Aurender S10 Manuale utente

Aurender

Reference Music Player

User Guide

For the online version and latest updates,

visit www.aurender.com

For after service support,

write [email protected]

1716 Pantheon, 21-2 Sunae-dong,, Bundang-ku, Seongnam, Korea Phone: +82 70 8668 0588 Fax: +82 31 728 8537

Table of Contents

Page

Warranty 3

Box Contents 3

Instructions 3

Aurender Positioning 3

Front Panel 4

Rear Panel 4

Quick Start 5

1. Connections 5

2. iPad Application Installation and Set Up 5

3. Selecting the Aurender Music Serve 5

4. Enter Passcode 5

5. Manually Checking for Upgrades 6

6. Setting Time and Language to iPad settings 7

7. Scan all files using the Scanner menu. 7

8. Copying Files to the Aurender 8

Aurender Conductor iPad Application 9

Two Year Warranty

The warranty period for Aurender Digital Audio Players is two years including parts and labor.

The warranty is non-transferable. The Aurender Music Server is automatically registered when it

is logged onto the Internet. Only the serial number, date and IP address are recorded for

warranty purposes.

iPad, Wireless Router, Internet, D/A Converter, Cables

These are necessary in order to use the Aurender Music Server. A wireless router is needed to

connect the iPad to the Aurender Music Server, and an Internet connection is needed to update

the firmware and iPad application. Finally, to convert the digital signal from the Aurender into an

analog signal a D/A Converter is needed.

Box Contents

Aurender Music Server AC Power Cord

Instructions

Please read the instructions carefully before setting up the Aurender Music Server.

1. Be careful not to drop the device to avoid internal damage.

2. Do not disassemble the device.

3. Keep magnetic materials away from Aurender to prevent data damage.

4. Do not expose device to oil, dust, water, high humidity, or smoke.

5. Keep ventilation openings free from obstruction.

6. When cleaning, use only a soft cloth. Keep out of contact with water or other liquids.

7. All servicing must be performed by a qualified technician, or the warranty will be voided.

8. Unplug power cord during severe lightning or when unused for a long period of time.

9. Unplug the device from the outlet only after completely turning off the unit.

10. Always turn the power off before connecting or disconnecting any cables.

Please note that hard drives can break down. It is important to back up your music collection

periodically to a separate memory device. In the event of drive failure, Widealab is not

responsible for any loss of data. The drive manufacturer will only replace faulty drives under

warranty and do not compensate to any loss of data.

Aurender Positioning

1. Place your device on a flat, horizontal, and stable surface.

2. Keep away from heat sources, such as radiators.

3. Do not stack other products on top of the Aurender.

4. Allow space around the device for ventilation.

5. Do not place inside an enclosed cabinet.

Front Panel

1. On/Off - Press to turn on and off. The Aurender can also be turned on and off using

the iPad application. The remote On/Off button is located in the Server Menu under

Settings in the Aurender iPad application. Scroll to the bottom of the Server Menu on

the right to find the On/Off button.

2. Display Menu - Press to cycle through 3 display options:

Song Information and Level Meters

3. Play/Pause - Press to start or stop playback for songs in

Queue.

4. Play Previous - Press once to skip to the previous track for

songs in Queue..

5. Play Next - Press once to skip to the next track for songs in

Queue..

Rear Panel

1. AC Power Switch - Press top to turn on AC power. Press bottom to turn off.

2. AC Power Socket - Connects the AC power cord to a power source/outlet.

3. AES/EBU Output - Connects to the XLR digital input of the digital-to-analog converter.

4. Optical (SPDIF) Output - Connects to the optical input of the the digital-to-analog

converter.

5. Coaxial (SPDIF) Output - Connect to the coaxial input of the the digital-to-analog

converter.

6. USB Output - Use any of the two USB ports for USB output. The USB output and SPDIF

outputs will both output signals at the same time.

7. USB Port - Use any of the two USB ports to copying files from USB memory devices or to

connect an external CD-ROM drive.

8. Gigabit ethernet port - To connect to networks and Network Attached Storage (NAS)

devices.

Warning - Before connecting audio cables, first check to see that all devices are

grounded using grounded plugs and grounded sockets. All devices should be turned

off, before connecting any audio or digital cables. If the devices are not grounded, a

voltage potential difference between devices can cause a voltage surge through the

audio cable that can weaken and eventually damage sensitive circuits in D/A

converters and other devices.

Quick Start

1. Connections

Connect the AC power cord to the AC socket on the rear panel (2) and power main using

grounded sockets and plugs. Do not turn on the power.

Use an Ethernet cable to connect the Ethernet port on the rear panel (7) to the router. The

router should be connected to the Internet and computer, in order to receive updates and

conveniently transfer files.

Select one of the three digital outputs (AES/EBU, optical, coaxial) on the rear panel (3, 4, 5)

and connect it to a DA converter or an amplifier with a digital input.

Always make sure that all devices are grounded before making any connections. This

should be done by connecting the power cords using grounded plugs and grounded sockets.

In addition, all devices should be turned off. If the devices are not grounded, a voltage

potential difference between devices can cause a voltage surge through the digital cable that

can weaken and eventually damage sensitive circuits in D/A converters and other devices.

2. iPad Application Installation and Set Up

Using the iPad, go to the App Store and type Aurender in the search window. Install the

Aurender Conductor application. The Aurender supports WAV, FLAC, Apple Lossless, AIFF,

and APE formats.

3. Selecting the Aurender Music Server

Open the Aurender application and the Aurender Music Server will be shown on

the Server menu. The Aurender must be connected to the Internet and iPad.

Select the Aurender Music Server by tapping its name.

If no server is listed, tap Add Server at the bottom of the window and a window will appear

asking for the IP address. The IP address can be found by pressing the Display Mode button

on the front panel (top left) and keeping it depressed until the front display changes. Release

the button. Find the IP address and enter. To return the display to the normal mode, press

the Display Mode button again.

4. Enter Passcode

Please enter the Passcode shown on the front display of the Aurender.

5. Manually Checking for Upgrades

Check for the newest version of the firmware and Upgrade to the new version, if needed.

After upgrading, the Aurender will reboot automatically. At this time, the iPad application

needs to be closed and restarted in order to be upgraded also.

6. Setting Time and Language to iPad settings

Time and Language can be set by using the menu at the bottom of the Server tab.

Aurender‟s time and language will be set to the iPad time and language settings.

7. Scan all files using the Scanner menu.

Scanning will continue in the background, even when songs are selected and played. Please

note that it can take hours to scan large libraries.

After scanning is done, a pop up window will appear stating that the database is being

downloaded. If the download fails to finish or gets stuck, please move closer to the wireless

router and press Update song database. The time to download the database varies according

to song database size and wireless connection speed between the wireless router and the

iPad. It can be a few seconds or a few minutes.

Note : When new files are added, the Aurender needs to scan the HDD and make a new

database. When the song database is updated after scanning, the iPad needs to download it.

So, even though one song is added to the 50,000 songs database, the iPad needs to

download whole database, but it should take less than a minute.

8. Copying Files to the Aurender

There are three ways to copy files to the Aurender‟s HDD.

1. Use the Ethernet connection to copy files to the Aurender using a PC or Mac.

2. Connect a USB memory to the USB port on the rear panel.

3. Connect a USB CD-ROM drive to the USB port on the rear panel.

PLEASE NOTE: After song files are copied to Aurender, new songs will appear, only after the

files are scanned and the song database transferred to the iPad application. Files will be

scanned automatically one minute after additions or changes to the files.

PC Users

1. Press the Windows + R on your keyboard (START -> RUN).

2. Type in two back slashes (\\) and the IP address of the Aurender. (For example:

\\192.168.1.171). The Aurender IP address can be found in NAS under SETTINGS on the iPad

application.

3. Click OK and a window will appear with a folder labeled „hdd1‟. Open the folder.

4. A popup window will ask for a Username and Password. They can be found in NAS under

SETTINGS in the iPad application.

5. Drag and drop files in to hdd1 or in its sub-folders.

6. Sub-folders may be created, renamed, or deleted. To add a sub-folder, right click on the

white space and go to New -> Folder.

Note: Importing large libraries can take a very long time Importing files in batches is advised.

Mac Users

1. Locate the Finder menu bar at the top of your desktop.

2. Click GO -> CONNECT TO SERVER from the navigation bar.

3. Type in „smb://‟ followed by your Aurender‟s IP address. (For example: smb://192.168.1.171)

The IP address can be found under Conductor SETTINGS -> NAS.

4. Click Connect and a window will appear with a folder labeled „hdd1‟. Open the folder.

5. A popup window will ask for a Username and Password. They can be found in the iPad

application under SETTINGS -> NAS.

Note: If the Aurender is connected through a Gigabit network, the transfer speed will be roughly

50MB/sec. It could take 5-6 hours to copy 1TB of files. We recommend copying files in batches.

The Aurender is able to play back music and copy files simultaneously

Copying from USB Memory Devices

Insert a USB memory device already loaded with songs into USB port on the rear panel. In a

moment, the front display will show „USB Copying‟. When all files have been copied, the display

will blink „USB Copying Done‟. If the folder names are the same as the categories in the

Aurender second row (All, Classic, Jazz, Pop, Local), then the files will go into the respective

folders. If the folder names are not the same, then the files will go into Etc.

Copying from USB CD-ROM Drives

Connect a USB CD-ROM Drive to the USB ports and the Aurender will automatically rip the CD

to the HDD and tag songs with information from an internet database. The quality if conversion is

as good as EAC and other leading conversion software. However, please be advised that the

song metadata on Internet databases are often incorrect and need to be checked and edited.

It is much easier to edit song metadata using a PC or Mac. When using a leading converting

software such as dbPoweramp or Exact Audio Copy, there is no loss of data when files are

converted from CDs to uncompressed or lossless format. This is because the original data and

the recorded data are compared until they are exactly the same. If it isn‟t, an error message will

usually appear.

Aurender Conductor iPad Application

1. Browsing Menu Buttons

The top row buttons categorize songs according to the song file‟s metadata. Tap Song, Artist,

Album, Genre, Composer, or Conductor to browse through songs according to the file meta

tags. Or tap Folder to browse folders. The second row buttons categorize songs according to

the folders on the Aurender Hard Disk Drive. The folder names are All, Classic, Jazz, Pop, K-

Pop and Etc. Songs copied into these folders with show up when the corresponding folder

button is pressed. The folder names may be customized in future versions of the iPad

software application.

2. Contents Window

Scroll through content by flicking your finger up or down. For faster navigation, use the quick

scroll bar on the right hand side. Just tap and scroll to jump to content starting with that

number or letter.

3. Smart Search Window

Search for music by artists, albums, genres, composers, conductors or file names. The

results will appear as you type.

Note: To search numbers, an asterix(*) or a question mark(?) needs to be added after the

number you are searching for in order to get a valid search result.

4. Queue Window

For more information about the queue window, please go to the Playback Features section.

* iPad is a registered trademark of Apple Inc.

Playback Functions

Queue –To add songs to the queue, tap a song in the Contents Window and it will be added to

the queue. The selected song will be marked with a small arrow. Subsequently selected songs

will be added to the end of the queue. For the full queue view, flick the Contents window to the

right. This will also reveal an Edit button. To return the Song Contents window to original size,

flick the screen to the left.

Instant Play - To instantly play a song, tap on the left hand margin of the song you want to play.

An arrow will appear next to the song title. The selected song will appear below the song that

was last played.

Deleting songs from queue - Lightly flick the song title to the left or right, then tap.

Clearing the queue - Simply tap at the bottom of the queue. All songs will be deleted

except for the song that is currently playing. To completely empty the queue, pause the current

song, then tap once or tap twice.

Editing the queue - Swipe the contents-view pane to the right for the full queue view and tap

edit. To rearrange the order of play, locate the 3 horizontal stripes to the right of the song

title. Touch and hold the stripes and drag up or down.

Playback Controls

Other playback options - For more options, touch and hold the title of a song in the Contents

window and a blue pop-up screen will appear with Play Now, Add to Next, Replace Queue and

Add to End menus.

Play Now- Selected songs are added to the queue to be played right now.

Add to Next –Selected songs are added to the queue to be played after the current song

Replace Queue –Clears current queue and replaces queue with selected songs

Add to End –Selected songs are added to the end of the queue.

The touch and hold function also works for specific artist, album, genre, composer, conductor,

index bar, or even categories. 500 is the maximum number of songs possible in a queue or

playlist. Only the first 500 songs will be added, if the selection contains more than 500 songs.

Playlists

Making Playlists

Once you have added one or more songs to the queue,

tap at the bottom of the queue window. Type in the

name for the playlist. Then tap the “save” button.

Altri manuali per S10

Indice

Altri manuali Aurender Lettore MP3

Aurender

Aurender X100L Manuale utente

Manuali Lettore MP3 popolari di altre marche

Blaupunkt

Blaupunkt Compact Drive MP3 Manuale utente

Memorex

Memorex MMP9008 - 8GB USB 2.0 Manuale utente

Meizu Electronic Technology

Meizu Electronic Technology E5 Manuale utente

Naxa

Naxa NMV-173NX Manuale utente

Philips

Philips PSA250 Manuale utente

Zipy

Zipy go! Waving Manuale utente

Sylvania

Sylvania SMPK4068 Manuale utente

Sony

Sony NW-MS7 - Memory Stick Walkman Manuale utente

Irradio

Irradio RF-42UC Manuale utente

NABAIJI

NABAIJI SWIM MUSIC 100 Manuale utente

Laser

Laser MP3-A9-4GB Manuale utente

Samsung

Samsung YP-T7F Manuale utente

Savant

Savant SMS-1001-00 Guida di riferimento rapido

Trevi

Trevi XP 71 BT Manuale utente

AGPtek

AGPtek C2 Manuale utente

MobiBlu

MobiBlu DAH-1500i Manuale utente

Denver

Denver MPS-201 Manuale utente

Steren

Steren MP3-002 Manuale utente