Autoseeker AT-19 Manuale utente

AT-19 Wired GPS Tracker

PREFACE

Thank you for purchasing an Autoseeker GPS Tracker.

This manual will guide you to the most optimal operation of your GPS tracker. Make sure

to read this manual carefully before using this product. Please note that the specifications

and information contained in this manual are subject to changes without prior notice. Any

changes will be integrated in the next release. The manufacturer and agents assume no

responsibility for any errors or omissions in this document.

Overview

The AT-19 GPS/GSM tracker is a small wired vehicle remote positioning device with built-

in GPS/GSM/GPRS technology.

The tracker transmits the coordinates to your cell phone by SMS.

These coordinates are then used to locate the tracker position on Google maps or other

mapping software.

Additionally, the tracker also uploads these coordinates to a designated server through

GPRS. Users can then track the position of the tracker on our mobile app or website portal

CONTENTS

1 What’s in the box.................................................................................................................................. 4

2 Specification.......................................................................................................................................... 4

3 LED Status ............................................................................................................................................. 4

4 Wiring the tracker ................................................................................................................................. 4

4.1 Wiring connections for the tracker............................................................................................... 4

4.2 Connect the Relay ......................................................................................................................... 5

5 Download the tracking app or access the website ............................................................................... 5

6 Activate and insert the SIM card into the tracker................................................................................. 6

6.1 RICA requirements........................................................................................................................ 6

6.2 Load data / airtime onto the SIM card.......................................................................................... 6

7 Tracker default settings ........................................................................................................................ 6

8 IP Address – the IP address has been set.............................................................................................. 6

9 Network APN – the APN has been set for MTN.................................................................................... 7

10 Set Data Upload Interval................................................................................................................... 7

11 Set Control phone number ............................................................................................................... 8

12 Set daily report.................................................................................................................................. 9

13 Set Geo fence.................................................................................................................................... 9

14 Set shake alarm...............................................................................................................................10

15 Set over speed alarm ...................................................................................................................... 10

16 Set acc alarm...................................................................................................................................11

17 set sleep mode................................................................................................................................ 12

18 set voice function............................................................................................................................ 13

19 Set the work mode.......................................................................................................................... 13

20 Change user password....................................................................................................................14

21 Request location coordinates ......................................................................................................... 14

22 Request location with Google map URL link................................................................................... 15

23 Battery low voltage alert................................................................................................................. 16

24 Cut Fuel ........................................................................................................................................... 16

25 Power off alert ................................................................................................................................16

26 Phone Tracking................................................................................................................................17

27 Time Zone........................................................................................................................................17

28 ACC Illegal START Alarm.................................................................................................................. 17

29 Special Command: ..........................................................................................................................18

29.1 Reset - Command: RESET ............................................................................................................ 18

29.2 Read the current setup information of the tracker - Command: RCONF ..................................18

1WHAT’S IN THE BOX

•AT-19 GPS Tracker (1 x piece)

•Wiring Harness (1 x piece)

•QC Card (1 x piece)

•Quick User Guide (1 x piece)

•Fuel Cut Off Relay (1 x piece)

2SPECIFICATION

GSM Module MTK program, GSM 850/900/1800/1900

GPS Shipset

U-BLOX 7020 (Supports

GPS/Glonass/Galileo/Compass)

GPS Sensitivity

-162db

Hot Start

1 second average

Warm Start

30 second average

Cold Start

35 second average

Altitude Limit

18 000 meters maximum

Operating Temperature

-20°C – 65°C

Humidity

5% to 95% Non-condensing

Dimensions

750 mm x 250 mm x 150 mm

Voltage

15V – 45V

Average Current (Standby Mode)

< 84 mA

3LED STATUS

LED Flashing

LED ON

Continuously

Orange LED – GSM Signal Status

Searching for GSM Signal

GSM Signal locked

BLUE LED – GPS Signal Status

Searching for GSM Signal

GPS Signal Locked

RED LED – Battery Status

Charging / ON

No Power

4WIRING THE TRACKER

4.1 WIRING CONNECTIONS FOR THE TRACKER

4.2 CONNECT THE RELAY

The yellow wire controls the fuel cutoff relay coil and connects pin 86. Pin 85 of the relay

coil connects to the fuel channel to supply 12V power to the coil. Pin 30 and Pin 87a are

normally closed ends, and connect the fuel channel power circuit in series. Please ensue

the wires are connected correctly.

Disclaimer: The supplier will not be responsible for device damage caused by wrong

installation.

Disclaimer:Make sure the tracker unit has been wired correctly as per the above wiring diagram. The

manufacturer and / or distributors and / or agents do not accept any liability for damaged tracking units

or any consequential damage caused to your vehicle or parts thereof due to incorrect wiring. If you are

uncertain how to do this wiring, seek the help of a qualified auto electrician.

5DOWNLOAD THE TRACKING APP OR ACCESS THE WEBSITE

Android App

https://play.google.com/store/apps/details?id=com.fw.gps.iottracking&gl=ZA

•Log in with the user name and password supplied to you in your welcome email.

•Be sure to change your password once you have logged in

6ACTIVATE AND INSERT THE SIM CARD INTO THE TRACKER

6.1 RICA REQUIREMENTS

Take the supplied MTN SIM card to a MTN agent to have the RICA requirements to be completed as per

the required legal requirements.

6.2 LOAD DATA /AIRTIME ONTO THE SIM CARD

•Monthly data requirement is approximately 35mb – 50mb per month.

•Air time will be required if you are going to use the voice function to listen in to what is being

said in the vicinity of the tracker.

•Air time / SMS bundles will be required if you want the alarm notifications to be sent to your

mobile phone, or if you are going to use SMS tracking.

7TRACKER DEFAULT SETTINGS

Password – 0000

Battery – OFF

Work mode – GPRS

Voice function – ON

Note: Alarm notifications are only sent to pre-saved numbers

8IP ADDRESS –THE IP ADDRESS HAS BEEN SET

Send this command by SMS from a mobile phone to the SIM card number of the tracker.

Apple ISTORE

Search for IOTTRACKING

Website Portal

http://yoursgps.com/

Do not change the IP address unless you intend using an alternative tracking software / mobile app

9NETWORK APN –THE APN HAS BEEN SET FOR MTN

Send this command by SMS from a mobile phone to the SIM card number of the tracker.

If you intend using another mobile network, set the APN to that of your chosen network

If you would like to change the APN, username and password of the SIM card.

Send this command by SMS from a mobile phone to the SIM card number of the tracker.

10 SET DATA UPLOAD INTERVAL

Set the upload interval while the ACC is ON (only works if the ACC function has been connected

Command

：

804 + user password + Space + IP + Space + Port

Eg: 8040000 183.63.52.125 8185

Tracker response: SET OK

Set APN - Command

：

803 + user password + space + APN

Eg：8030000 MyMtn

Tracker response: SET OK

Set the APN, username and password - Command: 803 + user password + space

+ APN + space + APN User Name + space + APN Password

Eg : 8030000 MyMtn MyMtn 1234

Tracker response: SET OK

Set the upload interval while the ACC is OFF (only works if the ACC function has been connected

Note: Time denotes, interval time, the unit is seconds，the range is [10 – 59999] When

T=0 no upload will happen.

11 SET CONTROL PHONE NUMBER

Note:

1. The tracker can save 3 numbers

2. Numbers will overwrite each other if the sequence number is duplicated

3. Any mobile number can control the tracker, but alarm information is only sent to pre-

saved numbers.

ACC ON - Command：805 + user password + space + T

Eg：8050000 20

Tracker response: SET OK

ACC OFF - Command

：

809 + user password + space + T

Eg：8090000 300

Tracker response: SET OK

Command: control phone number + user password + space + Sequence number (1-

3) **

Eg: 08212345670000 1 (This will set cell number 082123456 to position 1)

Tracker response: SET OK

12 SET DAILY REPORT

Note: HH denotes hours, with defined range of [00, 23]. MM denotes minutes with defined

range of [00, 59].

13 SET GEO FENCE

Note:

•Tracker will call and send the alarm message to the first pre-saved number only.

•This is the manual command, but is better configured from the app / website

as multiple geo fences can be accurately positioned and named with the aid

of a map.

Note: The default radius is 500 meters

Set time for daily report to be sent - command: 665 + user password + HHMM

Eg: 66500001022

Note: HH denotes hours, with defined range of [00, 23]. MM denotes minutes with

defined range of [00, 59].

Cancel daily report - command: 665 + user password + OFF

Eg: 6650000OFF

Tracker response: SET OK

Turn ON geo fence function - Command: 211 + password

Eg: 2110000

Tracker response: SET OK

14 SET SHAKE ALARM

Tracker will send a message to the first pre-saved number only

Note: Time denotes the length of a shake in seconds [0-120 seconds]

15 SET OVER SPEED ALARM

Tracker will call and send alarm message to the 3 pre-saved numbers

Set geo fence - Command: 005 + user password + space + M

Eg: 0050000 1000 (m denotes distance in meters)

Tracker response: SET OK

Turn geo fence off - Command: 210 + password

Eg: 2100000

Tracker response SET OK

Set the shake alert - Command: 181 + user password + space + T + XX

Eg: 1810000T05

(XX denotes seconds. In the example the alert will be sent after the tracker has sensed

a vibration for 5 seconds or more.)

Tracker response: SET OK

Cancel the shake alert – Command: 180 + user password

Eg: 1800000

Tracker response SET OK

Indice

Altri manuali Autoseeker GPS

Autoseeker

Autoseeker AT-4 Manuale utente

Manuali GPS popolari di altre marche

Raven

Raven Cruizer II Manuale

Hama

Hama 53118 Manuale utente

Garmin

Garmin SOUNDER 125 Manuale utente

Garmin

Garmin DEZL 580 Manuale utente

Jigabot

Jigabot EX Manuale utente

Pointer

Pointer Cellocator CelloTrack XT LTE Guida all'installazione

Queclink

Queclink GV55LITE Manuale utente

Voxson

Voxson Voxtrack GPS500 Manuale di istruzioni

Garmin

Garmin ECHOMAP PLUS Manuale utente

Starcom Systems

Starcom Systems Kylos Compact Manuale utente

Garmin

Garmin 15 H Series Manuale utente

Cobra

Cobra Marine MC 600Ci Manuale utente

Cellocator

Cellocator CelloTrack T Manuale utente

Enfora

Enfora Mini-MT GSM2228UG001 Manuale utente

Magellan

Magellan eXplorist 100 Manuale utente

LTE

LTE G50B Manuale utente

Garmin

Garmin DEZL OTR500 Manuale utente

SkyGolf

SkyGolf SkyCaddie SG1 Manuale utente