Avanti 57637 Istruzioni per il montaggio
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21a
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2020 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly an d se rv ic e may n ot b e in cl uded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637
EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM
G,+7*%&2%O&8$*8$#
Safety ......................................................... 2
Set-up: Before Use ..................................... 6
Specifications ............................................. 6
Operation .................................................... 7
Maintenance .............................................. 10
Parts Lists and Diagrams .......................... 12
Warranty .................................................... 16
QFKMLMR%EHNSIPE%FMT%T6;LMLGLIME
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637
EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM
LNJIKGFMG%EF;6GH%LM;IKNFGLIM
R*8*(,7%E,2*$U%Q,(8"83#
% QFKMLMR%K*,9%,77%#,2*$U%),(8"83#%,89%"8#$('4$"&8#1%%%
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
E,V*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
1. Q&(W%,(*,%#,2*$U
a. X**/%)&(W%,(*,%47*,8%,89%)*77%7"$1
Cluttered or dark areas invite accidents.
b. T&%8&$%&/*(,$*%$.*%O&5/(*##&(%"8%*Y/7&#"V*%
,$5&#/.*(*#=%#'4.%,#%"8%$.*%/(*#*84*%
&2%27,55,+7*%7"<'"9#=%3,#*#%&(%9'#$1
Compressor motors produce sparks
which may ignite the dust or fumes.
c. G&%(*9'4*%$.*%("#W%&2%*7*4$("4%#.&4W%
&(%"8Z'(U=%'#*%"89&&(#%&87U.
d. X**/%4."79(*8%,89%+U#$,89*(#%,),U%
2(&5%,8%&/*(,$"83%4&5/(*##&(1
2. 67*4$("4,7%#,2*$U
a. O&5/(*##&(%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%%
M*V*(%5&9"2U%$.*%/7'3%"8%,8U%),U1%%
T&%8&$%'#*%,8U%,9,/$*(%/7'3#%)"$.%3(&'89*9%
4&5/(*##&(#1 Standard plugs and matching
outlets will reduce risk of electric shock.
b. T&%8&$%*Y/&#*%4&5/(*##&(%$&%(,"8%&(%)*$%
4&89"$"&8#1 Water entering a compressor
will increase the risk of electric shock.
c. T&%8&$%,+'#*%$.*%4&(91%%M*V*(%'#*%$.*%
4&(9%2&(%'8/7'33"83%$.*%4&5/(*##&(1%%
X**/%4&(9%,),U%2(&5%.*,$=%&"7=%#.,(/%*93*#%
&(%5&V"83%/,($#1%%Damaged or entangled
cords increase the risk of electric shock.
3. J*(#&8,7%#,2*$U
a. E$,U%,7*($=%),$4.%).,$%U&'%,(*%9&"83%,89%
'#*%4&55&8%#*8#*%).*8%&/*(,$"83%$."#%
4&5/(*##&(1%%T&%8&$%'#*%$."#%4&5/(*##&(%
)."7*%U&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%
&2%9('3#=%,74&.&7%&(%5*9"4,$"&81 A moment
of inattention while operating a compressor
may result in serious personal injury.
b. [#*%#,2*$U%*<'"/5*8$1
Wear protective paint spraying
gloves and a NIOSH-approved
respirator during use.
c. F7),U#%)*,(%*U*%/(&$*4$"&81
Wear ANSI-approved
safety goggles.
d. J(*V*8$%'8"8$*8$"&8,7%#$,($"831%%68#'(*%$.*%
#)"$4.%"#%"8%$.*%&22?/&#"$"&8%+*2&(*%4&88*4$"83%
$&%/&)*(%#&'(4*%&(%5&V"83%$.*%4&5/(*##&(1
4. O&5/(*##&(%'#*%,89%4,(*
a. G&%(*9'4*%$.*%("#W%&2%*7*4$("4%#.&4W=%9&%
8&$%*Y/&#*%$&%(,"81% Store indoors.
