ATS J2200 Manuale utente
ATA J2200-VoIP GATWAY User’s Manual
User’s Manual
for the
ATS J2200
For use with Internet Phone service by SunRocket
To enjoy all the benefits of this product, please review the
information contained in this manual
ATA J2200-VoIP GATWAY User’s Manual
Introduction....................................................................................................................................................4
Hardware Overview...................................................................................................................................4
Software Overview ....................................................................................................................................4
IVR Interface for The ATS J2200X ..............................................................................................................5
Quick Guide of ATA Network setup automatically......................................................................................7
ATA Network Setup Automatically Step By Step ........................................................................................8
Ethernet Adapter Detection .......................................................................................................................9
The Detection of the Network Environment ...........................................................................................10
DHCP User Network Environment: ........................................................................................................11
PPPoE User Network Environment:........................................................................................................12
Fix IP User Network Environment:.........................................................................................................13
To Test J2200X Network Settings:..........................................................................................................14
The Network Settings of J2200X was unsuccessful:...............................................................................15
J2200X Reboot ........................................................................................................................................16
The Installation Finished .........................................................................................................................17
Setup the ATS-J2200X by Web Browser....................................................................................................18
System Information .................................................................................................................................18
Single computer environment quick setup ..............................................................................................20
Setting Up the TCP/IP Protocol...............................................................................................................21
General Configuration .............................................................................................................................24
DHCP/Cable Users: .................................................................................................................................24
Fixed IP Users: ........................................................................................................................................24
ADSL Users (PPPoE dial-up connection): ..............................................................................................25
Multiple computers environment quick setup: ........................................................................................27
Phone Book..............................................................................................................................................29
Phone Settings .........................................................................................................................................29
Call Forwarding:......................................................................................................................................29
Volume Settings: .....................................................................................................................................30
Network ...................................................................................................................................................31
SIP Settings..............................................................................................................................................33
System Auth.............................................................................................................................................34
Save Change & Reboot............................................................................................................................35
Update......................................................................................................................................................35
Engineering webpage...................................................................................................................................36
Engineer usage webpage list....................................................................................................................36
Update.htm...............................................................................................................................................36
Natset.htm................................................................................................................................................37
Dmzset.htm..............................................................................................................................................37
Vsset.htm .................................................................................................................................................38
ATA J2200-VoIP GATWAY User’s Manual
Toneset.htm .............................................................................................................................................38
Speakerset.htm.........................................................................................................................................38
Vlanset.htm..............................................................................................................................................39
Setup the ATS-J2200X by using Console (Hyper Terminal)......................................................................40
How to make a phone call ...........................................................................................................................49
Get a FWD account .....................................................................................................................................49
ATA J2200-VoIP GATWAY User’s Manual
Introduction
This user’s manual is for ATS J2200X. It will explain the IVR instruction, web configuration
and command line configuration for the ATS J2200X. Before using the ATS J2200X, some
setup processes are required to make the ATS J2200X work properly. Please refer to the
Setup Menu for further information.
Hardware Overview
The ATS J2200X has the following interfaces for Networking, telephone interface, LED
indication, and power connector.
1.1.1 Two RJ-45 Networking interface, these two interfaces support 10/100Mps Fast
Ethernet. You can connect one RJ-45 Fast Ethernet port to the ADSL or Switch,
and connect the other one to your computer.
1.1.2 One RJ-11 Type analog telephone jack interfaces. You can connect one analog
telephone to the terminal adapter.
1.1.3 LED Indication: There are three LED indicators in the ATA-1000 to show the
Power, Register, and Off-Hook indication.
Software Overview
Network Protocol
SIP v1 (RFC2543), v2(RFC3261)
IP/TCP/UDP/RTP/RTCP
IP/ICMP/ARP/RARP/SNTP
TFTP Client/DHCP Client/ PPPoE Client
Telnet/HTTP Server
DNS Client
NAT/DHCP Server
Codec
G.711: 64k bit/s (PCM)
G.723.1: 6.3k / 5.3k bit/s
G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
G.729A: 8k bit/s (CS-ACELP)
G.729B: adds VAD & CNG to G.729
Voice Quality
VAD: Voice activity detection
CNG: Comfortable noise generator
LEC: Line echo canceller
Packet Loss Compensation
Adaptive Jitter Buffer
Call Function
Call Hold
ATA J2200-VoIP GATWAY User’s Manual
Call Waiting
Call Forward
Caller ID
3-way conference
DTMF Function
In-Band DTMF
Out-of Band DTMF
SIP Info
SIP Server
Registrar Server (three SIP account)
Outbound Proxy
Tone
Ring Tone
Ring Back Tone
Dial Tone
Busy Tone
Programming Tone
Phone Function
Volume Adjustment
Speed dial key
Phone book
Flash
IP Assignment
Static IP
DHCP
PPPoE
Security
HTTP 1.1 basic/digest authentication for Web setup
MD5 for SIP authentication (RFC2069/ RFC 2617)
QoS
ToS field
NAT Traversal
STUN
Configuration
Web Browser
Console/Telnet
IVR/Keypad
Firmware Upgrade
TFTP
Console
HTTP
IVR Interface for The ATS J2200X
You can use the PSTN phone to configure the ATS J2200X. Please follow the instruction to
configure your terminal adapter.
