ATA Saphir 330 Manuale utente

330Saphir

Instruction Manual

Metallography

ATM GmbH Driescheider Weg 57 D-57610 Altenkirchen Tel. 0 26 81/95 39 -0 Fax 0 26 81/95 39 -20 eMail [email protected] Web http://www.atm-m.com

Grinding- / polishing machine

Saphir 330

follow all instructions and safety

regulations in any case.

Equipment

Model

Acceptance

Date

Signature

made in Germany

This instruction manual is part of

delivered equipment. Please,

330Saphir

Instruction Manual

Metallography

0.1 Nameplate

Saphir 330

600 rpm

400 50 0,55

330Saphir

Instruction Manual

0.2 Declaration of Confirmity

EC-Declaration of Confirmity

Following art 4 and annex II point C of european directive 89/392/EEC and complements

We hereby certify that the following safety component complies with all the relevant Essential health and Safety

Requirements of the EC Machinery Directive 89/392/EEC as amended and the National Laws and Regulations

adopting this directive.

Description of equipment: Grinding- / polishing machine

Type: Saphir 330

Serial No.:

European directive(s): EC-machinery directive (89/392/EEC)

EC-low voltage directive (73/23/EEC)

European standards: EN 292-1 / EN 292-2

National standards and Manufactured in Germany

specifications:

Date/Manufactures-Signature: ATM GmbH

Position: Manager

ATM GmbH

330Saphir

Instruction Manual

Metallography

0.1 Nameplate 2

0.2 Declaration of confirmity 3

0.3 Contents 4 - 5

1.0 Product Describtion

1.1 Introduction 6

1.2 General Describtion and features 7

1.2.1 Main drive 7

1.3 Technical Data 7

1.4 Measures and installation 8

2.0 Safety Regulations

2.1 General precautions 9 - 10

2.1.1 Warning sign 9

2.1.2 General 9

2.1.3 Safety information 9 - 10

2.1.4 Emergency statement 10

2.2 Safety test 11

3.0 Operation

3.1 General 12

3.2 Control display 13

3.3 Coolant connection, drain and electrical connection 14

3.3.1 Connections back 14

3.3.1.1 external coolant inflow 14

3.3.1.2 electrical connection 14

0.3 Contents

Index Page

330Saphir

Instruction Manual

Metallography

4.0 Starting

4.1 Introducing 15

4.2 Installated equipment 15

4.3 Conditions 15

4.4 Put on working wheel 16

4.5 Grinding / polishing by hand 17

5.0 Maintenance

5.1 Introducing 18

5.2 Drain cleaning 18

5.3 Cabinet cleaning outside 18

6.0 Dispatch

6.1 packing 19

6.2 shipping 19

7.0 Disturbance and steps 20

8.0 List of spare parts 21

9.0 Electrical chart 22 - 23

Index Page

330Saphir

Instruction Manual

Metallography

1.0 Product Describtion

1.1 Introducing

Saphir 330 is a grinding-/ polishing

machine for manual wet grinding or

polishing of different materials,

suitable for laboratory and industry.

Through variable driving possibilities

(switch over for 2 speeds or

variable speed) Saphir 330 allows

different opportunities for grinding

and polishing.

Different operation speed is realized

through various working wheels

(Diameter 200, 230, 250mm).

Also grinding paper and polishing

cloths, which are used at present

could be operated further more.

For half automatic operation

standard machine Saphir 330 could

be retrofitted at any time with

automatic attachment Rubin 500.

Working wheel Water valve

Main switch

330Saphir

Instruction Manual

Metallography

1.2 Technical Data Saphir 330

Electrical specification 400V / 50Hz; 3 phases

Motor power 0,55 kW

Working wheel Diam. 200, 230, 250 mm

Speed 150 or 300 rpm

optional 150 and 300 rpm 0,3 / 0,45kW

optional 50-600 rpm

Weight approx. 45 kg

Measures (WxHxD) approx. 670x260x580 mm

Cabinet welded aluminium mono bloc construction

Admissible temperature of environs 0 - 40°C

Admissible temperature of shipping 0 - 40°C

Admissible temperature of storage 0 - 40°C

1.2.1 Main drive

Saphir 330 is equipped with a powerful motor, which is connected with

maintanance-free V-belt to the working wheel.

1.0 Product Describtion

1.2 General describtion and features

330Saphir

Instruction Manual

Metallography

1.4 Measures and installation

It is not necessary to set-up the Saphir 330 on a special place, a flat table

is enough. It must be available a electrical and water connection.

330Saphir

Instruction Manual

Metallography

2.0 Safety regulations

2.1 General precautions

2.1.1 Warning sign

!This sign point to special fea-

tures on the machine.

2.1.2 General

Attention of this instruction manual with safety precausions is condition for

not dangerous operation with Saphir 330.

Instruction of operator is necessary. Constructive changes and wrong opera-

tion expires warranty claims. Failures have to be reported to supplier (manu-

facturer).

2.1.3 Safety information

!Unit has to be operated according to instructions only.

!Before opening unit main plug has to be disconnected.

!Don´t leave any parts on working wheel.

!Don´t put anything on top or into air slots.

!Watch that air slots are always open.

!If you don´t use unit over a long time (e.g. over night) please turn

extern water supply off.

!Regular installation is necessary (look at 4.0). Instruction of operator

is necessary. In case of wrong installation you don´t get warranty

claims.

330Saphir

Instruction Manual

Metallography

2.1.4 Emergency statement

!Grinded samples has to be holded firmly on working wheel.

Attention: Side tilt of samples give rise to catapult away.

!Hold samples with both hands, if possible.

!Operator has to be instructed in case of cutting injuries with contact of

coolants and abrasives.

Indice

Manuali Macinacaffè popolari di altre marche

Parkside

Parkside PWS 230 C3 Manuale utente

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Manuale tecnico

PTA

PTA P1322 Manuale utente

Crown

Crown CT13313 Manuale utente

Parkside

Parkside 280250 Manuale utente

Climax

Climax VM2150 Series Manuale utente

Jet

Jet JPSG-618M1 Manuale di servizio

Makita

Makita GA4030 Manuale utente

DeWalt

DeWalt DWEN202 Manuale utente

Grizzly

Grizzly G2790 Manuale utente

Fein

Fein MSf843-1a Manuale utente

Bosch

Bosch GWS 14,4 V PROFESSIONAL Manuale utente

RAMSET

RAMSET CBAGR18 Manuale utente

Bosch

Bosch 8-115 Z Manuale utente

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Manuale utente

MW TOOLS

MW TOOLS ME15W Manuale utente

Caravaggi

Caravaggi SP 20 Istruzioni operative

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Manuale tecnico