Audionet WATT Manuale utente
WATT
Integrated Stereo Amplifier
User’s Manual
2
3
Contents
1!Preface 5!
1.1!Included items 6!
1.2!Transport 6!
2!Overview front panel 7!
3!Overview back panel 8!
4!Installation and power supply 9!
4.1!Placement 9!
4.2!Mains connection 10!
4.3!Orientation of mains plug 11!
5!Inputs and outputs 12!
5.1!Inputs 12!
5.2!Optional phono input 12!
5.3!Speaker terminals 13!
5.4!Preamplifier Output 14!
5.5!Headphones socket 14!
5.6!Audionet Link 14!
5.7!Control connection 15!
6!Usage 16!
6.1!Powering up 16!
6.2!Switching on and off 16!
6.3!Using Audionet Link 17!
6.4!Control elements on the front panel 18!
6.5!Volume control 18!
6.6!Display 19!
6.7!Input selection 20!
6.8!Muting 21!
4
7!Audionet Metal Remote Control 22!
7.1!Key assignment WATT 23!
7.2!Changing the batteries 23!
7.3!Settings for Audionet WATT 24!
8!Setup menu 27!
8.1!Overview setup menu 28!
8.2!Select Input 29!
8.3!Global Setup 29!
8.3.1!Headphones 29!
8.3.2!Display 30!
8.3.3!Balance Left/Right 31!
8.3.4!AutoStart 32!
8.3.5!AutoOff 33!
8.3.6!By-Pass Channel 33!
8.3.7!Phono Card 36!
8.3.8!Serial Port 37!
8.3.9!Channel Name 38!
8.3.10!Volume Offset 38!
8.4!Reset factory defaults 39!
8.5!Device Info 40!
9!Protection system 41!
10!Security advice 42!
11!Technical data 43!
5
1 Preface
The Audionet Scientists Team and its leading scholars congratulate you on your
purchase of this unit, sending cheers directly from our research and development
center.
Audionet components are no marketing products, they are authentic. Conceived
and developed with scientific inspiration, professional engineering expertise and
a deep passion for achieving the truly perfect sound. They are unique creations
designed to inspire musical enjoyment and have an excellent reputation amongst
all connoisseurs throughout the world. Each and every one of our precision-man-
ufactured devices is individually crafted by hand at our new Berlin headquarters.
Built by audiophiles for audiophiles. With the utmost precision and total control
of each and every perceptible detail.
Even if you're an experienced aficionado of ultra-highend components, please
start listening to your new Audionet WATT by reading this manual carefully be-
fore you plug it in. This will ensure you'll enjoy all functions of this unit without
any compromise or potential disruption.
6
1.1 Included items
You will find the following items included:
• The stereo integrated amplifier WATT
• The user's manual (that you are currently reading)
• One standard mains cord
• Audionet Metal Remote Control
1.2 Transport
Important
• Only transport the WATT in the original packaging.
• Always use the provided cloth bag to prevent scratches on the casing.
• Please allow the WATT to adapt to the climatic conditions in your listening
room before you switch the unit on for the first time after the transport.
7
2 Overview front panel
WATT
audionet
Power
Input
Select
Menu
Mute
IR remote
control receiver
Volume
controller
Display
8
3 Overview back panel
1Speaker output right channel
2
Cinch input no. 2, right channel
3
Cinch input no. 3, right channel
4
Cinch input no. 4, right channel (optional Phono)
5
Mains input and fuse compartment
6
Marking mains phase
7
Cinch input no. 2, left channel
8
Cinch input no. 3, left channel
9
Cinch input no. 4, left channel (optional Phono)
10
Speaker output left channel
11 Control input RS232
12 Additional earth connection
13 Preamplifier output PRE OUT, left channel, Cinch
14 Balanced input (XLR) no. 1, left channel
15 Headphones output
16 Balanced input (XLR) no. 1, right channel
17 Preamplifier output PRE OUT, right channel, Cinch
18 Earth connection for phono
19 Audionet Link outputs OUT 1 and OUT 2
ANALOG LEFT
PHASE
MAINS
HEADPHONES
DISCONNECT POWER CORD BEFORE OPENING
ANALOG RIGHT
RIGHT
GND
ENGINEERED AND HANDMADE BY IDEKTRON GMBH & CO. KG, BERLIN, GERMANY
SPEAKER
OUTPUT
GND
SPEAKER
OUTPUT
LEFT
THIS UNIT MUST BE EARTHED
WATT
220-240V / 50-60Hz / 900W MAX.
