Asus PW191 Series Manuale utente

English

PW191

LCD Monitor

Quick Start Guide

2Quick Start GuideQuick Start Guide

Quick Start GuideQuick Start Guide

Quick Start Guide

English

Safety information

• Before setting up the monitor, carefully read all the documentation that

came with the package.

• To prevent fire or shock hazard, never expose the monitor to rain or

moisture.

• The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power supplied

to your home, consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power

standard.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate configured receptacles marked

between 100-240V AC.

• If you encounter technical problems with the monitor, contact a qualified

service technician or your retailer.

Monitor introduction

Front viewFront view

Front view Rear viewRear view

Rear viewRear view

Rear view

1. MENU sensor

2. Decrease sensor/Volume hotkey

3. Increase sensor/Brightness hotkey

4. SPLENDID™ mode hotkey

5. Power sensor/indicator

344

455

122

21010

1010

Stand

Stereo

speaker

6. DC-in port

7. DVI port

8. VGA port

9. Audio-in port

10. Headphone port

Quick Start GuideQuick Start Guide

Quick Start Guide

English

Stand

The monitor is folded in the

package. To unfold the

monitor, hold the stand

with one hand and carefully

tilt the monitor forward

with the other hand.

Unfolding the monitor

To connect the cables:

1. Adjust the monitor

to your desired

height and tilt.

2. Turn the monitor

90º counterclockwise

so you can clearly see

the ports at the

bottom of the rear

panel.

Connecting the cables

Front view Side view

3. Connect the cables as shown:

Power adapter

VGA cable

Audio cable

Input ports

4Quick Start GuideQuick Start Guide

Quick Start GuideQuick Start Guide

Quick Start Guide

English

4. Close the rear connector cover.

Align the cover to the three slots

near the ports and close the cover

carefully. A click indicates that the

cover has been closed successfully.

•To connect the audio cable:To connect the audio cable:

To connect the audio cable:To connect the audio cable:

To connect the audio cable: connect one end of the audio cable to

the monitor’s Audio-in port, and then connect the other end to the

computer multi-media (or audio) card’s audio output.

•To connect the power adapter:To connect the power adapter:

To connect the power adapter:To connect the power adapter:

To connect the power adapter: first, connect the adapter cord

securely to the monitor’s DC-in port. Then, connect the power plug to

the adapter port with the other end to a power outlet.

•To connect the VGA cable:To connect the VGA cable:

To connect the VGA cable:To connect the VGA cable:

To connect the VGA cable:

a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.

b. Connect the other end of the VGA/DVI cable to your computer’s

VGA/DVI port.

c. Tighten the two screws to secure the VGA/DVI connector.

Adjusting the monitor

-5º~25º

120º

90º

• You can adjust the monitor’s

from -5º to 25º.

• You can also turn the monitor

90º counterclockwise.

• The stand allows you to turn the

monitor left/right up to 120º.

Quick Start GuideQuick Start Guide

Quick Start Guide

English

Safeguards

Detaching the stand (for VESA wall mount)

To detach the stand:

1. Turn the VESA cover counterclockwise to open it.

2. Remove the VESA cover from the stand.

3. Use a screwdriver to remove the four screws on the stand of the

monitor.

CAUTION!CAUTION!

CAUTION! Have the front of the monitor face down to make the

detachment safer and easier. We recommend that you cover the surface

with soft cloth to prevent damage to the monitor.

Pivot

Pro Software

•Installation instructions:Installation instructions:

Installation instructions:Installation instructions:

Installation instructions:

1. Close all other applications first.

2. Make sure your graphics card manufacturer’s (native)

drivers are installed before you install the Pivot

Pro

software.

3. Insert the support CD into the optical drive and run the

START_PIVOT program.

• This software only supports Windows

98SE, ME, NT 4.0, 2000, and XP

operating systems.

• After the installation, you can set up hotkeys for different rotation

degrees by pressing the right mouse button -- enter Properties --

Settings -- Advanced -- Pivot Software -- Hotkeys.

• For more information or help, go to www.portrait.com.

6Quick Start GuideQuick Start Guide

Quick Start GuideQuick Start Guide

Quick Start Guide

English

Altri manuali per PW191 Series

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG M1950D-PZ Manuale utente