Audio-Opus Opus#11 Manuale utente
INSTRUCTION
BOOK
| CONTENTS
Ⅰ. Essential Information to Get You Started
Components ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 02
Names and functions ••••••••••••••••••••••••••••••••••••••••••••••••• 03
Power supply management and charging ••••••••••••••••••••••••••••• 04
Ⅱ. Using
USB DAC player/application introduction •••••••••••••••••••••••••••••• 05
Connecting phone and listening to Hi-Res music •••••••••••••••••••••••• 06
PC driver installation and instructions ••••••••••••••••••••••••••••••••• 07
Ⅲ. Others Information
General specifications •••••••••••••••••••••••••••••••••••••••••••••••• 09
Safety measures and escape clauses •••••••••••••••••••••••••••••••••• 10
Fault detection prior to A/S request ••••••••••••••••••••••••••••••••••• 11
A/S request and customer service ••••••••••••••••••••••••••••••••••••• 12
| Components
Understanding the product before use / 02
※ Components may be changed without a prior notice for further performance
and quality improvement. Actual product may differ from images shown.
USB DAC
Headphone Amplifier
Opus#11
USB A to MICRO B (160mm)
(For USB Camera Adapter
connection)
GelPad(Anti Slip)
Apple iPad Lightning
to USB Camera Adaptor
(Sold separately)
USB Micro B to Micro B
(50mm) for Android
USB Cable (1.2M)
Charging & PC Connection
Adapter DC 5V 1.5A
(Sold separately)
CHARGE
BAT. / CONNECT
User Guide
Warranty Card
User QUICK Guide Book
CHARGE
BAT. / CONNECT
| Names and functions
Essential Information to Get You Started / 03
USB 2.0 IN
(MICRO 5PIN)
Charge indicator
Charging : Red
Finished : LED off
DC JACK-IN
(5V/1.5A)
EARPHONE-OUT
(3.5pie)
Battery capacity indicator and
USB connection status indicator
Battery capacity color indicator
Over 50% : Blue
49%~20% : Purple
19%~5% : Red
Less than 5% : Blink, Red
LED will blink for 3 seconds
to indicate USB connection is on
| Power supply management and charging
※ Caution! [Power supply management and charging]
1. Use only the provided USB cable or another generally used 5V/1.5A cable for
carging. Connecting any other USB cable may prevent proper connection,
lead to malfunctioning or decrease charging effectiveness.
2. Charge the product with USB cable connected to the back USB port of PC.
Connecting to a front low-power USB port, USB hub or charging when computer
goes into standby mode may result in insufficient charging due to unstable
power supply.
3. Recharge battery if product was not used for a long time, before initial use
4. Internal battery performance may declined with age depending on number of
discharge/recharge procedures.
5. Avoid charging with a portable charger inside bag or any other closed space
to prevent excessive heat generation and to ensure safe charging.
∙Connecting and charging
1. Use Micro USB cable provided to connect device with PC to charge or 5V/1.5A
adaptor plugged in DC JACK-IN.
- Charge LED will turn red when charging and when charging is complete it will
automatically be turned on.
(Battery capacity is not indicated during charging.)
(Note: It takes 4 hours when charging through USB port. 2.5 hours will take to charge with 5V/1.5A.)
2. To turn product on simply plug in earphone into Earphone terminal.
To prevent unnecessary battery consumption do not leave earphones plugged in.
Essential Information to Get You Started / 04
PC
CHARGE
BAT. / CONNECT
OPUS#11 AC
CHARGE
BAT. / CONNECT
OPUS#11
or
| Power management and charging the device
∙USB DAC player/application introduction
※ Caution! You must install and use the USB DAC application among those listed
below to ensure high quality Hi-Res audio files playback.
Android: USB Audio Player Pro (Purchase at Google Store)
Onkyo HF Player (Purchase at Google Store)
Neutron Music Player (Purchase at Google Store)
iphone: Hibiki (Purchase at iTunes App Store)
Onkyo HF Player (Purchase at iTunes App Store)
Neutron Music Player (Purchase at iTunes App Store)
Using / 05
Onkyo HF PlayerUSB Audio Player PRO
Hibiki
NEUTRON MUSIC PLAYER
Using / 06
| Connecting phone and listening to Hi-Res music
1. Connect provided USB cable (50 mm) to a smartphone USB port (5 pin).
2. The power will be turned on automatically when earphones are connected to the product.
(CONNECT LED will blink for 5 sec.)
