Asus DSL-N12U Manuale utente

DSL-N12U

11N 300Mbps Wireless ADSL Modem Router

User Guide

No part of this manual, including the products and software described

in it, may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language in any form or by any means, except

documentation kept by the purchaser for backup purposes, without the express

written permission of ASUSTeK Computer Inc. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired,

modiﬁed or altered, unless such repair, modiﬁcation of alteration is authorized

in writing by ASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL“AS IS”WITHOUT WARRANTY OF ANY KIND,

EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED

WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS,

EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,

OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS

AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR

PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE

FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE

AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A

COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY

FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be

registered trademarks or copyrights of their respective companies, and are used

only for identiﬁcation or explanation and to the owners’ beneﬁt, without intent

to infringe.

E7218

Second Edition

February 2012

Table of contents

1 A quick look

Package contents ........................................................................................ 5

Your ADSL router ......................................................................................... 5

Mounting options ....................................................................................... 7

2 Creating your network

Positioning your router ............................................................................. 8

What you need ............................................................................................. 9

Connecting your devices........................................................................10

Wired connection...............................................................................10

Before you proceed...................................................................................11

Disable the proxy server, if enabled.............................................11

Set the TCP/IP settings to automatically obtain

an IP address...............................................................................13

Disable the dial-up connection, if enabled................................14

Setting up your ADSL router..........................................................15

3 ConguringviathewebGUI

Logging into the web GUI......................................................................18

Using Wi-Fi Protected Setup (WPS).....................................................20

Using the Network Map ..........................................................................22

Creating multiple SSID proﬁles .....................................................23

Managing bandwidth with EzQoS ......................................................24

Upgrading the ﬁrmware .........................................................................25

Restoring/Saving/Uploading settings................................................26

4 Usingtheutilities

Installing the utilities................................................................................27

To install the utilities: ...............................................................................27

Device Discovery .......................................................................................29

Table of contents

Firmware Restoration...............................................................................30

ADSL Setting Wizard.................................................................................31

Setting up your network printer ..........................................................38

5 Troubleshooting

Troubleshooting ........................................................................................42

ASUS DDNS Service ..................................................................................45

Frequently Asked Questions (FAQs) ............................................45

Appendices

Notices...........................................................................................................47

ASUS Contact information .....................................................................57

Networks Global Hotline Information................................................58

1 A quick look

Package contents

Your ADSL router

NOTES:

• If any of the items is damaged or missing, contact ASUS for

technical inquiries and support. Refer to the ASUS Support

Hotline list at the back of this user manual.

• Keep the original packaging material in case you would need

future warranty services such as repair or replacement.

Reset Power

On/Off USB LAN4 LAN3 LAN2 LAN1 WPS On Off

ADSL

11 12 13

DSL-N12U RJ-11 cable

Power adapter Quick Start Guide

Support CD (User Manual/utilities) Warranty card

RJ-45 cable

1Power LED

Off: No power.

On: Device is ready.

Flashing slow: Rescue mode

Flashing quick: WPS is processing.

2ADSL LED

Solid light: ADSL link is established.

Flashing: No ADSL link or unable to establish ADSL link.

3WAN LED

Off: No power or no physical connection.

On: Has physical connection to a wide area network (WAN).

4LAN LED

Off: No power or no physical connection.

On: Has physical connection to a local area network (LAN).

5Wi-Fi LED

Off: No Wi-Fi signal.

On: Wireless system is ready.

Flashing: Transmitting or receiving data via wireless connection.

6Reset button

This button resets or restores the system to its factory default settings.

7Power (DC-In) port

Insert the bundled AC adapter into this port and connect your router to a

power source.

8Power switch

Press this button to turn the power on/off.

9USB 2.0 / USB 1.1 port

Insert a USB 2.0/USB 1.1 device such as USB hard disks or USB ﬂash drives into

this port.

Insert your iPad’s USB cable into this port to charge your iPad.

Insert your printer’s USB cable into one of these ports to set up your network

printer. For details, refer to the section Setting up your network printer.

10 LAN 1 ~ 4 ports

Connect network cables into these ports to establish LAN connection.

11 WPS button

This button launches the WPS Push Button Conﬁguration process.

12 Wi-Fi switch

Switch to turn the WiFi feature on/off.

13 ADSL port

Connect to a splitter or to a telephone outlet via an RJ-11 cable.

NOTES:

• Use only the adapter that came with your package. Using

other adapters may damage the device.

• Speciﬁcations:

DC Power adapter DC Input: +19V with max 1.58A current

Operating

Temperature

0~40oCStorage 0~70oC

Operating Humidity 50~90% Storage 20~90%

Mounting options

Out of the box, the ASUS ADSL router is designed to sit on a raised

ﬂat surface like a ﬁle cabinet or book shelf.The unit may also be

converted for mounting to a wall or ceiling.

To mount the ASUS ADSL router:

1. Look on the underside for

the two mounting hooks.

2. Mark two upper holes in a

ﬂat surface.

3.Tighten two ST3.5*40

screws until only 1/4’’ is

showing.

4. Latch the hooks of your

ADSL router onto the

ST3.5*40 screws.

NOTE: Re-adjust the ST3.5*40 screws if you cannot latch DSL-

N12U onto the ST3.5*40 screws or if it is too loose.

2 Creating your network

Positioning your router

For the best wireless signal transmission between the ADSL router

and the network devices connected to it, ensure that you:

• Place the ADSL router in a centralized area for a maximum

wireless coverage for the network devices.

• Keep the device away from metal obstructions and away from

direct sunlight.

• Keep the device away from 802.11g or 20MHz only Wi-Fi

devices, 2.4GHz computer peripherals, Bluetooth devices,

cordless phones, transformers, heavy-duty motors, ﬂuorescent

lights, microwave ovens, refrigerators, and other industrial

equipment to prevent signal interference or loss.

• Always update to the latest ﬁrmware.Visit the ASUS website at

http://www.asus.com to get the latest ﬁrmware updates.

• To ensure the best wireless signal, orient the two antennas as

shown in the drawing below.

450

What you need

To set up your network, you need one or two computers that meet

the following system requirements:

• Ethernet RJ-45 (LAN) port (10Base-T/100Base-TX)

• IEEE 802.11b/g/n wireless capability

• An installed TCP/IP service

• Web browser such as Internet Explorer, Firefox, Safari, or Google

Chrome

NOTES:

• If your computer does not have built-in wireless capabilities,

you may install an IEEE 802.11b/g/n WLAN adapter to your

computer to connect to the network.

• The Ethernet RJ-45 cables that will be used to connect the

network devices should not exceed 100 meters.

Connecting your devices

Wired connection

IMPORTANT!

• Use wired connection in setting up your ADSL router to avoid

possible setup problems due to wireless uncertainty.

• Before setting up your DSL-N12U, do the following:

• Disconnect the cables/wires from your existing modem

setup. If your modem has a backup battery, remove it as

well.

• Reboot your computer (recommended).

Reset Power

On/Off USB LAN4 LAN3 LAN2 LAN1 WPS On Off

ADSL

ASUS Wireless ADSL Router

Wall power outlet

Network

cable

Phone

Line

Wall telephone

outlet

Phone

Line

Phone

Line

To set up your ADSL router via wired connection:

1. Insert the splitter’s line connector to the phone outlet and

connect your phone into the phone port.

2. Using the bundled phone cable, connect your DSL-N12U’s

ADSL port to the splitter’s DSL port.

3. Using the bundled network cable, connect your computer to

the ADSL router’s LAN port.

Altri manuali per DSL-N12U

Indice

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente