AUDAC NPM200 Manuale utente
Hardware Manual
NPM200
audac.eu
NPM200 - Quick Start Manual NPM200 - Quick Start Manual02
ADDITIONAL INFORMATION
This manual is put together with much care, and is as complete as could be on the publication date.
However, updates on the specications, functionality or software may have occurred since publication.
To obtain the latest version of both manual and software, please visit the Audac website @ audac.eu.
NPM200 - Quick Start Manual 03
Table of contents
Introduction 05
DanteTM/AES67-enabled PoE paging console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
Precautions 06
Chapter 1 08
Connections and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
Network settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
Chapter 2 10
Overview front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Front panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Overview rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rear panel description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 3 13
Quick start guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Technical specications 14
Notes 15
NPM200 - Quick Start Manual NPM200 - Quick Start Manual04
NPM200 - Quick Start Manual 05
Introduction
The NPM200 is a Dante™/AES67-enabled PoE paging console that lets you make announcements and
send commands over the network to trigger functions. With Power over Ethernet (PoE) technology, this
console can be easily connected to your network without the need for additional power cables, making
it the perfect solution for busy ofces and other professional environments. Featuring a user-friendly
interface and intuitive controls on a 3.5” touchscreen, the NPM200 allows you to easily manage audio
paging and messaging. You can create and transmit pre-recorded messages or use the console’s XLR
input to make announcements in real time.
Networked audio in- & output wall panels
Phantom
XLR inputs
1 x input
WaveTune™
Gain
Dante™outputs
4 x outputs
Chime input
Touch interface
Message input
Touch interface
Dante™inputs
4 x inputs
Daisy chain bypass
Volume
Volume
Mixer
Input processing zone processing
Input processing Zone processing
Daisy chain bypass
NPM200 - Quick Start Manual NPM200 - Quick Start Manual06
Precautions
READ FOLLOWING INSTRUCTIONS FOR YOUR OWN SAFETY
ALWAYS KEEP THESE INSTRUCTIONS. NEVER THROW THEM AWAY
ALWAYS HANDLE THIS UNIT WITH CARE
HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
NEVER EXPOSE THIS EQUIPMENT TO RAIN, MOISTURE, ANY DRIPPING OR SPLASHING LIQUID. AND NEVER PLACE AN
OBJECT FILLED WITH LIQUID ON TOP OF THIS DEVICE
NO NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES, SHOULD BE PLACED ON THE APPARATUS
DO NOT PLACE THIS UNIT IN AN ENCLOSED ENVIRONMENT SUCH AS A BOOKSHELF OR CLOSET. ENSURE THERE IS
ADEQUATE VENTILATION TO COOL THE UNIT. DO NOT BLOCK THE VENTILATION OPENINGS.
DO NOT STICK ANY OBJECTS THROUGH THE VENTILATION OPENINGS.
DO NOT INSTALL THIS UNIT NEAR ANY HEAT SOURCES SUCH AS RADIATORS OR OTHER APPARATUS THAT PRODUCE
HEAT
DO NOT PLACE THIS UNIT IN ENVIRONMENTS WHICH CONTAIN HIGH LEVELS OF DUST, HEAT, MOISTURE OR VIBRATION
THIS UNIT IS DEVELOPED FOR INDOOR USE ONLY. DO NOT USE IT OUTDOORS
PLACE THE UNIT ON A STABLE BASE OR MOUNT IT IN A STABLE RACK
ONLY USE ATTACHMENTS & ACCESSORIES SPECIFIED BY THE MANUFACTURER
UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME
ONLY CONNECT THIS UNIT TO A MAINS SOCKET OUTLET WITH PROTECTIVE EARTHING CONNECTION
USE THE APPARATUS ONLY IN MODERATE CLIMATES
CAUTION - SERVICING
This product contains no user serviceable parts. Refer all servicing to qualied service
personnel. Do not perform any servicing (unless you are qualied to)
EC DECLARATION OF CONFORMITY
This product conforms to all the essential requirements and further relevant
specications described in following directives: 2014/30/EU (EMC) and 2014/35/EU (LVD).
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
The WEEE marking indicates that this product should not be disposed with regular
household waste at the end of its life cycle. This regulation is created to prevent any
possible harm to the environment or human health.
This product is developed and manufactured with high quality materials and
components which can be recycled and/or reused. Please dispose this product at
your local collection point or recycling centre for electrical and electronic waste. This
will make sure that it will be recycled in an environmentally friendly manner, and will
help to protect the environment in which we all live.
NPM200 - Quick Start Manual 07
NPM200 - Quick Start Manual NPM200 - Quick Start Manual08
RJ45 (Network, PoE)
Network connections
Ethernet (POE):
Used for connecting the NWP series in your Ethernet network with PoE (power over Ethernet). The NWP
series complies with the IEEE 802.3 af/at standard, which allows IP-based terminals to receive power, in
parallel to data, over the existing CAT-5 Ethernet infrastructure without the need to make any modi-
cations in it.
PoE integrates data and power on the same wires, it keeps the structured cabling safe and does not
interfere with concurrent network operation. PoE delivers 48v of DC power over unshielded twisted-pair
wiring for terminals consuming less than 13 watts of power.
The maximum output power is depending on the power delivered by the network infrastructure. In
case the network infrastructure is not capable of delivering sufcient power, use a PoE injector to the
NWP series.
While CAT5E network cable infrastructure is sufcient for handling the required bandwidth, it is recom-
mended to upgrade the network cabling to CAT6A or better cabling to achieve the best possible thermal
and power efciency throughout the system when drawing higher powers over PoE.
Chapter 1
CONNECTION STANDARDS
The in- and output connections for AUDAC audio equipment are performed according to
international wiring standards for professional audio equipment.
XLR
For balanced microphone input connections
Connections
Pin 1 White-Orange
Pin 2 Orange
Pin 3 White-Green
Pin 4 Blue
Pin 5 White-Blue
Pin 6 Green
Pin 7 White-Brown
Pin 8 Brown
PIN 1:
PIN 2:
PIN 3:
Ground
Signal +
Signal -
NPM200 - Quick Start Manual 0909
Network settings
STANDARD NETWORK SETTINGS
DHCP: ON
IP Address: Depending on DHCP
Subnet Mask: 255.255.255.0 (Depending on DHCP)
Gateway: 192.168.0.253 (Depending on DHCP)
DNS 1: 8.8.4.4 (Depending on DHCP)
DNS 2: 8.8.8.8 (Depending on DHCP)
NPM200 - Quick Start Manual NPM200 - Quick Start Manual010
Chapter 2
Overview front panel
Front panel description
The front panel of the NPM200 is nished with elegant front panel glass with die-cast metal body
construction features a PTT button with visual LED feedback, a 3.5” fully exible and congurable
touchscreen, and an XLR input that allows the use of various microphones with provided 48V phantom
power.
Push to Talk (PTT) Button
After the desired zone, zones, or group is selected from the touchscreen, announcements
can be made either by pressing and holding the Push to talk’ button or by using the button
as a toggle switch. When the ows are occupied by another paging station (orange LED
blinking), no announcements can be made.
3.5” Touchscreen
With a 3.5” touchscreen, the NPM200 allows you to easily manage audio paging, messaging,
and Trigger commands for 3rd party equipment. The content of the touchscreen is fully
exible and congurable using AUDAC Touch™. In addition, any function on NPM200 can
be controlled and triggered from AUDAC Touch™.
XLR Input for Microphone
An XLR input that allows the use of various microphones with 48V phantom power.
Microphone input can be tailored by using integrated WaveTune™.
Push to talk (PTT) button
with visual LED feedback
3.5” touchscreen
XLR input for microphone
Indice
Altri manuali AUDAC Microfono
AUDAC
AUDAC M86 Manuale utente
AUDAC
AUDAC CMX705 Manuale utente
AUDAC
AUDAC APM Series Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC APM101MK2 Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC PDM200 Manuale utente
AUDAC
AUDAC CMX220 Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC CMX200 Istruzioni per l'installazione e il funzionamento
AUDAC
AUDAC M66 Manuale utente
AUDAC
AUDAC mpx Manuale utente
AUDAC
AUDAC CMX725 Manuale utente