b. T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%#)"$4.%
9&*#%8&$%$'(8%"$%&8%,89%&221 Any compressor
that cannot be controlled with the switch
is dangerous and must be repaired.
c. T"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%#&'(4*%
+*2&(*%5,W"83%,8U%,9Z'#$5*8$#=%4.,83"83%
,44*##&("*#=%&(%#$&("83%$.*%4&5/(*##&(1
Such preventive safety measures reduce the
risk of starting the compressor accidentally.
d. E$&(*%,8%"97*%4&5/(*##&(%&'$%&2%$.*%(*,4.%
&2%4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%
'82,5"7",(%)"$.%$.*%4&5/(*##&(%&(%$.*#*%
"8#$('4$"&8#%$&%&/*(,$*%"$1 A compressor is
dangerous in the hands of untrained users.
e. N,"8$,"8%$.*%4&5/(*##&(1%%X**/%$.*%
4&5/(*##&(%47*,8%2&(%+*$$*(%,89%#,2*(%
/*(2&(5,84*1%%;&77&)%"8#$('4$"&8#%2&(%
7'+("4,$"83%,89%4.,83"83%,44*##&("*#1%%
X**/%9(U=%47*,8%,89%2(**%2(&5%&"7%,89%3(*,#*1%%
O.*4W%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&V"83%
/,($#=%+(*,W,3*%&2%/,($#%,89%,8U%&$.*(%
4&89"$"&8%$.,$%5,U%,22*4$%$.*%4&5/(*##&(\#%
&/*(,$"&81%%L2%9,5,3*9=%.,V*%$.*%4&5/(*##&(%
(*/,"(*9%+*2&(*%'#*1 Many accidents are
caused by a poorly maintained compressor.
f. [#*%$.*%4&5/(*##&(%"8%,44&(9,84*%)"$.%
$.*#*%"8#$('4$"&8#=%$,W"83%"8$&%,44&'8$%
$.*%)&(W"83%4&89"$"&8#%,89%$.*%)&(W%$&%
+*%/*(2&(5*91 Use of the compressor for
operations different from those intended
could result in a hazardous situation.
5. E*(V"4*
a. ],V*%U&'(%4&5/(*##&(%#*(V"4*9%+U%,%
<',7"2"*9%(*/,"(%/*(#&8%'#"83%&87U%"9*8$"4,7%
(*/7,4*5*8$%/,($#1 This will ensure that the
safety of the compressor is maintained.
Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637
EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM
E/*4"2"4%E,2*$U%Q,(8"83#
1. K"#W%&2%2"(*%&(%*Y/7&#"&8%?%9&%8&$%#/(,U%
27,55,+7*%7"<'"9%"8%,%4&82"8*9%,(*,%&(%$&),(9#%,%
.&$%#'(2,4*1%%E/(,U%,(*,%5'#$%+*%)*77?V*8$"7,$*91%%
T&%8&$%#5&W*%)."7*%#/(,U"83%&(%#/(,U%).*(*%
#/,(W%&(%27,5*%"#%/(*#*8$1%%F(4"83%/,($#%?%W**/%
4&5/(*##&(%,$%7*,#$%^_%2**$%,),U%2(&5%*Y/7&#"V*%
V,/&(#=%#'4.%,#%).*8%#/(,U"83%)"$.%,%#/(,U%3'81
2. K"#W%&2%+'(#$"83%?%9&%8&$%,9Z'#$%(*3'7,$&(%."3.*(%
$.,8%5,(W*9%5,Y"5'5%/(*##'(*%&2%,$$,4.5*8$1
3. K"#W%&2%"8Z'(U%?%9&%8&$%9"(*4$%,"(%
#$(*,5%,$%/*&/7*%&(%,8"5,7#1
4. T&%8&$%'#*%$&%#'//7U%+(*,$."83%,"(1
5. Do not spray near open flames, pilot lights,
stoves, heaters, the air compressor, or any
other heat source. Most solvents and coatings
are highly flammable, particularly when
sprayed. Maintain a distance of at least 25 feet
from the air compressor. If possible, locate
the air compressor in a separate room.
6. Read all of the information concerning
coating products and cleaning solvents.
T&%8&$%'#*%4.7&("8,$*9%#&7V*8$#%
`*131%>?>?>%$("4.7&(&*$.U7*8*%,89%
9"4.7&(&5*$.,8*=%,7#&%W8&)8%,#%
5*$.U7*8*%4.7&("9*a%$&%47*,8%#/(,U%3'8#1%%
N,8U%#/(,U%3'8#%4&8$,"8%,7'5"8'5=%
)."4.%(*,4$#%#$(&837U%$&%4.7&("8,$*9%#&7V*8$#1%%
Contact the solvent or coating manufacturer as
needed regarding potential chemical reactions.
7. Spraying hazardous materials may result in serious
injury or death. Do not spray pesticide, acid,
corrosive material, fertilizer, or toxic chemicals.
8. Paints and solvents may be harmful or fatal if
swallowed or inhaled. Avoid prolonged skin
contact with solvents or paints as they will
irritate skin. After any contact, immediately
wash off exposed area with hot, soapy water.
9. Air hose fittings may get hot during use.
Allow fittings to cool before disconnecting.
10. T&%8&$%7*,V*%4&5/(*##&(%'8,$$*89*9%
2&(%,8%*Y$*89*9%/*("&9%)."7*%/7'33*9%"81%%
[8/7'3%4&5/(*##&(%,2$*(%)&(W"831
11. X**/%4&5/(*##&(%)*77?V*8$"7,$*91%%
T&%8&$%4&V*(%4&5/(*##&(%9'("83%'#*1
12. Drain Tank daily and after use. Internal rust causes
tank failure and explosion.
13. Do not remove the valve cover or
adjust internal components.
14. Compressor head gets hot during operation.
Do not touch it or allow children nearby
during or immediately following operation.
15. Do not use the air hose to move the compressor.
16. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
17. All air line components, including hoses, pipe,
connectors, filters, etc., must be rated for a minimum
working pressure of 150 PSI, or 150% of the
maximum system pressure, whichever is greater.
18. USE OF AN EXTENSION CORD IS NOT
RECOMMENDED. If you choose to use an
extension cord, use the following guidelines:
GFSP6%F-%%K6OINN6MT6T%NLMLN[N%QLK6%
RF[R6%;IK%6bG6MELIM%OIKTE%
`>^_%!IPGa
MFN6JPFG6%
FNJ6K6E
`,$%2'77%7&,9a
6bG6MELIM%OIKT%
P6MRG]
0 – 6 18 16 16 14
6.1 – 10 18 16 T&%8&$%'#*1
10.1 – 12 16 16 T&%8&$%'#*1
12.1 – 16 14 12 T&%8&$%'#*1
a. Make sure your extension cord
is in good condition.
b. Be sure to use an extension cord which
is heavy enough to carry the current your
product will draw. An undersized cord will
cause a drop in line voltage resulting in loss
of power and overheating. Table A shows the
correct size to use depending on cord length
and nameplate ampere rating. If in doubt,
use the next heavier gauge. The smaller
the gauge number, the heavier the cord.
19. Maintain labels and nameplates on the
compressor. These carry important safety
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
20. This product is not a toy.
Keep it out of reach of children.
21. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
%EF!6%G]6E6%LMEGK[OGLIME1
Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637
EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM
R(&'89"83
GI%JK6!6MG%6P6OGKLO%E]IOX%FMT%T6FG]%%
;KIN%LMOIKK6OG%RKI[MTLMR%QLK6%OIMM6OGLIM-%
O.*4W%)"$.%,%<',7"2"*9%*7*4$("4",8%"2%U&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%
/(&/*(7U%3(&'89*91%%T&%8&$%5&9"2U%$.*%/&)*(%4&(9%/7'3%/(&V"9*9%)"$.%$.*%4&5/(*##&(1%%
M*V*(%(*5&V*%$.*%3(&'89"83%/(&83%2(&5%$.*%/7'31%%T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%/&)*(%4&(9%&(%/7'3%
"#%9,5,3*91%%L2%9,5,3*9=%.,V*%"$%(*/,"(*9%+U%,%#*(V"4*%2,4"7"$U%+*2&(*%'#*1%%L2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$=%
.,V*%,%/(&/*(%&'$7*$%"8#$,77*9%+U%,%<',7"2"*9%*7*4$("4",81
>>_?>^_%!FO%R(&'89*9%O&5/(*##&(#-%O&5/(*##&(#%)"$.%G.(**%J(&83%J7'3#
1. In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This compressor is equipped with an electric
cord having an equipment-grounding conductor
and a grounding plug. The plug must be
plugged into a matching outlet that is properly
installed and grounded in accordance
with all local codes and ordinances.
2. Do not modify the plug provided –
if it will not fit the outlet, have the proper
outlet installed by a qualified electrician.
3. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow
stripes is the equipment-grounding conductor.
If repair or replacement of the electric cord or
plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
4. Check with a qualified electrician or service
personnel if the grounding instructions are
not completely understood, or if in doubt as to
whether the compressor is properly grounded.
5. Use only 3-wire extension cords that have
3-prong grounding plugs and 3-pole receptacles
that accept the compressor’s plug.
6. Repair or replace damaged or
worn cord immediately.
R(&'89"83%
J"8
>^B%!FO%c?J(&83%J7'3%,89%I'$7*$
`2&(%'/%$&%>^B%!FO%,89%'/%$&%>B%Fa
7. This compressor is intended for use on a
circuit that has an outlet that looks like the one
illustrated above in >^B%!FO%c?J(&83%J7'3%
,89%I'$7*$. The compressor has a grounding
plug that looks like the plug illustrated above
in >^B%!FO%c?J(&83%J7'3%,89%I'$7*$.
8. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
9. Do not use an adapter to connect this
compressor to a different outlet.
EU5+&7&3U
JEL Pounds per square inch of pressure
O;N Cubic Feet per Minute flow
EO;N Cubic Feet per Minute flow
at standard conditions
MJG National pipe thread, tapered
MJE National pipe thread, straight
!Volts
dAlternating Current
FAmperes
Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637
EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM
E/*4"2"4,$"&8#
Electrical Rating 120VAC / 60Hz / 1A
Air Outlet Size 1/4" BSP
Air Pressure Shut-off 58 PSI
Restart 43.5 PSI
Nozzle/Needle Size 0.3mm
Sound Level 47 dBA @ 3'
LMTIIK%]I[E6]IPT%[E6%IMPH1
E*$?[/-%S*2&(*%[#*
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%
G'(8%$.*%J&)*(%E)"$4.%fI;;g%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%
&'$7*$%+*2&(*%,##*5+7"83%&(%5,W"83%,8U%,9Z'#$5*8$#%$&%$.*%F"(%O&5/(*##&(1
M&$*- For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
O&5/&8*8$#%,89%O&8$(&7#
J&)*(%
E)"$4.
F"(+('#.%
]&79*(
K*3'7,$&(0
;"7$*(
J(*##'(*%
R,'3*
F"(%
I'$7*$
T(,"8%
!,7V*
F"(%
]&#*
h'"4W?O&88*4$%
;"$$"83
M&ii7*%
O,/
M**97*%
O,/
G("33*(
J,"8$%
O'/ J(*?E*$%],897*%
)"$.%M**97*%
P"5"$"83%X8&+
h'"4W?O&88*4$%
O&'/7*(
Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637
EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM
I/*(,$"83%L8#$('4$"&8#
%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
Q&(W%F(*,%E*$%[/
1. Designate a work area that is clean and well-lit.
The work area must not allow access by
children or pets to prevent injury.
2. Locate the Air Compressor on a flat level surface
to ensure proper pump lubrication and to prevent
around the unit to allow air circulation.
3. Route the power cord from the Air Compressor
to the grounded wall outlet, along a safe path
without creating a tripping hazard or exposing
the power cord to possible damage.
4. Before spraying, mask nearby objects not being
sprayed and lay cloths (not included) on the floors.
F"(%O&88*4$"&8%E*$'/
1. Using PTFE tape, connect included
Quick Connect fitting to included Air Hose.
2. Using PTFE tape, connect Air Hose to Air Outlet.
3. Connect Airbrush to its Quick-Connect
Fitting pre-installed on Air Hose.
4. The Air Hose must be able to reach work
area with enough extra length to allow
free movement while working.
R*8*(,7%O&5/(*##&(%I/*(,$"&8
1. Pull up on Regulator, then turn Regulator
counterclockwise completely to close.
Push down on Regulator.
2. Plug Power Cord into grounded 120VAC outlet.
3. Turn Power Switch ON.
4. Allow Air Compressor to build up
pressure until it cycles off.
5. Check for air leaks by applying soapy water to
connections while the Air Compressor is pumping
and after pressure cut-out. Look for air bubbles.
If air bubbles are present at connections, tighten
connections. Do not use the Air Compressor unless
all connections are air tight, the extra air leaking
out will cause the Air Compressor to operate too
often, increasing wear on the Air Compressor.
M&$*- As long as the Power Switch is set to ON, the
operation of the Air Compressor is automatic, controlled
by an internal pressure switch. The Air Compressor will
turn on automatically when the air pressure drops to
43.5 PSI, and will turn off automatically
when the air pressure reaches 58 PSI.
QFKMLMRj%GI%JK6!6MG%E6KLI[E%
LMe[KH%FMT%T6FG]%;KIN%
6bJPIELIM-
T&%8&$%,9Z'#$%$.*%"8$*(8,7%
/(*##'(*%#)"$4.1%%Any change to the
automatic pressure levels may cause excess pressure to
accumulate, causing a hazardous situation.
F'$&5,$"4%E.'$%I22%EU#$*5
1. If the Air Compressor automatically shuts off
before reaching its normal cutoff pressure:
a. Turn Power Switch to OFF position.
b. Unplug Air Compressor.
c. Wait until the Air Compressor
cools down (about 30 minutes).
d. Resume operation.
2. Possible causes of repeated automatic
shut off of the compressor are:
a. Using an extension cord that
is too long or narrow;
b. An air leak or open hose causing the compressor
to cycle too often and build up heat.
c. Turning Air Compressor off and
on again too quickly.
3. Correct any issues before further use to
avoid damage to the compressor.
Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637
EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM
R*8*(,7%F"(+('#.%I/*(,$"&8
GI%JK6!6MG%E6KLI[E%LMe[KH-%%T&%8&$%,9Z'#$%&(%$,5/*(%)"$.%,8U%4&8$(&7%&(%
4&5/&8*8$%"8%,%),U%8&$%#/*4"2"4,77U%*Y/7,"8*9%)"$."8%$."#%5,8',71%%
L5/(&/*(%,9Z'#$5*8$%4,8%(*#'7$%"8%$&&7%2,"7'(*%&(%&$.*(%#*("&'#%.,i,(9#1%
2(&5%#/(,U"83%,(*,%,#%/&##"+7*1
J,"8$%J(*/,(,$"&8%,89%;"77"83
M&$*- Proper paint mixture is essential. Follow paint
manufacturer’s directions for thinning.
1. Designate container for waste.
2. Thin paint according to manufacturer’s
directions and mix thoroughly.
3. If necessary, carefully strain paint through
a paint strainer or a piece of cheesecloth.
4. Remove Lid from Paint Cup. Using included
Pipette, add paint to Cup. Replace Lid.
5. Immediately clean Pipette with paint
manufacturer’s recommended solvent. Dispose
of paint and solvent in waste container.
J,"8$0F"(%;7&)%F9Z'#$5*8$
1. M**97*%P"5"$"83%X8&+-%%
a. Turn clockwise to reduce maximum
paint flow. This is helpful when
painting fine lines and detail work.
b. Turn counterclockwise to increase paint flow.
M**97*%
P"5"$"83%
X8&+
2. T"#$,84*- Move Airbrush closer to
workpiece for thinner lines, move Airbrush
away from workpiece for wider lines.
3. K*3'7,$&(- Increase pressure for more air
flow. Decrease pressure for less air flow.
J,"8$"83
M&$*- Practice painting techniques on scrap workpiece.
1. Plug Power Cord into grounded 120VAC outlet.
2. Turn Power Switch ON.
3. Press Trigger all the way down to start air flow,
then adjust Regulator between 25 - 30 PSI.
4. To avoid sputtering, press Trigger all
the way down to start air flow, then pull
Trigger back to start paint flow.
a. Pull Trigger all the way back
for maximum paint flow.
b. Pull Trigger part-way back for less paint flow.
>1%F"( ^1%J,"8$
5. To avoid sputtering, when stopping, push
Trigger forward to stop paint flow, then
release Trigger to stop air flow.
6. When changing colors or clearing clogs,
clean Airbrush according to Clean
During Use on page 9.
7. When finished, clean Airbrush according to
Clean After Every Use on page 9.
8. Turn Power Switch OFF and unplug Air Compressor.
9. Bleed air pressure from Airbrush then
disconnect Airbrush from Air Hose.
10. Place cloth under Regulator/Filter. Push Drain Valve
slowly to gradually release tank pressure and any
built-up moisture. Do not remove Drain Valve.
11. Store the Air Compressor and Airbrush
indoors out of children’s reach.
Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 57637
EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM
O7*,8"83
QFKMLMRj%%GI%JK6!6MG%E6KLI[E%LMe[KH-%GI%JK6!6MG%;LK6=%%
L;%F%;PFNNFSP6%EIP!6MG%M66TE%GI%S6%[E6T=%%
FT]6K6%GI%G]6%;IPPIQLMR-
a. ;&77&)%#&7V*8$%5,8'2,4$'(*(\#%47*,8%'/%
"8#$('4$"&8#%,89%#,2*$U%/(*4,'$"&8#1
b. ;7'#.%F"(+('#.%,%2'77%.&#*%7*83$.%
2(&5%,"(%4&5/(*##&(1
c. L2%4&77*4$"83%27'#.*9%#&7V*8$#%"8%
5*$,7%4&8$,"8*(=%$(,8#2*(%$&%8&85*$,7%
4&8$,"8*(=%,89%27'#.%5*$,7%4&8$,"8*(1
d. Q&(W%2,(%,),U%2(&5%,8U%"38"$"&8%
#&'(4*#%"8%,%V,/&(%2(**%,(*,1
e. X**/%47,##%FSO%2"(*%*Y$"83'"#.*(%8*,(+U1
E&7V*8$%E*7*4$"&8
;&77&)%/,"8$%,89%#&7V*8$%5,8'2,4$'(*(\#%(*4&55*89,$"&8#%2&(%47*,8"83=%#&7V*8$%$U/*=%,89%9"#/&#,71
O7*,8%T'("83%[#*
1. Designate container or use Airbrush Cleaning
Bottle (sold separately) for waste.
2. Have paper towels and brushes
(sold separately) on hand.
3. Pour excess paint back into paint container.
4. Add solvent to Cup, wipe with brush to loosen paint.
5. Spray solvent into container, then spray on
paper towel to see solvent runs clear.
6. Repeat adding solvent and spraying
until solvent runs clear.
7. Wipe Lid.
8. Resume painting.
O7*,8%F2$*(%6V*(U%[#*%
1. Designate small container for cleaning parts.
2. Clean according to Clean During
Use on page 9.
3. Turn Power Switch OFF and unplug Air Compressor.
4. Disconnect Airbrush from Air Hose.
5. Disassemble Airbrush:
a. Remove Handle.
b. Loosen Needle Chucking Nut enough for
Needle removal, but do not remove.
c. Carefully remove Needle, avoiding
bending tip. Wipe Needle with paper
towel wetted with solvent.
d. Remove Needle Cap and Nozzle Cap.
