AT&T RM 5400 Documento tecnico
Equipment information
and assembly guide for your AT&T Service
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
Please ensure that you have set-up the equipment before the date scheduled
with your AT&T Order Manager for Test and Turn Up of your site
The following components are included in your router package:
What’s in the Box
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
2
Cisco 2901 Router
Router power cable
Site Documentation
Package
RM 5400
RJ11 modem cable
Labelled ISE644
RJ45 Cable
Labelled ISE693
RJ45 Cable
Labelled ISE-10301
Understanding your Router
Rear View of Cisco 2901Front View of Cisco 2901
Power
Socket
On/Off Switch
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
3
GE0/1
RJ-45 Console Port
GE0/0
Understanding your Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
4
Rear View of RM 5400Front View of RM 5400
Understanding your RM 5400 Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
5
Rear Panel of RM 5400
Front Panel of RM 5400 modem
Step 1 Attach Power Cables to Router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
6
To power
receptacle
Plug in power cord to router
Step 2: Setup the RM 5400 Modem
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
7
11
2
3
1. Connect the two antennas to ANT1 and ANT 2
2. Connect the Power Supply and turn the power on.
3. Wait for a couple of minutes till front panel lights are stabilized
4. Setup the RM 5400 Modem where you can get at least 2 Signal Strength lights are lit
5. Move around up to 25 feet from the Router if necessary to get 2 signals.
6. Secure the RM 5400 modem to any permanent fixture
Step 3 Connect RM 5400 Modem to the Router
Connect console cable to the lower
right, blue-edged console port in router
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
8
To wall jack
RM 5400
RJ45 Cable
Labelled ISE-10301
Connect to more device console ports if needed as shown
Step 4 Connect Router to Access Circuits
Connect the RJ45 cable (from the Smart Jack) to the GE0/0 port (Upper far
right) or per instructions in your Site Documentation Package.
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
9
RJ45 Cable
Labelled ISE693
To smart jack
Step 5 Connect Router to your Local Network
For connection, plug your Ethernet cable RJ45 into GE0/1 port on back of router
(Lower right) or per instructions in your Site Documentation Package.
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, Globe logo and other marks are trademarks of AT&T Intellectual Property.
10
Customer provide
LAN Cable
Other end of Ethernet cable can be plugged into server, computer, private network, etc.
Power on installed equipment.
Installation is complete
Altri manuali per RM 5400
1
Indice
Altri manuali AT&T Modem
AT&T
AT&T AT&T USBConnect Force 4G Manuale utente
AT&T
AT&T USB800 Istruzioni per l'installazione
AT&T
AT&T USBConnect Mercury Manuale utente
AT&T
AT&T 3G MicroCell Manuale utente
AT&T
AT&T Turbo Hotspot 2 Manuale utente
AT&T
AT&T IIM2100M Manuale utente
AT&T
AT&T U120 Manuale utente
AT&T
AT&T FIRSTNET AirgainConnect AC-HPUE Manuale utente
AT&T
AT&T 202T Manuale utente
AT&T
AT&T High Speed Internet Service Manuale utente
