Asus WL 167G Manuale utente

English

Quick Start Guide

QE1684

54Mbps

USB Wireless LAN Adapter

(WL-167g)

2ASUS USB Wireless LAN Adapter

English

System requirements

Before installing the ASUS USB Wireless LAN Adapter, make sure that your

system meets the following requirements:

• Intel

Pentium

4 or AMD K7/K8 system

• Minimum 64MB system memory

• Windows

98SE*/ME/2000/XP operating system

• Optical drive (for software installation)

• An available USB port (USB 2.0 recommended because USB 1.1 cannot

achieve maximum wireless performance)

Installation procedures

Follow these instructions to install the ASUS USB Wireless LAN Adapter in

your computer.

1. Install the device drivers and utilities from the support CD.

2. Connect the device to your computer.

NOTE: You must install the ASUS USB Wireless LAN Adapter drivers and

utilities before connecting the device to your computer.

Installing the device drivers and utilities

To install the device driver and

utilities in your computer:

1. Insert the support CD to the

optical drive.

2. Click “Install ASUS WLAN

Card Utilities/Driver” when

the ASUS Wireless LAN

Card installation window

appears.

3. The device drivers and

utilities are copied into your computer.

NOTE: If Autorun is NOT enabled in your computer, browse the contents of

the support CD and double click the Setup.exe file to run the CD.

ASUS USB Wireless LAN Adapter 3

English

Installation procedures (Cont.)

Installing the device

To install the ASUS USB Wireless

LAN Adapter in your computer:

1. Insert to any USB port.

2. When “Found New Hardware”

dialog box appears, select

“Install...automatically” and

follow the instructions.

Windows

2000 users - A Digital Signature Not Found dialog box may

appear. Click Yes to proceed.

Windows

XP users - A Windows Logo Testing Not Found dialog box may

appear. Click Continue Anyway to proceed.

3. After completing installation, configure the ASUS USB Wireless LAN

Adapter using ASUS Wireless Settings.

Support Software

Control Center

The Control Center utility is a

management software that launches

applications and configures network settings. The Control Center starts

automatically when the system boots and displays the Control Center icon in

the Windows

taskbar. The Control Center icon serves as an application

launcher, and indicator of signal quality and Internet connection.

Control Center right-click menu

Right-clicking the Control Center icon

displays the right-click menu. The following

sections describe the right-click menu

utilities.

4ASUS USB Wireless LAN Adapter

English

Support Software (Cont.)

Wireless Settings

The Wireless Settings is the main

interface that allows you to control

the ASUS USB Wireless LAN

Adapter. You may use the Wireless

Settings to view the operational

and connection status, or to modify

the device configuration.

The Wireless Settings window is

composed of the property window

and tabbed property sheets. Click

an icon in the property window to

display its tabbed property sheets.

About

Click the About icon to view the

software version, driver version,

and copyright information.

Link State

Displays the current connection

status of the wireless LAN adapter

to the AP or to other Wi-Fi devices.

An icons represents the Link State

for easy identification. Refer to the

table below for icon indications.

Table of Icon Indications

Property window

Tabbed property sheets

Excellent link quality (Infrastructure) Not linked (Infrastructure)

Good link quality (Infrastructure) Linked (Ad-hoc)

Fair link quality (Infrastructure) Not linked (Ad-hoc)

Poor link quality (Infrastructure) Scanning

ASUS USB Wireless LAN Adapter 5

English

Support Software (Cont.)

Mobile Manager

The Mobile Manager is a convenient tool to setup and manage network

location settings. This utility allows users to configure multiple alternative

configurations for different locations.

Launch the Mobile Manager utility by:

• Clicking the Windows

Start button. Select Programs > ASUS Utility >

WLAN Card > Mobile Manager, or

• Right-clicking the Control Center icon on the Windows

taskbar, then

select Mobile Manager.

6ASUS USB Wireless LAN Adapter

English

Support Software (Cont.)

