
6
TOUCH! WIRELESS RGB LED CONTROLLER INSTALLATION GUIDE
Have questions? Call 888-503-1317www.aspectled.com | Copyright © 2020 ASP Holdings, Inc.
Remote operation
Troubleshooting
Shift in brightness
and/or temperature
• Make sure you did not exceed the maximum wattage of the controller or the max series run
limit for your xture. This will cause excess voltage drop, resulting in decreased brightness
and/or temperature as the run is extended.
Some lights are
not functional • Ensure all connections have been attached properly.
Lights are ickering • Check that a compatible power supply/driver is installed.
• Check for loose connections and that components are attached correctly.
Lights are turning
on/o repeatedly
• Ensure the driver is not overloaded. An overloaded driver will trip the internal auto-reset
repeatedly, turning the system on/o.
Installation trips
main breaker • Check wiring for a short circuit or other wiring issue.
Choose a single color by
using the color wheel.
Slide your nger anywhere
on the color wheel to
choose a specic color.
Brightness/Speed control
buttons.Press the large
star to increase brightness
or speed. Press the small
star button to decrease
brightness or speed.
SCENES
• Solid White – brightness adjustable
• Solid Cyan –brightness adjustable
• Solid Magenta –brightness adjustable
• Solid Yellow –brightness adjustable
• Solid Blue –brightness adjustable
• Solid Green –brightness adjustable
• Solid Red –brightness adjustable
• Blue + Red Strobe Flash –speed adjustable
• Blue Strobe Flash – speed adjustable
• Green Strobe Flash – speed adjustable
• Red Strobe Flash – speed adjustable
• 7 Color Fade – speed adjustable
(color fades out before new color comes in)
• 7 Color Smooth Gradient –speed adjustable
(smooth transition between colors)
• Red, Green, Blue Fade – speed adjustable
(color fades out before new color comes in)
• 7 Color Strobe Flash – speed adjustable
• Red, Green, Blue Strobe Flash –speed adjustable
to power on and o
to play and pause
Previous Next