3.4.2 Enter CLOSED Position ................................................................................................. 79
3.4.3 Enter OPEN Position ..................................................................................................... 80
3.4.4 Set up START Position ................................................................................................... 81
3.4.5 Phase Hold.................................................................................................................... 82
3.4.6 Add Trim Data During Commissioning.......................................................................... 83
3.4.7 Commissioning VSD...................................................................................................... 85
3.4.8 Set GOLDEN START Position........................................................................................ 86
3.4.9 Set FGR Position ........................................................................................................... 88
3.4.10 Set HIGH Position ......................................................................................................... 90
3.4.11 Set INTER Position......................................................................................................... 91
3.4.12 Set INTER or START Position......................................................................................... 92
3.4.13 Save Commission.......................................................................................................... 93
3.5 Fuel Flow Metering............................................................................................................... 94
3.5.1 Commissioning Fuel Flow Through MM........................................................................ 94
3.5.2 Commissioning Fuel Flow Through 4-20mA Feedback ................................................. 96
3.5.3 Calorific Fuel Data........................................................................................................ 97
3.5.4 Conversion Factor for Imperial Gas Flow Meters ......................................................... 98
3.5.5 Correction Factor for Burners Significantly Above Sea Level ....................................... 98
3.5.6 Gas Volume Conversion Factors................................................................................... 99
3.6 Gas/ Air Pressure Commission ........................................................................................... 101
3.7 Single Point Change ........................................................................................................... 102
3.8 Online Changes.................................................................................................................. 107
4FUEL OUTPUT MODES AND CHANGEOVER OPTIONS.......................................... 108
4.1 Overview............................................................................................................................ 108
4.2 Fuel Output Modes on the Mk8 MM.................................................................................. 108
4.3 Single Fuel Output Mode (SFOM)...................................................................................... 110
4.3.1 Fuel Configuration and Wiring in SFOM .................................................................... 110
4.3.2 Pressure Sensors in SFOM.......................................................................................... 110
4.3.3 Commissioning in SFOM............................................................................................. 110
4.3.4 Fuel Changeover Process in SFOM ............................................................................ 110
4.4 Dual Fuel Output Mode (DFOM) ....................................................................................... 111
4.4.1 Fuel Configuration and Wiring in DFOM ................................................................... 111
4.4.2 Pressure Sensors in DFOM ......................................................................................... 111
4.4.3 Commissioning in DFOM ............................................................................................ 112
4.4.4 Fuel Changeover Process in Dual Fuel Output Mode ................................................. 112
4.5 Fuel Change on the Fly (COF)............................................................................................ 114
4.5.1 Overview.................................................................................................................... 114
