Asus ROG strix XG256Q Manuale utente

USER GUI D E

ROG

strix XG256Q

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS,

EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA,

INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL

USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE AND SHOULD NOT BE

CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR

ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND

SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

First Edition

January 2022

iii

Table of Contents

Notices ...............................................................iv

Safety information............................................v

Care & Cleaning ............................................. viii

1.1 Welcome!................................................ 1-1

1.2 Package Contents.............................. 1-1

1.3 Assembling the Monitor .................... 1-2

1.4 Connect Cables.................................... 1-5

1.4.1 Rear of the LCD Monitor ....................... 1-5

1.5 Monitor Introduction........................... 1-6

1.5.1 Using the Control Buttons .................... 1-6

1.5.2 GamePlus Function.................................. 1-8

1.5.3 GameVisual Function............................... 1-9

2.1 Detaching the Stand

(for VESA Wall Mount)...................... 2-1

2.2 Adjusting the Monitor ........................ 2-2

3.1 OSD (On-Screen Display) Menu..... 3-1

3.1.1 How to Reconfigure ................................. 3-1

3.1.2 OSD Function Introduction.................... 3-2

3.2 Specifications....................................3-10

3.3 Outline Dimensions...........................3-11

3.4 Troubleshooting (FAQ) ....................3-12

3.5 Supported Timing List.....................3-13

Notices

Federal Communications Commission

Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING: The use of shielded cables for connection of the monitor to

the graphics card is required to assure compliance with FCC regulations.

Changes or modications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to

operate this equipment.

Canadian Department of

Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian Interference

-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Réglement

sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that

came with the package.

• To prevent re or shock hazard, never expose the monitor to rain or

moisture.

• Never try to open the monitor cabinet. The dangerous high voltages

inside the monitor may result in serious physical injury.

• If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

• Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or

over a radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power supply

to your home, consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power

standard.

• Do not overload power strips and extension cords. Overloading can

result in re or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the

monitor in any area where it may become wet. Place the monitor on a

stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a

long period of time. This will protect the monitor from damage due to

power surges.

• Never push objects or spill liquid of any kind into the slots on the

monitor cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate congured receptacles marked

between 100 ~ 240V AC.

• The socket-outlet shall be installed near the equipment and shall be

easily accessible.

• If you encounter technical problems with the monitor, contact a qualied

servicer.

• Provide an earthing connection before the mains plug is connected to

the mains. And, when disconnecting the earthing connection, be sure

to disconnect after pulling out the mains plug from the mains.

• Please use ADP-40KD BB adapter.

• If provided with a 3-pin attachment plug on the power cord, plug the cord

into a grounded (earthed) 3-pin outlet. Do not disable the power cord

grounding pin, for example, by attaching a 2-pin adapter. The grounding

pin is an important safety feature.

Stability Hazard

• The product may fall, causing serious personal injury or death. To

prevent injury, this product must be securely attached to the oor/wall

in accordance with the installation instructions.

• A product may fall, causing serious personal injury or death. Many

injuries, particularly to children, can be avoided by taking simple

precautions such as:

• ALWAYS use cabinets or stands or installation methods recommended

by the manufacturer of the product set.

vii

• ALWAYS use furniture that can safely support the product.

• ALWAYS ensure the product is not overhanging the edge of the

supporting furniture.

• ALWAYS educate children about the dangers of climbing on furniture

to reach the product or its controls.

• ALWAYS route cords and cables connected to your product so they

cannot be tripped over, pulled or grabbed.

• NEVER place a product in an unstable location.

• NEVER place the product on tall furniture (for example, cupboards or

bookcases) without anchoring both the furniture and the product to a

suitable support.

• NEVER place the product on cloth or other materials that may be located

between the product and supporting furniture.

• NEVER place items that might tempt children to climb, such as toys

and remote controls, on the top of the product or furniture on which

the product is placed.

• If the existing product is going to be retained and relocated, the same

considerations as above should be applied.

WARNING: Usage of other than specied head- or earphones can

result in hearing loss due to excessive sound pressures.

Restriction on Hazardous Substances

statement (India)

This product complies with the “India E-Waste (Management) Rules, 2016”

and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated

biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration

exceeding 0.1% by weight in homogenous materials and 0.01% by weight in

homogenous materials for cadmium, except of exemptions listed in Schedule

2 of the Rule.

viii

Prevent Tipping

When using the display, fasten the LCD to a wall using a cord or chain that can

support the weight of the monitor in order to prevent the monitor from falling.

Cord or chain

• Display design may differ from those illustrated.

• Installing must be done by a qualied technician , and please

contact your supplier for more information.

• For the Models with net weight >=7kg. Please select the

suitable way to Prevent Tipping.

• Please use the method discribed in the above image to tie the

cord or chain to the stand and then x it to the wall.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the

cables and power cord. Follow the correct lifting techniques when

positioning the monitor. When lifting or carrying the monitor, grasp the

edges of the monitor. Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the

monitor surface with a lint-free, non-abrasive cloth. Stubborn stains

may be removed with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner

intended for use with the LCD. Never spray cleaner directly on the

screen, as it may drip inside the monitor and cause an electric shock.

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not be

placed in municipal waste.

Please check local regulations for disposal of electronic products.

AEEE yönetmeliğine uygundur

The following symptoms are normal with

the monitor:

• The screen may icker during the initial use due to the nature of the

uorescent light. Turn off the Power Switch and turn it on again to make

sure that the icker disappears.

• You may nd slightly uneven brightness on the screen depending on

the desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the

previous screen may remain after switching the image. The screen will

recover slowly or you can turn off the Power Switch for hours.

• When the screen becomes black or ashes, or cannot work anymore,

contact your dealer or service center to x it. Do not repair the screen

by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when

trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

Where to find more information

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may

have been added by your dealer. These documents are not part of the

standard package.

Indice

Altri manuali Asus Monitor

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione

LG M1950D-PZ Manuale utente