Asus MB14AHD Manuale utente
MB14AHD
Portable USB Touch
Monitor
User Guide
ii
Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of ASUSTeK COMPUTER INC.
(“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or
altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)
the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE
OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED
FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME
WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY
ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS
AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identification or
explanation and to the owners’ benefit, without intent to infringe.
Table of contents
Notices......................................................................................................... iii
Safety information ....................................................................................... v
Care & cleaning........................................................................................... vi
Takeback services..................................................................................... vii
1.1 Welcome! ...................................................................................... 1-1
1.2 Package contents......................................................................... 1-1
1.3 Monitor introduction .................................................................... 1-2
1.3.1 Front view ....................................................................... 1-2
1.3.2 QuickFit Function ............................................................ 1-3
2.1 Adjusting the monitor.................................................................. 2-1
2.2 Connect the USB monitor with system...................................... 2-2
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure.......................................................... 3-1
3.1.2 OSD Function Introduction.............................................. 3-2
3.2 DisplayWidget Lite..................................................................... 3-10
3.3 Touch Panel Setting .................................................................. 3-11
3.4 Specications............................................................................. 3-12
3.5 Troubleshooting (FAQ).............................................................. 3-13
3.6 Supported Timing List............................................................... 3-15
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This product qualifies for ENERGY STAR in the factory
default settings which can be restored by “Factory Reset”
function in the OSD menu.
Changing the factory default settings or enabling other
features may increase power consumption that could exceed
the ENERGY STAR specified limit.
iv
Declaration of Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with
the harmonized standards for Information Technology Equipment, these
harmonized standards published under Directives of Official Journal of the
European Union.
WEEE Symbol Statement
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over
to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources
and ensure that it is recycled in a manner that protects human health and
the environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where you purchased the
product.
v
Safety information
• Before setting up this Portable USB Monitor, carefully read all the
documentation that came with the package.
• To prevent fire or shock hazard, never expose this Portable USB
Monitor to rain or moisture.
• Never try to open this Portable USB Monitor cabinet.
• Before using this Portable USB Monitor, make sure all cables are
correctly connected and the power cables are not damaged. If you
detect any damage, contact your dealer immediately.
• Avoid dust, humidity, and temperature extremes. Do not place this
Portable USB Monitor in any area where it may become wet. Place this
Portable USB Monitor on a stable surface.
• Never push objects or spill liquid of any kind into the slots on this
Portable USB Monitor cabinet.
• If you encounter technical problems with this Portable USB Monitor,
contact a qualified service technician or your retailer.
• This Portable USB Monitor is powered by USB port which complies
with LPS and SELV circuit according to IEC60950-1:2005.
Caution:
• Replacement of a battery with an incorrect type that can defeat a
safeguard;
• Disposal of a battery into fire or a hot oven, or mechanically crushing
or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
WARNING
Restriction on Hazardous Substances statement (India) This product
complies with the “India E-Waste (Management) Rules, 2016” and
prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated
biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in
concentration exceeding 0.1% by weight in homogenous materials
and 0.01% by weight in homogenous materials for cadmium, except of
exemptions listed in Schedule 2 of the Rule.
vi
Care & cleaning
• Cleaning. Turn your monitor off and unplug the cable. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore,
contact your dealer or service center to fix it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components
when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a
task.
NOTE: Tips and additional information to aid in completing a task.
Wheretondmoreinformation
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may
have been added by your dealer. These documents are not part of
the standard package.
vii
Takeback services
ASUS recycling and takeback programs come from our commitment to the
highest standards for protecting our environment. We believe in providing
solutions for our customers to be able to responsibly recycle our products,
batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail
recycling information in different region.
Product information for EU energy label
1-1
ASUS USB Type-C Monitor MB14AHD
1.1 Welcome!
Thank you for purchasing the ASUS Portable USB Touch Monitor!
The latest ASUS Portable USB Touch Monitor provides great portability
and productivity to your daily life, enhancing both of your viewing and
working experience.
1.2 Package contents
Check your package for the following items:
Portable USB Monitor
Quick Start Guide
Warranty Card
USB Type-C Cable
USB Type-C to A adapter (Optional)
USB Type-C to A cable (Optional)
Protective Sleeve
ASUS Stylus Pen
Micro HDMI to HDMI cable
QC3.0 18W Adapter
• If any of the above items is damaged or missing, contact your retailer
immediately.
1-2 Chapter 1: Product Introduction
1.3 Monitor introduction
1.3.1 Front view
1
2
3
4
Power
Menu
Close
Input Select
Power
Menu
Close
Input Select
1. Power
button/Power LED
• Press this button to turn the monitor on/off.
• The color definition of the power indicator is as the below table.
Status Description
Blue ON
Amber Standby mode
Dark OFF
2. Menu button
• Press this button to enter the OSD menu.
3. Close / Up Button:
• Exit the OSD menu
.
4. Input Select & Shortcut Button
• Default setting for this button is “Input Select”, it can be used to switch
input source.
• “Input Select” can be replaced with other frequent used function, go to
“Shortcut” and select your favorite function.
• Key Lock shortcut key. Press and hold it for 5 seconds to enable/disable
Keys Lock.
1-3
ASUS USB Type-C Monitor MB14AHD
1.3.2 QuickFit Function
The QuickFit function contains two patterns: (1) Grid (2) Photo size.
1. Grid pattern: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel.
Alignment grid 1 will be rotated automatically if auto rotation is
enabled.
Alignment Grid1
Alignment Grid1
Alignment Grid1
Alignment Grid1
Alignment Grid2
2. Photo size: Provides photographers and other users to accurately
view and edit their photos in real size on the screen.
3x5
4x6
Indice
Altri manuali Asus Monitor
Asus
Asus VK221D Guida di riferimento
Asus
Asus VA24DQLB-W Manuale utente
Asus
Asus VB171D - 17" LCD Monitor Manuale utente
Asus
Asus VW223B Manuale utente
Asus
Asus VA229Q Series Manuale utente
Asus
Asus VK228H-CSM Manuale utente
Asus
Asus TUF Gaming VG24V Series Manuale utente
Asus
Asus VG278HR Series Manuale utente
Asus
Asus SV425 Manuale utente
Asus
Asus VS197 Series Manuale utente
Asus
Asus VW246 Manuale utente
Asus
Asus MZ279HL Series Manuale utente
Asus
Asus VB191T Manuale utente
Asus
Asus VH226C Manuale utente
Asus
Asus VS247H-P Manuale utente
Asus
Asus VW192T - 19" LCD Monitor Manuale utente
Asus
Asus VN289QR Manuale utente
Asus
Asus VG259QM Series Manuale utente
Asus
Asus VT168N Series Manuale utente
Asus
Asus VZ279HE Manuale utente
