Asus Tinker System 2 Series Manuale utente
Tinker System 2
Series
User Manual
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by
any means, except documentation kept by the purchaser for backup purposes, without the express
written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL“AS IS”WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,
LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR
PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to
the owners’benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR
LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to
recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled
to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including
death) and damage to real property and tangible personal property; or any other actual and direct
damages resulted from omission or failure of performing legal duties under this Warranty Statement,
up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort
or infringement under this Warranty Statement.
This limit also applies to ASUS’suppliers and its reseller. It is the maximum for which ASUS, its
suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY
CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO,YOUR RECORDS OR DATA; OR (3)
SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES
(INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS
INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language web site at https://www.asus.com/support/
Revised Edition
June 2023
E22240
ASUS Tinker System 2 Series
3
Contents
About this manual.................................................................................................................4
Conventions used in this manual....................................................................................4
Product Overview..................................................................................................................5
Tinker System 2 Series specications summary.........................................................5
Package contents ..................................................................................................................6
Getting to know your Tinker System 2
Features.....................................................................................................................................8
Front view ................................................................................................................................8
Left view...................................................................................................................................10
Rear view..................................................................................................................................11
Single Board Computer Overview...................................................................................12
Single Board Computer (SBC) layout.............................................................................12
Using your Tinker System 2
Getting started .......................................................................................................................22
Install the operating system..............................................................................................22
Connect a display to your Tinker System 2..................................................................24
Connect keyboard and mouse.........................................................................................26
Connect an AC power adapter.........................................................................................27
Appendix
Safety information.................................................................................................................30
Setting up your system.......................................................................................................31
Care during use......................................................................................................................31
Restricted Access Location................................................................................................32
Safety Precautions ................................................................................................................32
Regulatory notices ................................................................................................................33
Service and Support.............................................................................................................40
4
ASUS Tinker System 2 Series
About this manual
This manual provides information about the hardware and software features
of your Tinker System 2, organized through the following chapters:
Chapter 1: Getting to know your Tinker System 2
This chapter details the hardware components of your Tinker System 2.
Chapter 2: Using your Tinker System 2
This chapter provides you with information on using your Tinker
System 2.
Appendix
This section includes notices and safety statements for your Tinker
System 2.
Conventions used in this manual
To highlight key information in this manual, some text are presented as
follows:
IMPORTANT! This message contains vital information that must be
followed to complete a task.
NOTE: This message contains additional information and tips that
can help complete tasks.
WARNING! This message contains important information that must
be followed to keep you safe while performing certain tasks and
prevent damage to your Tinker System 2's data and components.
ASUS Tinker System 2 Series
5
Product Overview
Tinker System 2 Series is more than a dream for the DIY-obsessed: it’s a
gateway to new ideas and new relationships. Experienced makers will love
Tinker Board’s performance-to-price ratio and strong brand heritage, while
novices and younger users will appreciate its accessibility and ease of use.
But all will come together to create — Together We Make!
Tinker System 2 Series specications summary
SoC Rockchip RK3399 (64-bit)
CPU Dual-core Arm® Cortex®-A72 @ 2.0 GHz
Quad-core Arm® Cortex®-A53 @ 1.5 GHz
GPU Arm® Mali™-T860 MP4 GPU @ 800 MHz
Display
1 x HDMI™ with CEC hardware ready
1 x USB Type-C® (DP 1.2)
1 x 22-pin MIPI DSI (4 lane) supports up to FHD
Memory Size Dual-CH LPDDR4 2GB or 4GB
Storage 16/32GB eMMC
Connectivity RTL8211F-CG GbE LAN
M.2 - 802.11 a/b/g/n/ac wireless & BT 5.0 (2T2R)
Audio
1 x HDMI™ audio output
1 x S/PDIF TX pin (from GPIO)
1 x PCM/I2S pins (from GPIO)
USB 3 x USB 3.2 Gen 1 Type-A ports
1 x USB 3.2 Gen 1 Type-C® OTG port
Camera Interface 1 x 15-pin MIPI CSI-2 (2 lane)
Internal Headers
1 x 2-pin Recovery header
1 x 2-pin Power-on header
1 x 2-pin Reset header
1 x 2-pin Debug UART header
1 x 2-pin DC Fan header
1 x 2-pin RTC Battery header
Power Connector
(up to 45W) 1 x 12~19.5 V DC Power Input Jack (5.5/2.5 mm)
OS Support Debian 10 / Android 11
Dimension 3.58” x 2.64” x 1.77”(91 mm x 67 mm x 45 mm)
6
ASUS Tinker System 2 Series
Package contents
Your Tinker System 2 package contains the following items:
ASUS Tinker System 2 Series
2 x Wi-Fi/BT antennas Technical documentation
NOTES:
• Some bundled accessories may vary depending on the model. For
details on these accessories, refer to their respective user manuals.
