranet Only....................................................................................................................38
B. Internet Only....................................................................................................................40
C. Intranet + Internet............................................................................................................42
7. Factory Default ...................................................................................................................45
Compatible List of SD Card........................................................................................................46
2
1. Preface
This device is a 4 channel video server. It builds in web server. User views real-time video
via IE browser.
This device encodes analogue signals of traditional cameras to digital signals, it supports
MPEG-4 and MJPEG video compression which provides smooth and high quality video.
Also, it supports SD backup, the event video can be stored in the inserted SD Card, and
can be playback remotely. The 2-way audio provides the user to have a video conference.
In addition, the user can control this device with an easy-control user interface via IE
browser to build a home surveillance.
2. Product Specifications
MPEG-4 / MJPEG compression formats.
Self-Contained HTTP Web Server providing Internet capability for remote access
RS-485 connection for remote Pan/Tilt/Zoom control
Wireless network connection (Wireless model)
Supports SD Card for local event recording
2-way audio
Online firmware upgrade
Compatible with Microsoft Windows Media Player
Hardware
CPU ARM 9, 32 bit RISC
RAM 64MB
ROM 8MB
Video Input 4 Analog video input (BNC connectors)
Video Loop Back 4 Analog video output (BNC connectors)
Audio In / Out 1 Line in / 1 Line out (RCA connectors)
Digital Input 4 In
Relay Output 4 Out
RS-485 1, for PTZ control
Power Supply DC 12V, 1A
Dimensions W218 x H44 x D202 mm
3
Network
Ethernet 10/ 100 Base-T
Wireless (Wireless model) 802.11b/g, supports WPA-PSK, WEP 64/ 128 bit
Network Protocol HTTP, TCP/IP, NTP, SMTP, FTP, PPPoE, DHCP, DDNS
System
Video Resolution VGA(640x480), CIF (352x240), QCIF (176x120)
Compression Format MPEG-4, MJPEG
Frame Rate Up to 30 FPS (4CH total)
Video Bitrate Adjustment CBR, VBR
Video Adjust Brightness, Contrast, Saturation, Hue
Image Snapshot Yes
Motion Detection Yes, 4 areas (1 area per channel)
Triggered Action Send Email, Send to FTP, Save to SD Card, Relay Out
Remote PTZ Control Yes, via RS-485
Security Password protection
Firmware Upgrade HTTP mode, can be upgraded remotely
Connection Up to 5 clients/ 20 channels simultaneously
Audio Yes, 2-way
SD Card Management
Recording Trigger Motion Detection, Sensor In, IP Check
Video Format AVI (without audio)
Video Playback Yes
File Management Yes, can be deleted or overwrite
Web Browsing Requirement
Operating System Windows 2000, XP, 2003, IE 6 or above
Suggested Hardware Intel-C 2.0G, RAM: 512MB, Graphic card: 64MB
* Specifications are subject to change without notice
4
3. Product Installation
A. Hardware Installation
Cable Connections
Network Connector: The RJ-45 connector allows connect the Ethernet cable.
Power Jack:
To connect the included power adapter.
Video Out: The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
Video In: The BNC connector allows connect to the video signal of an
analog camera.
Audio Out: The RCAconnector allows connect to an amplified speaker,
you can hear the voice of the remote site from the speaker.
Audio In: The RCAconnector allows connect to a microphone or audio
source, the voice will be transferred to the remote site via
network.
I/O Connector:
The terminal blocks allow connect to a PTZ device, and I/O.
Antenna Connector: Available for Wireless model. To connect the included wireless
antenna.
5
SD Card Slot: Insert a SD card if you want to do the event recording in the
video server.
1. Connect the video and audio outputs of analog camera to the video server. If the
analog camera is a PTZ device, connect the RS-485 for the remote PTZ control.
2. Connect the cables of Digital I/O, Video output andAudio output if you want to use
these functionalities.
3. Connect the wireless antenna for Wireless model.
4. Connect Ethernet cable for network connection.
5. Connect power adapter to turn on the video server.
6. Set up the network configurations according to the network environment. For further
explanation, please refer to Network Configuration chapter.
7. After finish the configuration for the very first time, if you want to use wireless network,
plug out the Ethernet cable.
I/O Connections
I/O terminal connector – used in application, for e.g., motion detection, event triggering,
alarm notifications. It provides the interface to:
4 sets of Digital Input (Alarm In + GND) – The digital inputs for connecting devices
that can toggle between an open and closed circuit, such as PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the status changes
and the input becomes active.
4 sets of Relay Output (N.O. + COM or N.C. + COM) –The output to Relay switch
of the alarm device such as LEDs, Sirens, etc.
6
Digital Input (Alarm Input)
GND (Ground): Initial status is LOW.
Alarm: Max. 50mA, 12VDC.
Relay output
COM: Common pin.
N.O. (Normally Open): Max. 1A/ 24VDC or 0.5A / 125VAC.
N.C. (Normally Close): Max. 1A / 24VDC or 0.5A / 125VAC.
Door/Window
Contacts
Alarm In
Relay Out
7
8
B. Monitor Setting
1. Right-Click on the desktop. Select [Properties]
2. Change color quality to “Highest (32bit)”.
9
C. IP Assignment
Always consult your network administrator before assigning an IP address to your
video server in order to avoid using a previously assigned IP address.
MAC Address: Each network video server has a unique Ethernet address (MAC
address) shown on the sticker of the device.
One final note, although the IP Search is able to find and configure any network
device on the LAN except those that are behind a router, it is a good idea to set the
host PC to the same subnet. In order to connect to the Web-based user interface of
the network video server, the host PC must be in the same subnet. For more
information about subnets, please consult your network administrator.
There are 3 kinds of IP configuration:
Fixed IP (Public IP or Virtual IP)
DHCP (Dynamic IP)
Dial-up (PPPoE)
IP Search is a utility that provides an easier, more efficient way to configure the IP
address and network settings of the network camera in Local Network (LAN). It even
provides a convenient way to set the network settings for multiple devices simultaneously.
Moreover, IP Search can save the network settings for all devices as a backup and
restore them when necessary.
The software can be installed from the attached software CD.
1. Once IP Search has been successfully installed on the computer, double click the
“IP Search” icon on the desktop.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Asoni Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