3. After starting purchased from App store application select and play music file.
1. Connect provided USB cable (160 mm) with a Lightning to USB Camera Adapter
(sold separately) and plug into iPhone USB jack.
2. The power will be turned on automatically when earphones are connected to the product.
(CONNECT LED will blink for 5 sec.)
3. After starting purchased from App store application select and play music file.
CHARGE
BAT. / CONNECT
CHARGE
BAT. / CONNECT
※ Caution!
The volume up/down function is absent in this product.
Utilize embedded volume control function in player application.
When playing DSD file, depending on player application there might be a noise
occurrence if not played in max volume.
If no sound observed in playing mode, shut down application and restart it.
∙Android OS smartphones
∙iPhone
※ Refer to the app store or application homepage for detailed information.
| PC driver installation
※ Download and install driver (TheBIT_DriverSetup_v3.34.0.exe for Windows OS
from www.audio-opus.com to operate the product from PC.
Turn the power on by plugging earphone or headphone into earphone port when
connecting the product with PC for installation.
Using / 07
1. Double click the TheBIT_DriverSetup_v3.
34.0.exe for installation.
2. After selecting installation folder (option)
click ‘Install’ button.
3. Click ‘Install’ button and install the driver.
4. After preinstallation process click ‘Next’ button.
5. Complete installation by connecting PC with
device using USB cable. It will take some time
depending on PC environment.
6. Click ‘Finish’ button and complete installation.
| PC driver installation and instructions
Using / 08
※ Connect the device with PC through USB cable, check for driver availability as
depicted below in Device Manager menu (Control panel > System and security >
System > Device Manager). In case the driver is not installed properly follow next
instructions.
1. Check if power supply is on (Earphones/headphones must be plugged in for automatic switch on).
2. Connect the device with PC in power on condition and check for connection.
3. If driver is not installed properly after completing above mentioned steps,
delete the program completely and run installation again.
4. When driver is installed properly select the device as default in ‘Sound settings’
(Control panel > Hardware and sound > Sound) by clicking the right mouse button
and selecting as a default.
| General specifications
Body Material[Design]
Dimensions[mm]
Weight
Battery Capacity
Playing Time
CPU
DAC
OUTPUT IMPEDENCE
OUTPUT LEVEL
S/N Ratio
CROSS TALK
THD+N
FREQUENCY RESPONSE
USB Input Interface
Supported Audio Formats
(T.B.D)
I/O
LED INDICATE
Supported O/S
[t.b.d]
Accessory
(Package)
Aluminium[Slim] 7.9T
56 x 103 x 7.9T
83g
1,400mAh / 3.7V
8.5Hr
XS1-U8A-64 (XMOS)
Sabre32 ES9018K2M (32bit DAC)
1.2 ohm
2.1Vrms(No Load)
118dB @ 1kHz
133dB @ 1KHz
0.005% @ 1kHz
20Hz~20KHz (0.4dB)
USB AUDIO 2.0 / 1.0 , asyncchronous
PCM : up to 32bit / 384KHz PCM
DSD : Native DSD
DSD over PCM(DoP)
DSD64 (2.8224MHz), DSD128 (5.6448MHz)
DXD(24Bit/352.8KHz)
Sample rate: 44.1KHz, 48KHz, 88.2KHz,96KHz,176.4KHz,
192KHz, 358.2KHz, 384KHz
USB 2.0 IN (MICRO 5PIN)
DC JACK-IN (5V/1.5A)
EARPHONE-OUT (3.5pie)
LED1: CHARGE LED
LED2: BATTERY LEVEL / USB CONNECTION
Windows XP/Vista/ 7/8.1
Mac OS x10.6.4 or later
Android(4.4 or above)
iOS7/8/9
USB Micro B to Micro B (50mm)
USB A to MICRO B (160mm)
USB Cable (1.2M) : Charging & PC Connection
Apple iPad Lightning to USB Camera Adaptor(Optional)
General Specifications
Other Information / 09
Indice