FUSE T10A
RS232
CONTROL
OUT 1 OUT 2
AUDIONET LINK
IN 1
IN 2
IN 3
IN 4
PRE-OUT
(PHONO)
IN 1
IN 2
IN 3
IN 4
(PHONO)
PRE-OUT
1
0
15
9
8
5
2
3
4
18
1
19
6
13
14
7
12
11
16
17
9
4 Installation and power supply
Important
• During connecting and removing sources or amplifiers to the WATT, all units
of your audio system have to be switched off to prevent damage to the WATT
or any of the other connected units.
• Please make sure that all cables are in absolute best conditions! Broken shields
or short-cut cables could damage the WATT and/or any other units con-
nected.
4.1 Placement
Important
• It is recommended to place the WATT in a high quality rack or onto a stable
table.
• Do not expose the unit to direct sunlight.
• Do not cover the ventilation slots.
• Do not place the WATT in close range to heat sources like radiators.
• Do not place the WATT on top of other units, especially not on top of power
amplifiers, preamplifiers or similar devices that produce heat. Both units could
suffer damage from thermal overload.
• Do not use the unit in places where it is exposed to vibrations.
• Do not place the unit close to loudspeakers or in corners of a room where
it is exposed to high levels of sonic energy, which might reduce the sound
quality of the unit.
10
4.2 Mains connection
The mains input * is on the back panel of the WATT. Use the included mains
cord to connect the unit to mains. If you prefer to use a different power cord,
make sure that it meets the specifications for your home country.
Important
• The electrical specifications of your home country must meet the electrical
specifications printed onto the back panel.
• The WATT is a Class I unit and must be earthed. Please ensure a stable earth
connection. The phase ('hot' pin) is marked on the back panel (PHASE) .
• Never pull the mains plug while the WATT is switched on! Before you pull the
mains cord off its socket at the back panel, power down the unit to stand-by
mode.
The WATT should only be switched off from the mains in cases of extended
absence (like vacations) or if massive trouble on the mains power is to be ex-
pected. Pull the mains plug to completely disconnect the unit from mains.
Tip
• The use of high quality mains cords (e.g. Audionet P10) could improve
the sound quality of your Audionet WATT. Please refer to our website
(www.audionet.de) or ask your local dealer for further information.
*Please refer to section "Overview back panel" on page 8.
Indice
Altri manuali Audionet Amplificatore
Audionet
Audionet SAM V2 Manuale utente
Audionet
Audionet PAM V2 Manuale utente
Audionet
Audionet AMP II G2 Manuale utente
Audionet
Audionet MAP Manuale utente
Audionet
Audionet SAM G2 Manuale utente
Audionet
Audionet PREI G3 Manuale utente
Audionet
Audionet DNA Manuale utente
Audionet
Audionet AMP VII Manuale utente
Audionet
Audionet AMP IV Manuale utente
Audionet
Audionet PRE G2 Manuale utente
Audionet
Audionet SAM 20 SE Manuale utente
Audionet
Audionet SAM G2 Manuale utente
Audionet
Audionet DNA Manuale utente
Audionet
Audionet PRE G2 Manuale utente
Audionet
Audionet PRE Manuale utente
Audionet
Audionet DNA Manuale utente
Audionet
Audionet PRE1 G3 Manuale utente
Audionet
Audionet AMP V Manuale utente
Audionet
Audionet Amp I V2 Manuale utente
Audionet
Audionet HEISENBERG Manuale utente
