August View Istruzioni per il montaggio

Indice

Lingue:

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente

EN

August View Doorbell Cam

Installation Guide and User Manual

Table of Contents | Table des matières

Inside the box

Get to know your August View

Before you begin

Drillbit size chart

Using the wedge

Not using the wedge

Using your August View

Tech and specs / regulatories

À l’intérieur de la boîte

Apprenez à connaître votre August View

Avant que tu commences

Tableau des tailles de foret

En utilisant la cale

Ne pas utiliser la cale

Utiliser votre August View

Tech et spéciications / régulateurs

2

3

5

6

7

11

15

16

19

20

22

23

24

28

32

33

EN |

FR |

1

2

Inside the box

August View Doorbell Cam Mounting Plate

Two (2) AnchorsScrews

Micro-USB Cable

Drill w/ drill bit set Phillips Screwdriver Pen/Pencil

August Indoor Chime

Battery

Wedge

What you need

3

Get to know your August View

Front

Infrared LED

PIR Sensor

Light Indicator

Microphone

Doorbell Button

Night vision camera

Detects infrared motion

Communicates status

Two way audio communication

Touch activated doorbell

Camera

See who’s at your door

LED Light

Removable Faceplate

Indicates power-on

Customize your doorbell

Back

Reset Button

Speakers

Two way audio

Sides

Security Screw

Secure Installation

Mounting PlateWedge

Wedge

Changes the angle of the view

Battery

Removeable and rechargeable

Battery Front Side

USB Connector

Rechargeable battery

Indicator LED

Displays charging status

Battery Top Side

Battery Contacts

4

Get to know your August View’s Accessories

5

Before You Begin

| Set up in the August app irst

| Position the camera where you want it on the wall

• Download the August Home app by visiting http://august.com/app.

• Sign in with your August account, or create one.

• Tap Set up a New Device from the side menu.

• Choose August Doorbell Cam, then August View.

• Name your device and assign it to an August house.

• Follow the instructions to connect your doorbell cam to Wi-Fi.

• Once online, your August View Doorbell Cam is ready to use.

• Recommended position is approximately 48 inches /4 feet (121cm) up from the ground,

near your door.

• You may wish to check your chosen position before mounting to the wall. This can be

done by viewing live video from the doorbell cam in the August app while testing mounting

locations. Make sure the doorbell camera captures the desired area before mounting.

• If needed, the included wedge can be placed between the wall and the doorbell cam to

adjust the horizontal viewing angle.

6

| Before you start drilling, determine your drill bit size

If you’d prefer to have someone come and help you out, we partner with:

Hellotech: https://www.hellotech.com/august

Pro.com: https://pro.com/augusthomes

7

IF USING THE WEDGE (Step 18), otherwise proceed to page 11

1. Mark the location

Using a pencil or other marking device, trace a line on the wall at the bottom of the

wedge to mark the location you’ve selected.

Slide the doorbell upwards from the mounting plate to remove it. There should be

approximately ¼ inch of travel before it stops.

2. Remove the mounting plate

8

3. Mark the holes

4. Drill the holes (if necessary)

Mark in these screw holes

• Align the wedge with your mark on the wall.

•Using a pencil or other marking device, mark the location of the two screw holes in the

wedge.

• Remove the wedge from the wall.

• Some surfaces, like wood and composite siding, may not require drilling holes irst.

You may be able to simply screw in the included screws.

•Refer to the drill bit chart to determine what type of installation is appropriate for

your wall.

9

5. Screw the wedge to the wall

6. Screw mounting plate to the wedge

Attach the wedge to the wall irst, using the included screws into the drilled holes or

anchors as needed.

Using the included smaller machine screws, screw the mounting plate to the wedge.