ATEN UC485 Manuale utente
UC485
USER MANUAL
USB to RS-422/485 Adapter
EMC Information
FEDERAL COMMUNICATIONS COMMISSION STATEMENT: This
equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Warning: Operation of this equipment in a residential environment could cause
radio interference.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
KCC Statement
이기기는 업무용 (A 급) 전자파 적합기기로서 판매자 또는 사용자는 이
점을 주의하시기 바라며 , 가정외의 지역에서 사용하는 것을 목적으로
합니다 .
RoHS
This product is RoHS compliant.
- 3 -
UC485 User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://eservice.aten.com
For North American technical support:
International http://eservice.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8-4481-58923
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4998
- 4 -
Package Contents
The UC485 USB to RS-422/485 Adapter package contains the
following items:
1 UC485 USB to RS-422/485 Adapter
1 Terminal Adapter
1 User Instructions*
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to preventany damage totheunit,
and/or any of the devices connected to it.
*Features may have been added to the UC485 since this
manual was printed. Please visit our website to download the
most up-to-date version of the manual.
Copyright © 2017 ATEN® International Co., Ltd.®
Manual Date: 2017-08-31
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights
reserved. All other trademarks are the property of their respective owners.
- 5 -
Overview
The ATEN UC485 USB to RS-422/485 Adapter is a high quality
industrial adapter cable designed to instantly add an RS-422 /
RS-485 port to your PC or laptop via a USB port. The adapter is
powered via the USB connection, therefore an external power
supply is not needed.
The UC485 adapter lets you use a single USB connection to
create plug-and-play serial transfers without additional cables or
complicated device installations. It lets you connect any RS-485
or RS-422 device to your computer's USB port without
experiencing computer lock-ups, I/O or driver problems. It is the
idealsolutionforconnectingindustrialdevices suchas laboratory
machines, measuring equipment, automated systems,
monitoring devices, and many more – where mission-critical
applications are required.
- 6 -
Features
Converts a USB port to a Legacy COM port
DB-9 female to terminal block adapter for easy wiring
Fast COM Port Transmission – up to 921.6 Kbps per serial
port
Supports Windows Vista, 7 and above, Mac and Linux
LEDs for indicating RS-422 (Orange) or RS-485 (Green)
Supports Terminal/ECHO setting by switch
Plug-and-Play – no power supply needed
Supports USB hot-plugging
- 7 -
System Requirements
Hardware
1 USB enabled computer
Software
Windows Vista, 7 and above, Mac and Linux
- 8 -
Components
UC485
No. Component Description
1 USB Connector This connector plugs in a USB enabled computer.
2 DB-9 Connector Connect this end of the cable to an RS-422 or RS-485 serial
device.
3 Connector Nut This nut provides aninlet for the connector screws on the Terminal
Adapter (included with this package).
4 Power LED This LED lights Orange (RS-422) or Green (RS-485) to indicate
the adapter is connected and powering a device from the
computer’s USB port.
5 Mode Selector These three DIP switches allow you to configure the Terminator,
Echo, and device settings.
6Terminal
Connectors These five terminal blocks provide a wired connection to the serial
device.
6
7
2
4
3
5
Cable
1
8
Terminal
Adapter
- 9 -
7 DB-9 Connector
(Female) The terminal adapter plug connects to the cable’s DB-9 connector.
8 Connector
Screws These two screws go into the connector nuts on the cable’s DB-9
connector.
No. Component Description
- 10 -
Installation
Hardware
To setup the UC485, use the diagram on the next page (the
numbers in the diagram correspond with the numbered
instructions below), and do the following:
1. Plug the USB connector to the computer and allow the drivers
to install.*
2. Plug the DB-9 connector to an RS-422/RS-485 serial device.
3. (Optional) If you are using the terminal connectors, plug the
Terminal Adapter included with this package into the DB-9
Connector, secure the connector screws, and then use the
terminal blocks to wire a device to the UC485 (SEE PAGE).
4. Use the Mode Selector to configure the DIP switch settings
for the connection type (SEE PAGE).
5. Power on the serial devices.
Note: Ifyouareusing an oldercomputerthatdoesn’tcontainthe
drivers for this device, please go to our website to
download the UC485 drivers and install them before
setting up the hardware.
1. Make sure that the power to any device that you
connect to the installation has been turned off.
2. Make sure that all devices you will be installing are
properly grounded.
Altri manuali per UC485
1
Indice
Altri manuali ATEN Adattatore
ATEN
ATEN UC232B-AT Manuale utente
ATEN
ATEN KA7171 Manuale utente
ATEN
ATEN UC232B Manuale utente
ATEN
ATEN UC-232A Manuale utente
ATEN
ATEN IC-428P Manuale utente
ATEN
ATEN UC-100KM Manuale utente
ATEN
ATEN UC-100KMA Manuale utente
ATEN
ATEN RCMA200SA Manuale utente
ATEN
ATEN UC232C Manuale utente
ATEN
ATEN cs533 Manuale utente
ATEN
ATEN UC-100KMA Manuale utente
ATEN
ATEN CAMLIVE Manuale utente
ATEN
ATEN UC-10T Manuale utente
ATEN
ATEN UC232C Manuale utente
ATEN
ATEN UC232B Manuale utente
ATEN
ATEN UC-232A Manuale utente
ATEN
ATEN UC-100KM Manuale utente
ATEN
ATEN CV211CP Manuale utente
ATEN
ATEN UC485 Manuale utente
ATEN
ATEN KA7171 Manuale utente
