Quick Start Guide—CCTVMODWIFI
Parts
1. DC power supply in
2. Network connector
3. Waterproof case
4. LEDs
5. WiFi antenna
Hardware Installaon
1. Install the antenna.
2. Connect the DC power cord to the camera DC connector and plug the AC adapter into a live mains outlet.
3. Connect the camera and a router, modem or switch with a network cable.
4. Check the network connector if the green light stays on and the yellow light blinks as the data is transmied.
If there are no lights on, make sure the connecon is made properly.
5. Your computer should be connected to the same router, modem or switch to congure the camera for rst
me.
Soware Installaon and set-up
1. Copy the les in the included CD to the HDD in your computer.
2. Go to the folder in the HDD that you copied to.
3. Double-click General Device Manager to install the device manager program for CCTVMODWIFI.
42 BOTANY RD ALEXANDRIA
NSW 2015, SYDNEY AUSTRALIA
PHONE: 1300 130 508 FAX: 02 9698 5476
www.australsurveillance.com.au
sales@australsurveillance.com.au
ABN 85 388 051 001
MASTER SECURITY LICENCE No. 408916063