• The device illustration is for reference only. Actual product
specifications may vary depending on the model.
• If the device or its components fail or malfunction during normal
and proper use within the warranty period, bring the warranty
card to the ASUS Service Center for replacement of the defective
components.
1
Getting to know your Tinker
System 2
8
ASUS Tinker System 2 Series
Features
Front view
MIPI DSI (4 lane) slot
This slot allows you to connect a MIPI display module via a 4 lane
MIPI-DSI cable for up to 6Gbps connection speed.
LAN port
The 8-pin RJ-45 LAN port supports a standard Ethernet cable for
10/100/1000Mbps connection to a local network.
ACT/LINK LED SPEED LED
LAN port
Activity Link LED
Status Description
Off No link
Yellow Linked
Yellow (blinking) Data activity
Yellow (blinking
then steady)
Ready to wake
up from suspend
mode
Speed LED
Status Description
Off 10 Mbps connection
Orange 100 Mbps connection
Green 1 Gbps connection
ASUS Tinker System 2 Series
9
USB 3.2 Gen 1 Type-C® On-The-Go (OTG) port
This USB 3.2 Gen 1 Type-C® OTG port provides the following:
• Transfer rate of up to 5 Gbit/s for USB 3.2 Gen 1 devices.
• Support for Power Delivery with a maximum of 5V/1.5A
output.
• Backward compatible to USB 2.0.
• Support for OTG mode that allows this device to read data
from a USB device even when it’s not connected to a PC.
• Support for DP 1.2 with a resolution of up to 4096 x 2160
@60Hz.
USB 3.2 Gen 1 port
The USB 3.2 Gen 1 (Universal Serial Bus) port provides a transfer
rate up to 5 Gbit/s.
10
ASUS Tinker System 2 Series
Power input jack
This 5.5/2.5mm DC-in jack supplies power to Tinker System 2.
To prevent damage to the device, use only UL certified power
adapters that meet the following specifications:
Power adapter: +12~19.5V DC 3.75~2.31A, 45W
WARNING! The power adapter may become warm to hot
when in use. Do not cover the adapter and make sure to
keep it away from your body.
HDMITM port
The HDMI™ (High Definition Multimedia Interface) port supports
a Full-HD device, such as an LCD TV or monitor, to allow viewing
on a larger external display.
NOTE: When using only this port as a display output
source, this port will support a resolution of up to 4096 x
2160 @60Hz. The resolution may also be affected by the
cabling and output device.
Left view
Indice
Altri manuali Asus Scrivania
Asus
Asus Essentio CM1831 Manuale utente
Asus
Asus V6-P5G41E Manuale utente
Asus
Asus BM1AD1 Manuale utente
Asus
Asus A500 Manuale utente
Asus
Asus ET2011AUKB Manuale utente
Asus
Asus BM6875 Manuale utente
Asus
Asus BP5120 Manuale utente
Asus
Asus P5V900 Manuale utente
Asus
Asus D320SF Manuale utente
Asus
Asus EB1501P-B016E Manuale utente
Asus
Asus BM6AF Manuale utente
Asus
Asus Pundit P3-PH4 Manuale utente
Asus
Asus AS-D777 Manuale utente
Asus
Asus Zen AiO ZN22 Series Manuale utente
Asus
Asus T4 Series Manuale utente
Asus
Asus Terminator 2 Barebone System T2-P Manuale utente
Asus
Asus A31AM-J Manuale utente
Asus
Asus ASUSTEK ROG Strix G15DK Manuale utente
Asus
Asus Zen AiO Pro Z220IC Manuale utente
Asus
Asus Pundit P3-PE5 Manuale utente