ATA J2200-VoIP GATWAY User’s Manual
Group IVR Action IVR Menu Parameter (s) Notes
Function Reboot #195# None After you hear “Option Successful,”
hang-up. The system will reboot
automatically.
Function Factory Reset #198# None System will automatically Reboot.
WARNING: ALL
“User-Changeable” NONDEFAULT
SETTINGS WILL BE LOST! This
will include network and service
provider data.
Info Check IP Address #120# None IVR will announce the current IP
address of the ATA-1000
Info Check IP Type #121# None IVR will announce if DHCP in
enabled or disabled.
Info Check Phone Number #122# None IVR will announce current in use
VoIP number
Info Check Network Mask #123# None IVR will announce the current
network mask of the ATA-1000.
Info Check Gateway IP
Address
#124# None IVR will announce the current
gateway IP address of the
ATA-1000.
Info Check Primary DNS
Server Setting
#125# None IVR will announce the current
setting in the Primary DNS field.
Info Check Firmware Version #128# None IVR will announce the version of
the firmware running on the
ATA-1000.
Setting Set DHCP client #111# None The system will change to DHCP
Client type.
Setting Set Static IP Address #112xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
DHCP will be disabled and system
will change to the Static IP type.
Setting Set Network Mask #113xxx*xxx*xxx*xxx# Enter value using numbers on the
telephone key pad. Use the * (star)
key when entering a decimal point.
Must set Static IP first.
Setting Set Gateway IP Address #114xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Primary DNS Server #115xxx*xxx*xxx*xxx# Enter IP address using numbers on
the telephone key pad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Codec #130+[1-8]# 1:G.711 u-Law, 2: G.711 a-Law, 3:
G.723.1, 4: G.729a, 5: G.726 16K,
6: G.726 24K, 7: G.726 32K, 8:
G.726 40K,
You can set the codec you want to
the first priority.
Setting Set Handset Gain #131+[00~15]# Handset Gain from 0~15 You can set the Handset gain to
proper value, default is 6.
Setting Set Handset Volume #132+[00~12]# Handset Volume from 0~12 You can set the Handset volume to
proper value, default is 10.
ATA J2200-VoIP GATWAY User’s Manual
Quick Guide of ATA Network setup automatically
You can enjoy the ATA free and relaxed with connect network. You just connect it by following
step, you do talk to anybody with the ATA.
Refer to the Connection Graph above; connect ATS-J2200X with your personal computers and
telephone:
Connect your modem and WAN port of ATS-J2200X with network cable.
Connect your computer and LAN/PC port of ATS-J2200X with network cable
Connect your telephone cable to the phone port of ATS-J2200X.
Connect the power cord to ATS-J2200X power port.
According to the connection with ATS-J2200X will be installed network setting automatically
ATA J2200-VoIP GATWAY User’s Manual
until put on the CD-ROM. The installation will lead you set up the Ethernet by step
automatically.
Step1: To make sure the connection between your computer with the ATA Box.
Step2: Put the installed CD-ROM into the computer CD-ROM drive.
Step3: The installation will be implemented automatically.
Step4: Just wait about 3~5 minutes until the ATS-J2200X set up ready. It has to take so much
time while you set up the ATS-J2200X at first time, Please hold on a minute.
Step5: After the ATA finished setting network condition, the ATA will reboot and download the
web configure file by itself automatically. You will see the REG LED ON then you can
pick the phone up and enjoy your calling with the ATA. And the computer will be working
well by installing automatically.
ATA Network Setup Automatically Step By Step
While user put on the CD-ROM and auto run by drive, the information page will show on your
screen step by step.
ATA J2200-VoIP GATWAY User’s Manual
Ethernet Adapter Detection
The installation will check out your computer Ethernet adapter first if you have more than one
piece of Ethernet adapters. If you have two Ethernet adapters at least, you have to select the
Ethernet adapter you would like to work with internet. Otherwise you will skip this step of
installation.
ATA J2200-VoIP GATWAY User’s Manual
The Detection of the Network Environment
The installation is detecting the network environment with J2200X what network type is.
Please wait…
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
