4.2 Advantages
Wireless design --- The AL7s are easy for installation due to its integrated battery
and RF receiver.
Smart programing --- The AL7s not only display complex color-changing programs
but also gives you the possibility to use your own customized colors for these pro-
grams when controlled by an ARC2 Remote Control. The AL7s can be used as stan-
dalone unit or grouped and paired with other Astera lamps and be controlled with an
ARC2 RF Remote Control.
Energy saving design --- Low working voltage low power consumption and addi-
tional white LEDs helps to save up to 80% energy so it can reach a maximum opera-
tion time of up to 24 hours.
4.3 Button and Operation
To power on the unit hold the on/off button for 2-3 second.
To power off hold the button again for 1 second until the light turns off.
To choose basic colors or a rainbow effect turn the unit on then hold down the button and
keep the finger until the lamp turns into the blue blinking mode. Push the button several
times to cycle through the basic colors until the rainbow effect. When the desired color is
displayed hold the button until the LEDs stop blinking and the lamp turns into normal oper-
ation.
To do a Factory Reset turn the unit on. Then hold down the button and keep the finger
until: unit turns off turns on blue blinking turns off again→ →
When the unit turns off for the second time a factory reset was done.
While powered up the indicator LED will show the battery charge state:
red – orange – green corresponding to the charge state
While charging the LED will blink in green.
10
