Atlas Copco SmartHEAD Manuale utente

smartHEAD Installation Guide

1 (4) 9836 4569 01 Revision 4

smartHEAD INSTALLATION GUIDE

Index:

INSTALLING THE smartHEAD on the STwrench.................................................................................2

INSTALLING THE smartHEAD on the MRTT-C...................................................................................3

GENERAL

The smartHEAD, to be installed on the STwrench and MRTT-C,

defines the wrench capacity. You can install or change the smartHEAD

without the need of any further settings or calibration: the STwrench

and STanalyser loads automatically the transducer data at the power

on.

PACKAGE

Refer to the check list included for the package list.

SAFETY

Warning: Read the STwrench Product Instruction (No. 9836 4489 00) and MRTT-C User Guide (No.

9836 5984 01) before installing and using the product.

HANDLING

The module is electrostatic sensitive device; DO NOT touch any electrical contact to avoid risk of

module damages.

If possible, before handling any STwrench modules, touch with your hand a big metallic object,

in order to avoid electrostatic discharges while handling the modules.

Observe the following precautions to handle the module:

Correct handling: NOT correct handling:

smartHEAD Installation Guide

2 (4) 9836 4569 01 Revision 4

INSTALLING THE smartHEAD on the STwrench

1. SWITCH OFF THE STwrench.

2. INSERT THE smartHEAD IN THE WRENCH CONTROLLER AND TIGHTEN THE LOCKING NUT UNTIL

WHEN THE “CLICK” IS HEARD

NOTE: there is only one way to insert the smartHEAD into the wrench controller. The guide and

the reference pin must be inserted in the relative housings; do not force them in other position.

3. TURN ON THE STwrench

4. IF THE FOLLOWING MESSAGE IS SHOWN, CHECK THE DATE AND SELECT YES TO CONTINUE

AND USE THE smartHEAD (the first use date is set at the date shown):

Guide

Reference PIN

Locking nut

smartHEAD

smartHEAD Capacity Indication

STwrench

smartHEAD Installation Guide

3 (4) 9836 4569 01 Revision 4

Selecting No the first date is not set, but the smartHEAD is blocked. The messsage above is

shown again at the next STwrench power on.

5. IF THE smartHEAD IS NOT PROPERLY INSTALLED THE FOLLOWING MESSAGE IS SHOWN:

NOTE: each smartHEAD is intended to be associated to a single STwrench controller!

The smartHEAD interchangeability assures easy and fast maintenance operations and wrench

upgrade. IMPORTANT NOTE:

Assembling different heads on the same controller during the normal wrench operations is an

improper use of the modularity concept, and will invalidate the warranty on the wrench

components.

The smartHEAD should be left always connected to the controller. For example, do not

disassemble it at the end of the day of for wrench transportation.

INSTALLING THE smartHEAD on the MRTT-C

6. DISCONNECT THE MRTT-C FROM THE STanalyser / STa 6000.

Locking nut

smartHEA

MRTT

Date

smartHEAD Installation Guide

4 (4) 9836 4569 01 Revision 4

7. INSERT THE smartHEAD IN THE MRTT-C AND TIGHTEN THE LOCKING NUT UNTIL WHEN THE

“CLICK” IS HEARD

NOTE: there is only one way to insert the smartHEAD into the MRTT-C. The guide and the

reference pin must be inserted in the relative housings; do not force them in other position.

8. CONNECT THE MRTT-C TO THE STanalyser / STa 6000 AND TURN ON THE STanalyser / STa 6000

9. IF THE FOLLOWING MESSAGE IS SHOWN ON STa 6000, CHECK THE DATE AND SELECT YES TO

CONTINUE AND USE THE smartHEAD (the first use date is set at the STa 6000 date):

Selecting No the first date is not set, but the smartHEAD is blocked. The messsage above is

shown again at the next STa 6000 power on.

10. IF THE smartHEAD IS NOT PROPERLY INSTALLED THE Transducer Error MESSAGE IS SHOWN.

NOTE: each smartHEAD is intended to be associated to a single MRTT-C!

The smartHEAD interchangeability assures easy and fast maintenance operations and system

upgrade. IMPORTANT NOTE:

Assembling different heads on the same MRTT-C during the normal operations is an improper

use of the modularity concept, and will invalidate the warranty on the wrench components.

The smartHEAD should be left always connected to the MRTT-C. For example, do not

disassemble it at the end of the day of for transportation.

Guide

Reference PIN

Date / time

Indice

Altri manuali Atlas Copco Utensili elettrici

Atlas Copco

Atlas Copco EP6PTI32 HR10-MT Istruzioni originali

Atlas Copco

Atlas Copco ETP ST101-1000-25-F Istruzioni originali

Atlas Copco

Atlas Copco ETC ST81-50-15-LO5 Manuale utente

Atlas Copco

Atlas Copco ETPST32-10-i06 Foglio di istruzioni

Atlas Copco

Atlas Copco PRO W2631 Manuale utente

Atlas Copco

Atlas Copco LG 504 Guida alla manutenzione e all'assistenza

Atlas Copco

Atlas Copco EP8PTI70 HR10-MT Foglio di istruzioni

Atlas Copco

Atlas Copco ETD M 25 AVB Foglio di istruzioni

Atlas Copco

Atlas Copco QST42-50CT-T50-L334-H13 Foglio di istruzioni

Atlas Copco

Atlas Copco ETV ST81-120-HAD Istruzioni originali

Atlas Copco

Atlas Copco RTX-18 Manuale utente

Atlas Copco

Atlas Copco ETD MT41-50-HM4 Istruzioni originali

Atlas Copco

Atlas Copco LMS08 SR42 Foglio di istruzioni

Atlas Copco

Atlas Copco QST50-90CT-T50-L137-H13 Foglio di istruzioni

Atlas Copco

Atlas Copco RTX-14 Manuale utente

Atlas Copco

Atlas Copco ITB-A61-50-10 Manuale utente

Atlas Copco

Atlas Copco Cobra mk1 Manuale utente

Atlas Copco

Atlas Copco ETV ST81-150-HAD Istruzioni originali

Atlas Copco

Atlas Copco ETD STR61-70-13 Foglio di istruzioni

Atlas Copco

Atlas Copco ITB-A61-30-10 Istruzioni originali

Atlas Copco

Atlas Copco ETD MT41-100-I06 Foglio di istruzioni

$Atlas Copco TEX150PE Guida alla manutenzione e all'assistenza$

Atlas Copco

Atlas Copco TEX150PE Guida alla manutenzione e all'assistenza

Atlas Copco

Atlas Copco RTP2600-HR25 Foglio di istruzioni

Atlas Copco

Atlas Copco EP 19PTX450 HR20-RE Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale

Atlas Copco smartHEAD Manuale utente

Manuali Utensili elettrici popolari di altre marche