
4. Wiring Diagram
5. Instructions
Pls connect as per point 4. Connection Diagram the LED lights on the receiver, insert the battery
in the receiver and then connect controller and receiver.
5.1. Press the Learning Key-Button on the receiver, and thereafter press the rotary button
on the controller. If the LED light flashes once, you have successfully completed the pairing.
Repeat the process withe the other receivers, if you need them also. You can connect any number
of recipients.
5.2. One short press on the rotary button to turn the unit ON and OFF.
Adjust the brightness using the rotary button and turn from left to right for 1-100%
Adjust the brightness using the rotary button and turn from right to left for 100-1%
Memory (Address) delete:
If you want to erase the memory of the receiver, hold the learning key button for 10 seconds,
while the receiver is powered. Through the flash lighting of the LEDs the deletino of the memory
will confirmed: The receiver is thus set back to factory settings and loses its addressing.