Attop W70 Manuale utente
W70 Instructions For Use
(Please keep and read this manual carefully before using this product.)
4
Customer Service Email: attop@afterservice.vip
www.attoptoys.com
Get 24/7 assistance at
Use camera or QR scanner to scan
Or Visit: https://attop.afterservice.vip
-01-
1. Please read this Disclaimer & Warning and Safety Guidelines carefully
before using our product. This product is not recommended for people
under the age of 14. By using this product, you hereby agree to this
disclaimer and signify that you have read it fully. You agree that you are
responsible for your own conduct and any damage caused while using this
product, and its consequences. You agree to use this product only for
purposes that are proper and in accordance with local regulations, terms
and all applicable policies and guidelines ATTOP may make available.
2. When using this product, please be sure to strictly abide by the specica-
tion requirements and safety guidelines stated in this document. Any
personal injury property damage, legal disputes and all other adverse
events caused by the violation of the safety instructions or due to any other
factor, WILL NOT be ATTOP’s responsibility.
DISCLAIMER & WARNING
SAFETY GUIDELINES
Check Before Using:
① This product is a high precision drone that integrates various electronic
stability and control mechanisms. Please be sure to set up this drone
carefully and correctly to ensure safe and accident-free operation.
② Please be sure that the batteries of the drone and controller are clean,
undamaged and fully charged.
③ Please be sure that all the propellers are undamaged and installed in the
correct orientation.
④Please do a thorough check of the product before using. Inspect the
integrity of the parts, any signs of cracks and wear of the propeller, battery
power and eectiveness of the indicator, etc. After doing a complete check,
if any issue is found, please stop using the product until the issue has been
solved.
-02-
Flight Environment:
Fly in Open Areas Maintain Line
of Sight
Fly Below
390 feet (120 m)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
① Avoid ying over or near obstacles, crowds, high voltage power lines,
trees, South Pole, North Pole and base station.
② DO NOT y near strong electromagnetic sources such as power lines and
base stations as it may aect the onboard compass.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
③ Don’t use this drone in adverse weather conditions such as rain, snow,
fog, and wind.
-03-
Operation Requirements：
①Please don’t use this product to follow any moving vehicles.
②During the ight, only turn o the motor in case of an emergency.
③As battery becomes low, return the drone back to your starting point.
④This product should not be used while drinking alcohol, if you are
feeling fatigued, taking medicine, or feeling any physical discomfort.
⑤Beware of the noise volume the drone produces. Keep your distance to
avoid ear damage.
Use of Battery:
Use of Gimbal:
①Do not charge the battery at low temperature (lower than 50°F).
②Do not operate the drone at low temperature (lower than 50°F).
③Please ensure batteries are tted in the correct orientation as shown in
the instruction manual.
④Avoid short circuits by tting the batteries incorrectly, and do not crush
or squeeze the batteries as this could carry the risk of an explosion.
⑤Do not mix new and old batteries as this can lead to a poor performance
of the product.
①The Gimbal is detecting about 10 seconds after compass calibration.
When the Gimbal indicator light is solid on, it indicates that the detection
completes.
②Do not touch the Gimbal.
③If the Gimbal gets stuck 5 times or more, it will be out of running and the
Gimbal indicator light will be solid on. Please reboot the drone.
⑥Stay away from the
rotating propellers and
motors.
⑦Don’t y in the
No-Fly Zone.
⑧Don’t touch the
Gimbal.
-04-
⑥Dispose of used batteries carefully. Do not litter.
⑦Please keep dead batteries away from heat and re.
⑧If the device is not going to be used for an extended period of time,
remove batteries to prevent potential damage from battery leakage.
⑨It is recommended to only use the USB charging cable that comes with
the drone to charge the battery.
⑩Don't connect the battery directly to wall outlets or carcigarette lighter
sockets.
Don't attempt to disassemble or modify the battery in any way.
Don't use the battery if it gives o an odor, generates heat, becomes
discolored or deformed, or appears abnormal in any way. If the battery is in
use or being charged, remove it from the device or charger immediately
and discontinue use.
Don't pierce the battery casing with a nail or other sharp object, break it
with a hammer, or step on it!
Always charge the batteries in a reproof container and away from
combustible materials. Don't charge the batteries on surfaces that can
catch re. This includes: wood, cloth, carpet, or in the application's device.
Don't immerse the battery in water or allow it to get wet.
Don’t solder battery terminal directly.
Keep the battery out of the reach of children or pets.
Don't short-circuit the battery by connecting wires or other metal
objects to the positive(+) and negative(-) terminals.
11
12
13
14
15
16
17
18
Li-Po Battery Disposal & Recycling
Lithium-polymer batteries must not be placed with household trash.
Please contact local environmental or waste agency or the supplier
of your model or your nearest Li-Po battery recycling center.
-05-
×1 ×1 ×2
×8 ×1 ×1
MAINTENANCE
①Clean the product after using with a clean and soft cloth.
②Avoid prolonged exposure to direct sunlight and avoid buildup of heat
on the drone.
③ This device is not waterproof and must not be submerged in water
under any circumstance. Failure to maintain the device completely dry will
result in the failure of the unit.
④Check the charging plug and other accessories for signs of damage
frequently. If any part of the device is damaged, refrain from ying until
maintenance can be carried out.
Drone Controller Drone Battery
Propeller USB Charging
Cable Screwdriver
PACKAGE CONTENTS
-06-
DRONE’S DETAILS
TOP
BOTTOM
Lights
Vision Positioning Lens
Battery
Propeller B
Propeller B
Propeller A
Propeller A
HD Camera
Power Switch
-07-
TOP
BACK
FRONT
CONTROLLER DETAILS
Controller Functions
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Gyroscope calibration
Return to Home
Right Joystick
Left Joystick
Unlock
Speed
Antenna
Phone Holder
Camera Angle
Adjustment
Follow me Switch
Record Video
Take Photos
Charge
+
-
CHA
+
-
+
-
-08-
•Return to Home
Press the button to start the RTH. The controller emits a “beep-beep”
sound every 1.5 seconds as the drone ies back to the recorded Home
Point.
Press the RTH button again to exit RTH procedure and regain control of
the drone.
•Photo/Video
•Speed Switch
Press the button “ ” on the Controller and you will hear a “beep”,
indicating the drone is at low speed.
Press the button “ ” again and you will hear two beeps, indicating the
drone is at high speed.
•Follow me Switch
•Unlock/Lock
Press the button and the camera icon “ ” on the Controller, the
camera takes one photo.
Press the same button, the video icon “ ” on the Controller, the
camera will take the video. Press again will exit shooting.
When the Follow Me function is enabled, the drone will follow the GPS
in your smart phone to follow you wherever you go.
Low speed is the default setting.
Press the button ” “ then the motor will rotate.
Pull the Left Joystick to the bottom position. The motor will stop rotating
and the drone will be locked.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-10-
INSTALLATION
Installation: Push the battery into the battery compartment of the drone.
Make sure it “clicks”into place indicating the battery is rmly installed.
Attention:
The battery should be installed rmly. Failure to do so may aect the ight
safety of your drone. The drone may crash due to a power-cut during ight.
Removal: As shown above, press and hold the locks on both sides of the
battery at the same time to remove the battery.
Drone Battery
Indice
Altri manuali Attop Quadricottero
