AudioCodes MediaPack MP-262 Manuale utente

2. Cabling

The basic cabling of your gateway is illustrated below:

Use only the supplied 12VDC +/-10%, tolerance, 2A, limited power source wall mount Class II power supply adapter.

Before connecting the gateway to power, ensure that the VAC ratings match, and that you have read the Compliance and

Regulatory Information at www.audiocodes.com/library.

AudioCodes MediaPack™Multimedia Home Gateway

MP-262 Quick Guide

1. Connect the gateway to the Internet using one of the following

connectivity methods:

WAN Ethernet: Connect the WAN Ethernet port, labeled

LAN 4/WAN to an external modem, using a CAT 5 Ethernet

cable.

xDSL: Connect the xDSL port, labeled xDSL to the telephone

socket, using an RJ-11 telephone cable.

2. Connect the Ethernet ports, labeled LAN 1-4 to your LAN

computers, using CAT 5 Ethernet cables.

3. Connect the telephone ports, labeled Phone 1-2 to analog

telephones, using RJ-11 telephone cables.

4. Connect the gateway to a standard 110/220 VAC electrical wall

outlet, using the supplied AC/DC power adapter.

5. When powered on, the gateway's Status LED turns on. When

initialization completes (~ 2 min.), the LED changes from red to

green. If the gateway is off, press the Power button located on

the rear panel to switch it on.

For wall mounting the gateway, refer to the User's

Manual.

Welcome

Thank you for purchasing AudioCodes MediaPack

Multimedia Home Gateway!

This Quick Guide describes the installation for AudioCodes

MediaPack 262 model (MP-262).

1. Before Installing

Make sure that the shipped package contains the following items:

MediaPack Multimedia Home Gateway

1 x RJ-45 Ethernet cable

1 x RJ-11 cable for telephone or xDSL

12V AC/DC power adaptor (use only supplied)

If any item is missing, please contact your sales representative.

Notice

Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing

product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can

it accept responsibility for errors or omissions. This document is subject to change without notice. Refer to the current Release

Notes that may be included with your documentation or hardware delivery. Updates to this document as well as software files can

be viewed by registered customers at www.audiocodes.com/downloads.

Date Published: May-28-2013

Document #: LTRT-18681

4. Configuring VoIP Parameters

Before you can make VoIP calls, you need to register with an

Internet Telephony Service Provider (ITSP) and obtain account

and SIP Proxy server information

1. From the menu pane, click Voice Over IP; the 'Voice

Over IP' page appears in the right pane.

2. Click the Line Settings tab, mark check boxes of lines

that are connected to telephones (clear those not

connected), and then click Apply.

3. Click the Edit icon corresponding to the telephone

lines, and then in the 'Line Settings' page, configure the

parameters with values provided by your ISP.

4. Click the Signaling Protocol tab, and then select the 'Use

SIP Proxy' check box. In the 'Proxy IP Address or Host

Name' field, enter the ITSP's proxy server IP address or

host name. Click OK to complete the VoIP configuration.

To verify successful registration with

the proxy

server, ensure that the Phone

LED is lit green or in

the Voice over IP tab (System Monitoring menu), the

entry 'SIP Registration' displays "Registered"

for the

configured lines.

5. Pick up the phone receiver (or handset) and listen for a

dial tone; you're now ready to make a VoIP call.

3. Configuring Network Parameters

1. Open a Web browser, and then enter the following URL

address to access the gateway's embedded Web server

graphical user interface: http://mp262.home

2. Select the Web GUI display language and click Continue.

3. Define a new login username / password and click OK.

4. In the 'Quick Setup' page, select and define the Internet

connection type as instructed by your ITSP, and then

click OK. You are now connected to the Internet and can

proceed to configure VoIP parameters for

making and receiving voice-over-IP calls.

If there is no Internet connection, the Web GUI's

Map View page (Home) displays a red icon after

the globe icon. Consult your ITSP for valid connection

parameters.

The gateway's default wireless (Wi-Fi) network name

(SSID) comprises product name followed by "_" and

the six last characters of the MAC address in capital

letters (secured). For example, if the MAC address is

00:90:8F:2C:64:70, the SSID will be MP262_2C6470

The password is 0<serial number without first two

characters>. For example, if the SN is VT1234567, the

password will be 01234567. The SN is printed on the

rear of the MP-262.

Altri manuali AudioCodes Portale

AudioCodes

AudioCodes MSBG Series Guida rapida

AudioCodes

AudioCodes MediaPack 1 Series Istruzioni per il montaggio

AudioCodes

AudioCodes Mediant 800B Manuale

AudioCodes

AudioCodes Mediant 500L MSBR Istruzioni per il montaggio

AudioCodes

AudioCodes MP-252 Manuale utente

AudioCodes

AudioCodes Media Pack MP-11x Manuale utente

AudioCodes

AudioCodes Mediant 1000 Manuale utente

AudioCodes

AudioCodes Mediant Series Manuale utente

AudioCodes

AudioCodes MediaPack MP-124 Manuale utente

AudioCodes

AudioCodes Mediant 500 Manuale utente

AudioCodes

AudioCodes MediaPack MP-124 Manuale utente

AudioCodes

AudioCodes Mediant Series Guida rapida

AudioCodes

AudioCodes Mediant 3000 Manuale utente

AudioCodes

AudioCodes MediaPack MP-11x Series Manuale utente

AudioCodes

AudioCodes Media Pack MP-124 Manuale utente

AudioCodes

AudioCodes MediaPack 114 Manuale utente

AudioCodes

AudioCodes MP-11 Manuale utente

AudioCodes

AudioCodes Mediant 2000 Manuale utente

AudioCodes

AudioCodes Mediant 800 Series Istruzioni per il montaggio

AudioCodes

AudioCodes MediaPack MP-11x Series Manuale utente

AudioCodes

AudioCodes Mediant 1000 Manuale utente

AudioCodes

AudioCodes Mediant 1000 MSBG Manuale

AudioCodes

AudioCodes Mediant 500L MSBR Manuale utente

AudioCodes

AudioCodes MediaPack MP-402 Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente