Asus WL-500gP Manuale utente

Index

1.English...........................................................................................1

2.ไทย ..............................................................................................10

3.Türkçe..........................................................................................18

4.繁體中文 ......................................................................................26

5.简体中文 ......................................................................................35

6.한국어..........................................................................................43

7.日本語..........................................................................................51

EnglishTürkçe

繁體中文

简体中文

한국어

日本語

Quick Start Guide

WL-500gP V2 Wireless Router

English

WL-500gP V2 Wireless Router Quick Start Guide

English

The ASUS WL-500gP V2 Wireless Router can meet various working scenarios with proper

conguration. The default settings of the wireless router may need change so as to meet your

individual needs. Therefore, before using the ASUS Wireless Router, check the basic settings to

make sure they all work in your environment.

ASUS provides a utility named EZSetup for fast wireless conguration. If you would like to use

EZSetup for your router conguration, refer to chapter 6 of user manual in support CD.

Note: Wired connection for initial conguration is recommended to avoid possible

setup problems due to wireless uncertainty.

1) Wired connection

The ASUS WL-500gP V2 Wireless Router is supplied with an Ethernet cable in the package.

Since the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use

either straight-through or crossover cable for wired connection. Plug one end of the cable to the

LAN port on the rear panel of the router and the other end to the Ethernet port on your PC.

2) Wireless Connection

For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer

to your wireless adapter user manual for wireless connection procedures. By default, the

SSID of ASUS Wireless Router is “default” (in lower case), encryption is disabled and open

system authentication is used.

3) Setting IP address for wired or wireless client

To access WL-500gP V2 Wireless Router, you must have correct TCP/IP settings on your wired or

wireless clients. Set the IP addresses of the clients within the same subnet of WL-500gP V2.

Getting IP address Automatically

The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your

PC get IP address automatically from the ASUS Wireless Router.

Note: Before rebooting your PC, switch ON the

wireless router and make sure the router is ready.

Setting up IP address Manually

To set IP address manually, you need to know the default

settings of the ASUS Wireless Router:

• IP address 192.168.1.1

• Subnet Mask 255.255.255.0

Getting started

WL-500gP V2 Wireless Router Quick Start Guide

English

To set up the connection with a manually assigned

IP address, the address of your PC and the wireless

router must be within the same subnet:

• IP address: 192.168.1.xxx (xxx can be any

number between 2 and 254. Make sure the IP

address is not used by other device)

• Subnet Mask: 255.255.255.0 (same as WL-500gP

V2)

• Gateway: 192.168.1.1 (IP address of WL-500gP

V2)

• DNS: 192.168.1.1 (WL-500gP V2), or assign a

known DNS server in your network.

4) Conguring the wireless router

Follow the steps below to enter the Web conguration interface of WL-500gP V2.

Defaults

User name: admin Password: admin

Enter the following address in your

web browser: http://192.168.1.1

After logging in, you can see the ASUS Wireless Router home page.

The homepage displays quick links to congure the main features of the wireless router.

WL-500gP V2 Wireless Router Quick Start Guide

English

1. Select your time zone and click

Next.

5) Quick setup

To start quick setup, click Next to enter the “Quick Setup”

page. Follow the instructions to setup the ASUS Wireless

Router.

2. ASUS wireless router supports

five types of ISP services: cable,

PPPoE, PPTP, static WAN IP,

and Telstra BigPond. Select your

connection type and click Next to

continue.

Cable or dynamic IP user

If you are using services provided by

cable ISP, select Cable Modem or other

connection that gets IP automatically.

If your ISP provides you hostname, MAC

address, and heartbeat server address,

fill these information into the boxes on

the setting page; if not, click Next to skip

this step.

PPPoE user

If you use PPPoE service, select ADSL

connection that requires username

and password. It is known as PPPoE.

You need to input the username and

password provided by your ISP. Click

Next to continue.

WL-500gP V2 Wireless Router Quick Start Guide

English

3. Setting up your wireless interface.Specify

to your wireless router an SSID (Service

Set Identier), which is a unique identier

attached to packets sent over WLAN.

This identifier emulates a password

when a device attempts to communicate

with your wireless router via WLAN.

If you want to protect transmitted data, select a Security Level to enable encryption methods.

Medium: Only users with the same WEP key settings can connect to your wireless router

and transmit data using 64bits or 128bits WEP key encryption.

High: Only users with the same WPA-PSK Key settings can connect to your wireless router

and transmit data using TKIP encryption.

PPTP user

If you are using PPTP services, select ADSL

connection that requires username,

password and IP address. Fill in the

username, password and IP address

provided by your ISP into the fields. Click

Next to continue.

Static IP user

If you are using ADSL or other connection

type that uses static IP address, select ADSL

or other connection type that uses static

IP address. Input the IP address, subnet

mask, and default gateway provided by your

ISP. You can specify DNS servers, or get

DNS information automatically.

herk036@adsl-comfort

WL-500gP V2 Wireless Router Quick Start Guide

English

4. Input four sets of WEP keys in the WEP

Key fields (10 hexadecimal digits for

WEP 64bits, 26 hexadecimal digits

for WEP 128bits). You can also let the

system generate the keys by inputting

a Passphrase. Record the Passphrase

and the WEP keys in your notebook,

then click Finish.

For example, if we select WEP 64bits

encryption mode and input 11111 as

the Passphrase, the WEP Keys are

generated automatically.

5. Click Save&Restart to restart the

wireless router and activate the new

settings.

6. Connect to the wireless router via wireless

To connect the wireless router from a wireless client, you can use Windows®Wireless

Zero Conguration service to set up the connection. If you use ASUS Wireless Card on

your computer, you can use the One Touch Wizard utility supplied in WLAN Card support

CD for wireless connection.

Conguring ASUS WLAN Card with One Touch Wizard

If you have installed ASUS wireless card together with its utilities and drivers on your PC, click

Start -> Programe -> ASUS Utility-> WLAN Card -> One Touch Wizard to launch the One

Touch Wizard utility.

WL-500gP V2 Wireless Router Quick Start Guide

English

3) Set the authentication and encryption of

your WLAN card the same with those at

WL-500gP V2. In the previous steps the

Key Length is 64 bits, Passphrase is

11111 Click Next to continue.

1) Select Connect to an existing wireless

LAN (Station) radio button and click

Next to continue.

2) One Touch Wizard searches and displays

the available APs in the Available

Networks list. Select WL-500gP V2 and

press Next to continue.

4) It takes several seconds for the wireless

card to associate with WL-500gP V2.

Press Next to setup TCP/IP for your

WLAN Card.

5) Setup the IP address of the WLAN Card

according to your network condition.

After the setup is complete, click Finish

to exit the One Touch Wizard.

WL-500gP V2 Wireless Router Quick Start Guide

English

7. Conguring advanced features

To view and adjust other settings of the wireless router,

enter the Web configuration page of WL-500gP V2.

Click on items on the menu to open a submenu and

follow the instructions to setup the router. Tips show up

when you move your cursor over each item. Refer to

user manual in support CD for detailed information.

Conguring WLAN card with Windows®WZC service

If you use non-ASUS wireless card, you can set up the wireless connection with Windows®

Wireless Zero Conguration (WZC) service.

2) Input the 10-digit keys you have set on

the wireless router and click Connect.

The connection is complete within

several seconds.

1) Double-click the wireless network icon on

the task bar to view available networks.

Select your wireless router and click

Connect.

Altri manuali per WL-500gP

Indice

Lingue:

Altri manuali Asus Router di rete

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza