
864 ST Fireback Installation
SKU # 96100184 –96100186 –96100189 - 96100190
Page 2 of 2 9/15/08 Travis Industries, Inc.
4 Carefully place he floor
firebacks in o posi ion.
You mus ip hem under
and around he corners of
he burner.
5 Carefully replace he fron
and rear gra es ( hey res
on op of he floor
firebacks).
WARNING:
When replacing he gra e
do no drag he gra e
across he firebacks ( hey
damage easily). You may
need o lif he burner
sligh ly while ins alling he
gra e. NOTE: These tabs are bent out when using the accent light. Make sure
to carefully bend them flush if the accent light was previously installed
(then reposition them after firebacks are installed).
6 Ins all he side firebacks
following he direc ions
below.
7 Res ore he fireplace o
he correc configura ion.
Place the side firebacks into position.
Remove the clips on both sides (loosen the screws
a couple turns and slide clips up and out).
b
Secure the clips to anchor
the side firebacks.
c
5/16" Nutdriver
a
The ceramic firebacks are fragile. Ensure proper alignment of individual pieces in each
step. To achieve the ideal appearance, you may need to make slight adjustments.