Place parts in small container.
e. Carefully remove Nozzle with included
wrench. Place in small container.
f. Add solvent to small container to cover
parts. Soak no longer than 10 minutes.
g. Use brush to clean parts and
inside front of Airbrush.
h. Wipe exterior surfaces with paper
towel wetted with solvent.
6. Make sure all parts are dry and free from
residual paint, then reassemble Airbrush:
a. Replace Nozzle with included wrench.
b. Replace Nozzle Cap and Needle Cap.
c. Inspect Needle to make sure tip is
not bent, then carefully insert Needle
straight into Needle Chucking Nut with
gentle pressure until Needle stops.
d. Tighten Needle Chucking Nut, then pull
Trigger to confirm Needle moves. If Needle
does not move, loosen Needle Chucking Nut
until Needle moves. Replace Handle.
M**97*%
O.'4W"83%
M'$
M&ii7*
O,/
M**97*
O,/
M&ii7*
M**97*
Q,#$*%T"#/&#,7
After cleaning, dispose of waste according to paint and solvent manufacturer’s
directions and local hazardous waste standards.
Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 57637
EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM
N,"8$*8,84*%,89%E*(V"4"83
%J(&4*9'(*#%8&$%#/*4"2"4,77U%*Y/7,"8*9%"8%$."#%5,8',7%5'#$%
+*%/*(2&(5*9%&87U%+U%,%<',7"2"*9%$*4.8"4",81
GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%
G'(8%$.*%J&)*(%E)"$4.%fI;;g%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%&'$7*$%
+*2&(*%/*(2&(5"83%,8U%"8#/*4$"&8=%5,"8$*8,84*=%&(%47*,8"83%/(&4*9'(*#1
GI%JK6!6MG%E6KLI[E%LMe[KH%;KIN%FLK%OINJK6EEIK%;FLP[K6-%
T&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%V"+(,$"&8%&44'(#=%
.,V*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
O7*,8"83=%N,"8$*8,84*=%,89%P'+("4,$"&8
F"(%O&5/(*##&(
1. S6;IK6%6FO]%[E6= inspect the
general condition. Check for:
• loose hardware,
• misalignment or binding of moving parts,
• cracked or broken parts,
• damaged electrical wiring, and
• any other condition that may
affect its safe operation.
2. F;G6K%[E6= wipe external surfaces of the
Air Compressor with a clean cloth, then
store indoors out of children’s reach.
3. QFKMLMRj%%GI%JK6!6MG%E6KLI[E%
LMe[KH-%%L2%$.*%#'//7U%4&(9%&2%$."#%F"(%
O&5/(*##&(%"#%9,5,3*9=%"$%5'#$%+*%(*/7,4*9%
&87U%+U%,%<',7"2"*9%#*(V"4*%$*4.8"4",81
F"(+('#.
1. S6;IK6%6FO]%[E6= inspect the
general condition. Check for:
• bent needle,
• stuck needle,
• proper trigger movement, and
• any other condition that may
affect its safe operation.
2. F;G6K%[E6= clean according to Clean
After Every Use on page 9, then
store indoors out of children’s reach.
O&5/(*##&(%N,"8$*8,84*%E4.*9'7*
Following are general guidelines for maintenance checks of the Air Compressor.
M&$*- The environment in which the Air Compressor is used, and the frequency of use will affect how
often you will need to check the Air Compressor components and perform maintenance procedures.
T,"7U-
a. Make sure all nuts and bolts are tight.
b. Drain moisture from filter.
c. Check for abnormal noise or vibration.
d. Check for air leaks.*
e. Wipe off any oil or dirt from the Air Compressor.
* To check for air leaks, apply soapy water to joints while
the Air Compressor is pressurized. Look for air bubbles.
Altri manuali per 57637
1
Altri manuali Avanti compressore d'aria
