Atid ATS100 Manuale utente
User Guide
Before Using
Product Composition
Name of each part
QUAD LOCK®Mounting & Type
Smart Phone Mounting
Gun Handle Removal & Mounting
Displaying LED by Status
Power ON & OFF
Communication Mode Setting
Barcode and RFID Setting
Charging Device
Charging Device (Using USB Port via PC)
Charging Device (Using Cradle)
Support Concurrent Charging of Smart Phone
Using Bluetooth Data Communication Mode
Using USB Data Communication Mode
Bluetooth Connection with Android Phone
Bluetooth Connection with iPhone
Bluetooth Connection with Windows
USB Connection with Windows
ATS100 Specications
Product Warranty
----------------------------------------------------------------------------------- 3
---------------------------------------------------------------------- 6
--------------------------------------------------------------------------- 6
------------------------------------------------------- 7
-------------------------------------------------------------------- 8
---------------------------------------------------- 9
------------------------------------------------------------- 10
--------------------------------------------------------------------------- 10
-------------------------------------------------------- 10
------------------------------------------------------------- 10
---------------------------------------------------------------------------- 11
--------------------------------------- 11
----------------------------------------------------- 12
------------------------------- 12
---------------------------------- 13
------------------------------------------ 14
------------------------------------ 15
------------------------------------------------- 27
--------------------------------------------- 32
----------------------------------------------------- 36
------------------------------------------------------------------- 44
------------------------------------------------------------------------- 47
2
Contents
The copyright of this manual can be found on ATID.
Unauthorized use or reproduction of part or all of the contents of this manual without prior permission of ATID is prohibited.
3
Before Using
- The following conventions are used throughout this document to
convey certain information.
- Technical Support via the Internet is available 24 hours per day, 365
days per year.
- This device may not cause harmful interference, and this device must
accept any interference received, including interference that may cause
undesired operation
In no event shall Atid Co., Ltd. or anyone else involved in the creation,
production, or delivery of the accompanying product (including
hardware and software) be liable for any damages whatsoever (including,
without limitation, consequential damages including loss of business
prots, business interruption, or loss of business information) arising
out of the use of, the results of use of, or inability to use such product,
even if Atid Co., Ltd. has been advised of the possibility of such damages.
Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not
apply to you.
Charging Precautions
Do not place heavy material
near device and do not pull
power supply hardly.
Use damaged power supply
may cause problem
please replace it.
Icons Used
Caution Warns you of a situation
where unpredictable happen or
damage
Caution Warns you of a potential
water shock situtation
4
Precautions when Using
Do not place the device next to
heating equipment
(It may cause conagration or
electronic damage.)
Do not use chemical
on the device but wipe it out
with smooth cloth or tower.
Icons used
Caution Warns
you of a situation
where unpredictable
happen or damage
Caution warns you of
a ban on disassemble
Caution Warns you
of a potential water
shock situation
Do not place too many
power supply at the same time
(It may cause conagration or
electronic damage)
Be careful not to let liquid or
pull power supply.
(It may cause failure and
electronic damage)
In cleaning, do not splash water.
(It may cause conagration or
device failure.)
Do not install the device
in a place subject to direct
sun light, humidity and dust.
(It may cause conagration or
electronic damage.)
Do not place a magnet near the
product
Do not disassemble , x device
and remodel device manually.
Atid Co.,Ltd. is not responsible
for any damage to or loss
5
6
Name of each part 5
7
6
4
3
2
1
1 Power Button
2 Switch to Communication
mode
3 Reset Button
4 Trigger
5 QUAD LOCK®Connection Port
6 2D Barcode Scanner
7 UHF
8 Barcode / RFID Switch Button
9 Charge Indicator
10 Barcode / RFID Indicator
11 Communication Mode
Indicator
12 Hand strap Hole
13 Sync Cable Connector
14 Gun Handle Removal Button
15 Gun Handle (With Battery)
16 Cradle Connector
Product Composition
ATS100 Main Body
Hand strap
Gun Handle
(With Battery)
QUAD LOCK®Mount
(Option)
USB Sync Cable (Type-C)
QUAD LOCK®Adapter
(Option)
User Guide &
Warranty Strap
Cradle
(Optional item)
14
13
12
15
16
11
10
9
8
M
Caution
Do not connect any other such as USB than supplied QUAD LOCK®
to QUAD LOCK Connection port, it may cause malfunction of the
Device.
7
1 The QUAD LOCK®contacts need
to be face down at the top of the
device to meet the contacts shown
in the image right.
3 The QUAD LOCK®can be locked into
position image right.
QUAD LOCK® Mounting
LOCK UNLOCK
QUAD LOCK® Type
Type-C Micro USB
We may provide USB Type-C and
Micro USB.
*The standard USB cable will be Type-C.
2 The QUAD LOCK®direction to push is
shown in the diagram right.
8
1 Ensure the phone is tted into its
QUAD LOCK®case before attaching
the case to the ATS100.
2 Make sure all of the contacts -
on both the QUAD LOCK®socket
3 Align the phone towards 45 degrees
into the right place.
4 To put USB cable Phone USB Port.
Smart Phone Mounting
Notice
If you don't want to use USB,
it's not mandatory to use it.
please note it.
9
1 Press removal button
3 Pull up the gun to release completely.
2 Pull out the gun to the
right side to release it
Gun Handle Removal
Gun Handle Mounting
Warning
Be careful your hand
When you Control
Gun Handle
2 Push the gun to the left side to
mounting the gun
1 The Gun Handle needs to be
face down at the device to meet
the right place as image.
10
Power ON
Press Power Button ( ) for a second then release with beep.
Power OFF
Press Power Button ( ) for a second.
Charging Indicator
- Red LED Blink : Low Battery
- Red LED ON : Charging
- Green LED ON : Charging Complete
Barcode / RFID Indicator
- Blue LED ON : Barcode Mode
- Blue LED Blink : Trigger Input Mode
- Blue LED OFF : RFID Mode
Communication Mode Indicator
- Green LED Blink : Bluetooth Mode
- Red LED Blink : USB Mode
Communication Mode Setting
Press arrow ( ) button it can be connected Bluetooth or USB.
(Switching mode will be taked a couple of seconds)
Press M - Barcode mode, RFID and Trigger scanning mode.
Barcode and RFID setting
Displaying LED by Status
Communication Mode
Indicator
Barcode / RFID Indicator
Charging Indicator
Altri manuali per ATS100
2
Indice
Altri manuali Atid Altro
