AT&T BGW320 Manuale utente

1BGW320INTERNALONT

A simple guide

Setting Up

Your Battery

Backup

2

How to Install:

PSI Rechargeable Battery Units for your Gateway

Before you begin:

Each battery stack will provide up to 16 hours of backup power. One battery

stack will be connected to the Gateway to provide automatic backup and will

need to be replaced with the other standby battery stack as needed during

an outage.

Keep standby rechargeable battery stack connected to power source to

maintain charge.

Prepare standby backup

rechargeable batteries

Connect the other three rechargeable batteries and the power supply to the

other backplane and plug into an electrical outlet (not controlled by a wall

switch). Note: to get the best power available, you should plug your battery

stack directly into a wall receptacle.

What you need:

•(2) PSI Li-75 Power Supplies

•(6) PSI PS36L-EX Batteries

•PSI-BGW320 Adapter Cable

1 2

Connect ﬁrst backup battery:

Disconnect existing black

power supply from the

Gateway and wall outlet.

Stack three battery units

and the power supply on the

backplane.

3Connect the rechargeable 4

battery stack to the Gateway

using supplied power cord.

Make sure the battery is On

and the Gateway is working.

Completed Setup

3

Important information:

•Each battery stack will provide up to 16 hours of backup power. One stack

will be connected to the Gateway to provide automatic backup and

should be replaced as needed. The other will be a standby battery stack

to use during a power outage.

•Keep all rechargeable batteries connected to a power source to

maintain charge.

Note: Battery Backup unit will not power a cordless phone. It will only power

a corded phone.

Replace your batteries:

How to Check & Replace:

PSI Rechargeable Battery Units

2Connect the fully charged

standby battery stack into

the Gateway.

1Unplug the entire battery

stack from the Gateway.

3Press the Cold Start Button on 4

the Power Supply.

Press the Power Button on

the Gateway.

Recharge your batteries:

Make sure the old battery is connected to the power outlet so it will recharge

when the power comes back on.

Check your batteries:

It’s important to check your batteries periodically to ensure full charge in

case of a power outage. Your batteries will automatically display the charge

level when turned on—if the battery is exhausted, replace it with one of

the standby units.

4

If your phone does not have a dial tone during a power outage:

Troubleshooting:

For PSI Rechargeable Battery Units

NEED MORE HELP & TROUBLESHOOTING?

Check your Gateway and

Rechargeable Batteries

2If Gateway does not have power, make sure:

•Gateway is plugged into rechargeable battery

•Rechargeable battery is turned On

•Rechargeable battery still has a charge. If not, replace

it with one of the standby rechargeable batteries.

1Make sure corded phone is plugged into the Gateway.

Make sure Gateway is connected to AT&T network box.

3

PSI Rechargeable Battery Units:

go to https://www.powertecsolutions.net/solutions/att-solutions/

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

RTA

RTA 460MCBC-N2E Scheda tecnica