Integrated Access Controller – Installaon manual
All rights reserved. © AAT HOLDING S.A. 9
To add card user (Method 3)
Add a series cards users – Block Enrollment
The card number must be consecutive.
(This operation is only for Zone 1)
1 0 User ID number # Card number #
Card quantity #
Card quantity is between 1-2000.
(EM Card, the first 10 digits card number or last 8 digits
card number on the card)
To delete a card user by card
Note: Users can be deleted continuously without
exiting from programming mode
2 0 Read Card #
The devices can automatically identify the card of Zone
1 or Zone 2
To delete a card user by user ID
This option can be used when a user has lost
their card
2 0 User ID number #
To delete a card user by Card number 2 0 Card number #
Users can be deleted continuously without exiting from
programming mode
Card and PIN mode (3 1 1 # for Zone 1 or 3 2 1 # for Zone 2)
To Add a card and PIN user
(The PIN is any 4~8 digits between 0000 &
99999999 with the exception of 1234 which is
reserved.)
Add the card as for a card user
Press * to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a PIN in card and PIN mode (Method
1) Note that this is done outside programming
mode so the user can undertake this themselves
* Read Card Old PIN # New PIN #
New PIN #
To change a PIN in card and PIN mode (Method
2)
Note that this is done outside programming
mode so the user can undertake this themselves
* User ID number # Old PIN # New PIN #
New PIN #
To delete a Card and PIN user just delete the
card
2 0 Read Card # or
2 0 User ID number #
Card ONLY mode (3 1 0 # for Zone 1 or 3 2 0 # for Zone 2)
To Add and Delete a card user The operating is the same as adding and deleting a
card user in Card or PIN Mode
To delete All users
To delete All users
Note that this is a dangerous option so use with
care
2 0 0000 #
2 1 0000 # Delete ALL users of Zone 1
2 2 0000 # Delete ALL users of Zone 2
To set card users by Manager card (This operation is only for Zone 1)
To add Card User by Manager Add Card Manager add card Read user card Manager add card
Cards can be added continuously.
To delete Card User by Manager Delete Card Manager delete card Read user card Manager delete
card
Cards can be deleted continuously.
To unlock the door
For a PIN user Enter the PIN then press #
For a card User Read card
For a card and PIN user Read card then enter PIN #