Site Monitor

The Site Monitor utility measures the signal-to-noise (SNR) values of all

available wireless networks. Use this utility to determine the best location for

the ASUS USB Wireless LANAdapter .

To launch the site monitor:

• Click the Windows

Start button, then select Programs > ASUS Utility >

WLAN Card > Site Monitor, or

• Right-click the Control Center icon on the Windows taskbar, then select

Site Monitor.

ASUS USB Wireless LAN Adapter 7

English

Support Software (Cont.)

TroubleShooter

The TroubleShooter utility provides a flowchart on how to connect the ASUS

USB Wireless LAN Adapter to a wireless network.

Control Center left-click menu

Left-clicking the Control Center icon

displays the left-click menu. The

options are described below.

Search & Connect – Displays available wireless networks within range.

Wireless Option – Sets your

Windows

XP wireless networking

environment. The Wireless Option

window appears when you select

this option. Select “Only use

ASUS utilities and disable XP

wireless function” to avail all

ASUS USB Wireless LAN adapter

features. Click OK.

8ASUS USB Wireless LAN Adapter

English

Wireless Connections

Connecting to Access Points (Infrastructure mode)

The ASUS USB Wireless LANAdapter is set to Infrastructure mode by

default. In an Infrastructure network, the device connects to an access point

(AP) that serves as the link to other wireless device(s) or to a wired network.

To connect the ASUS USB Wireless LAN Adapter to an access point.

1. Launch the Wireless Settings utility by double-clicking the Control Center

icon in the Windows

taskbar.

2. Click The Survey button to scan

available APs within the ASUS

USB Wireless LAN Adapter

range. Select the AP you wish to

connect.

3. Click the Config button to

configure the device settings. Set

the Network type to

Infrastructure, then enter the

Network Name (SSID) and

Channel of the AP you wish to

connect. Click Apply when done.

4. Click the Encryption tab if your

selected AP has an enabled

encryption ( ).

Obtain the encryption keys from

the network administrator, then

enter them in the Key fields. Click

Apply when finish.

IMPORTANT! The encryption

settings of the device and the AP

must be identical to establish

connection.

ASUS USB Wireless LAN Adapter 9

English

Connecting to another wireless device (Ad-hoc mode)

The ASUS USB Wireless LAN Adapter when set to Ad-hoc mode connects

to other wireless device(s) in a wireless network.

To connect the ASUS USB Wireless LAN Adapter to another wireless device:

1. Launch the Wireless Settings utility by double-clicking the Control Center

icon in the Windows

taskbar.

5. Click the Status button to verify

if the device is connected to the

AP. If connection is established,

the Association State field

shows “Connected -

XX:XX:XX:XX:XX:XX”.

6. Click the Connection tab to

display the connection strength

and link quality of the device to

the AP.

2. Click the Survey button to scan

available wireless device(s)

within the ASUS USB Wireless

LAN Adapter range. Select the

the wireless device you wish to

connect. Awireless device is

indicated by this icon ( ).

Wireless Connections (Cont.)

10 ASUS USB Wireless LAN Adapter

English

3. Click the Config button to

configure the device settings. Set

the Network type to Ad hoc,

then enter the Network Name

(SSID) and Channel of wireless

device you wish to connect. Click

Apply when done.

4. Click the Encryption tab if your

selected wireless device has an

enabled encryption ( ).

Obtain the encryption keys from

the network administrator, then

enter them in the Key fields.

Click Apply when finish.

5. Click the Status button to verify

if the ASUS USB Wireless LAN

Adapter is connected to the

device. If connection is

established, the Association

State field shows “Connected -

XX:XX:XX:XX:XX:XX”.

6. Click the Connection tab to

display the connection strength

and link quality between the

ASUS USB Wireless LAN

Adapter and the wireless device.

IMPORTANT! The encryption settings of the ASUS USB Wireless LAN

Adapter and the wireless device must be identical to establish connection.

Wireless Connections (Cont.)

Altri manuali per WL 167G

Indice

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente