AuthenTrend ATKey.Card Manuale utente
1
2
| Table of Content
•About ATKey.Card Page 3
•Outlook Page 4
•Highlights Page 5
•3 Steps Quick Start Page 6
•USB Page 7
•BLE Page 8
•NFC Page 9
•LED Page 11
•Fingerprint enrollment Page 12
•APP –ATKey for Windows Page 16
•APP –ATKey for Mac Page 18
•Windows Hello Page 20
•Mac Companion Page 22
•FIDO2: Azure AD Page 23
•FIDO2: Microsoft account Page 25
•FIDO U2F Page 27
•NFC Access Control Page 32
•Regulations Page 33
3
•USB HID + BLE + NFC device, no driver needs
•Portable key for any Windows, Mac or Chromebook
•Up to 8x fingerprints, matching < 1 sec., FAR < 1/50,000, FRR < 2 %
•FIDO2 certificate
4
| Outlook
•Each key has his own unique keycode
•It’s equal to serial number
•Check keycode for production records,
customer service and also warranty
LED#1 (Blue)
LED#2 (RGB Tri-color)
Fingerprint sensor
Power button
Keycode
Mifare ID, 8-digits
90mAh Li-on rechargeable
battery
NFC Antenna area
USB Connector (back side)
5
| Highlights
Before Starts:
•Please do battery charging before you use the card –insert card to USB port
or any USB power adaptor
•If ATKey.card connected to USB port but nothing happened (no LED ON), please
wait for a while since there is protect circuit to make sure the battery voltage is not
lower than 3.0V
•USB port of PC: USB mode, ATKey.card can work as USB key
•USB power adaptor: BLE mode, ATKey.card can work as BLE key
•ATKey.card will be OFF automatically if it’s in idle state for 60 seconds (no any
operations, not insert to USB port, no BLE device connected)
•NFC is off, only when fingerprint matched, NFC is ON for 15 seconds (not is
USB mode, not in BLE mode)
firmware
JavaApplet
•Recommended firmware version 3.00.21.37 or later version
•You can do firmware/JavaApplet upgrade through ATKey app
* JavaApplet needs to sync with firmware version; recommended by 2.0.1
6
| 3 Steps Quick Start
Step 3
Fingerprint matching for authentication
Step 2
Register ATKey to device or Service
Step 1
Enroll fingerprint to ATKey
Windows Hello (option)
FIDO U2F
FIDO2
•Add ATKey to Azure AD as
security key
•Add ATKey to MSFT account
as security key
Windows Logon (via CDF)
Login Google, Facebook, Dropbox,
Salesforce, Gitlab via Chrome
browser as 2nd factor
Passwordless login Microsoft account
or other FIDO2 authentication via
Browsers on Windows , Mac and
Chromebook
OTP (option) 2FA via OTP
Azure AD Passwordless logon
By Standalone enrollment (patent filing)
https://youtu.be/BdF_1jbowXw
or through “ATKey for Windows” app
or through Windows Settings (build 1903
or after builds) via USB or BLE (doing BLE
paring with Windows first)
Or through Chrome Canary browser
(version 81.0.3991.0 or later version)
* If your Windows joined Azure AD, don’t enable this one
* This is only for customization projects or customers
You can find FIDO security key readiness services from here:
https://www.dongleauth.info/
7
| USB
•USB 2.0 Type A
•USB HID device
•USB for data and also battery charge
•Plug USB connect out from backside,
insert it into USB port
•If ATKey.card connected to USB port but
nothing happened (no LED ON), please
wait for a while since there is protect
circuit to make sure the battery voltage
is not lower than 3.0V
•If it’s USB port of PC: USB mode,
ATKey.card can work as an USB key
•If it’s USB power adaptor: BLE mode,
ATKey.card can work as a BLE key
What we can do through USB:
•Add/Delete fingerprint
•through ATKey for Windows
•through Windows Settings
•Firmware version and upgrade
•through ATKey for Windows
•FIDO2
•USB security key for
Windows, Mac and
Chromebook via Edge,
Chrome, Firefox browsers
•Azure AD Passwordless login
•FIDO U2F
•USB security key for Chrome
browser for Windows, Mac
and Chromebook
•Windows Hello
•Battery charge
•OTP (options)
LED:
LED#1 LED#2
ON OFF USB mode, battery is
100% charged
ON flashing Battery charging
flashing Wait for fingerprint
verification
OFF OFF Battery voltage is lower
than 3.0V, please wait for
a while doing battery
charges until LED#2
showing yellow flashing
LED#1
LED#2
LED indicator in USB mode:
8
| BLE - Bluetooth low energy
•Bt4.2 BLE mode
•1st thing: pair target device & ATKey.Card
What we can do through BLE:
•Add/Delete fingerprint
•through ATKey for Windows
•Through ATKey for Mac
•through Windows Settings
•Firmware version and upgrade
•through ATKey for Windows
•Through ATKey for Mac
•FIDO2
•BLE security key for Windows,
Mac and Chromebook via
Edge, Chrome, Firefox
browsers
•Azure AD Passwordless login
•FIDO U2F
•BLE security key for Chrome
browser for Windows, Mac ,
Chromebook, Android, IOS
(app Smart Lock needs)
•Windows Hello via BLE
•Mac login via BLE
LED:
LED#1 LED#2
ON Flashing BLE broadcasting
ON ON BLE connected to device
flashing ON BLE connected and wait
for fingerprint verification
ON flashing BLE secure pairing mode
ON flashing Touch fingerprint sensor
to confirm the pairing
ON Slow
flashing Battery low –please do
battery charging via USB
LED#1
LED#2
LED indicator in BLE mode:
ON
Device (Windows, Mac,
Chromebook, iOS,
Android) or App is ready
for pairing •Power on ATKey.card
•Double-click power
button to secure
pairing mode (LED#2)
•Scan and find
specific card –
check the
keycode to
identify the card
•Select it to pair
•Touch fingerprint
sensor to confirm the
pairing (LED#2)
9
| NFC
•Work with ISO 14443 Mifare Type A
(for 13.56MHz NFC reader)
•USB/BLE NFC card reader
•Android Phone
•NFC access control
•NFC door locker
•NFC is off, only boost after
fingerprint matching for 15 seconds
•8-digits unique Mifare ID
•App is running on JavaApplet
What we can do through NFC:
•FIDO2 (via JavaApplet) –by demands
•NFC security key for Windows,
Mac and Chromebook via Edge,
Chrome, Firefox browsers
•Azure AD Passwordless login
•FIDO U2F (via JavaApplet)
•NFC security key for Chrome
browser for Windows, Mac ,
Chromebook AND Android
•NFC access control or door locker
(via MiFare ID)
•Power on ATKey.card, verify
fingerprint to turn NFC ON,
then it’s same as normal
NFC card to
touch/touchless to reader
to unlock; NFC is ON for 15
seconds
•But if ATKey.card is in USB mode
or BLE connected mode, NFC
won’t be enabled
LED:
LED#1 LED#2
flashing Flashing Verify fingerprint to
enable NFC
ON ON NFC is ON
LED#1
LED#2
LED indicator in NFC mode:
Note:
at Power ON, BLE starts broadcasting,
before BLE connected, fingerprint verified,
NFC will be ON for 15 sec.; but if BLE
connected, fingerprint matching is for BLE;
if your host is PC (Windows or Mac or
Chormebook), recommend not paired BLE,
by NFC only to avoid BLE/NFC conflicts to
Card.
10
| OS vs. Interface vs. Functionalities
BLE USB NFC
Enroll fingerprint
√ √
Azure AD logon (FIDO2)
√ √ by demands
Windows 10
build 1903 or later version
•
FIDO2 (Edge, Chrome, Firefox)
•
U2F (Chrome)
√ √ √
Windows 10 build 1809 …
•
FIDO2 (edge, Chrome, Firefox)
•
U2F (Chrome)
√
Windows logon via Windows Hello (CDF)
√ √
Android:
•
FIDO2 (Chrome browser on Android)
•
U2F (Chrome browser on Android)
√
iOS:
•
U2F (Chrome browser on iOS via Smart Lock) √
Mac OS X logon
√
Mac OS FIDO2 and U2F via Chrome browser
√ √ √
Chromebook FIDO2 and U2F via Chrome browser
√ √ √
NFC door locker (
Mifare typeA) √
•For FIDO2, FIDO U2F or Windows Hello, you can just register by one interface (USB or BLE), then you can use the
card via any interface (USB, BLE, NFC) for authentications
Altri manuali per ATKey.Card
1
Indice
Altri manuali AuthenTrend Controllori di accesso IP
