5
Warnings
To prevent re, or shock hazard, do not
expose your CD6 to rain or moisture.
Do not place objects containing
water on top of this unit.
This unit contains voltages which can cause
serious injury or death. Do not operate with
cover removed. Refer servicing to your
authorized Audio Research dealer or other
qualied personnel.
The detachable power cord on your CD6 is
equipped with a heavy gauge, 3-conductor
cable and a standard three-prong
grounding plug. For absolute protection,
do not defeat the ground power plug. This
provides power line grounding of the CD6
chassis to provide absolute protection from
electrical shock.
For continued protection against re hazard,
replace the fuse only with the same type
and rating as specied at the fuse holder.
Do not operate the CD6 player without the
supplied CD6 clamp installed on the CD.
Gently place clamp on disc to prevent
damaging the spindle mechanism.
Whenever the CD6 power is on, the door
covering the drive mechanism/tray area
should remain fully closed after inserting or
removing a CD. Following this procedure
will maintain proper ventilation and also
minimize dust intrusion on the lens and
drive mechanism.
If the unit is to be operated in an enclosure
such as an equipment rack, make certain
that adequate airow above and to each
side of the unit is provided, and ensure that
the ventilation fans on the back panel are
not obstructed.
The appliance coupler at the rear of this unit
must be accessible for emergency power
disconnect.
This unit is RoHS compliant.
A note about packaging...
Save all packaging in a dry place away
from re hazard. Your CD6 compact disc
player is a precision electronic instrument
and should be properly cartoned any
time shipment is made. You may not
have occasion to return your unit to the
factory for service, but if that should prove
necessary, or other occasion requiring
shipment occurs, the original packaging
will protect your CD6 from unnecessary
damage or delay.
