Audioplex U-CAT Manuale utente
Route the CAT5 cable to the wall box where the U•CAT is to be mounted. Install an RJ45 plug on
the CAT5 cable using 568B connections.
Plug the CAT5 cable into the jack on the back of each U•CAT and mount them in their wall boxes
using screws provided. Install Decora surround plate.
For best performance, keep wiring as direct as possible, and avoid running it near power or other
signal wiring.
™
™
CAT5 CONNECTIONS
UNIVERSAL RCA TO CAT5 ADAPTOR
The U•CAT is an adaptor plate which allows
most RCA A/V signals, including high
definition video, to be sent over standard CAT5
wiring.
There are four independent circuits on the plates
which can be used for any combination of video
(composite or component) and audio (analog or
digital) signals. A standard RJ45 jack on the rear
allows interconnection between plates.
Plates are sold in pairs, and are the same for
transmit and receive, allowing the plates to be
used for two-way communication.
Transmission distances can be 100 + feet,
depending on signal type and wiring.
™
Connect up to four RCA cables from a source to the
RCA jacks on the U•CAT near the source. See table at
right for suggested colors. Connect monitor or amp to
the appropriate jacks on the other U•CAT .™
Signal Type Colors
Analog Audio Red & Black
Digital Audio Black
Composite Video Green
Component Video Red, Green, Blue
A/V CONNECTIONS
APPLICATIONS
INSTALLATION MANUAL
U CAT• ™
PATENT APPLIED FOR
PATENT APPLIED FOR
Because the four circuits on the U•CAT are not dedicated to any specific signal format, they may
be freely used for any combination of audio or video signals. Use all four circuits for component
video plus digital audio, three circuits for composite video plus stereo (analog) audio, or two
circuits for stereo audio. For component video with stereo audio, use two runs of CAT5 with two
U•CAT plates at each end. Circuits may be used in both directions as well; for instance two-way
composite video with mono audio (2 circuits each way).
For longer runs or in noisy environments, use Audioplex active CAT5 drivers.
™
™
Your Audioplex Technology U•CAT is covered by a LIFETIME warranty against all defects in workmanship
and materials for the original end user. Any defects will be remedied without charge for labor or parts.
Damage incurred during shipping or accident is not considered to be a defect, and not covered by this warranty. If
such incident occurs, you must contact the courier immediately. Audioplex Technology is not responsible for
defective operation caused by misuse or by modification or service by any unauthorized person or agency.
The product must be properly installed and operated according to instructions for the warranty to apply. Any
necessary servicing must be done by Audioplex technology. The products must be returned expenses prepaid (no
call tags will be issued/customer is responsible for shipping of return), with written authorization from the
company. The product must be shipped with proof of purchase and in the original carton and packing material to
avoid damage.
This warranty gives you specific rights. You may have other rights which vary from state to state.
™
WARRANTY
AUDIOPLEX TECHNOLOGY
404 GWH PO BOX 440 MELVIN VILLAGE, NH 03850
7/20/2009
WIRING EXAMPLES
CAT5 Cable
CAT5 Cable
DA Pb Y PrDA Pb Y Pr
V A V A V A V A
DVD Player output
Camera Monitor Monitor Camera
Monitor input
Typical Component Video connection
Two-Way Composite with Audio
PATENT APPLIED FOR © 2009
Indice
Altri manuali Audioplex Adattatore
