Avanzini DRAGO D1/M Scheda tecnica

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

Instruction manual,

use and maintenance

AVANZINI BRUCIATORI s.r.l.

Via G. Battistini, 11

43122 - Parma (PR) - Italy

tel. +39 0521 271344

fax +39 0521 775862

[email protected]

DRAGO D1/M BURNER

REV.01

CONTENTS

Instructions, use and maintenance manual

Page 2

FOREWORD

mechanical means, including photocopies, recording or any other storage and data retrieval system, for any

purpose other than the exclusive personal use of the purchaser, without the express written consent of the

Manufacturer.

The Manufacturer is by no means liable for the consequences of incorrect operations performed by the user.

EDITOR'S NOTE

This documentation is expressly addressed to technicians. Therefore, information that can be easily retrieved by

reading these texts and analysing the drawings may not be explained further.

The Editor is by no means liable for any information and data provided in this manual: all information included

herein has been supplied, controlled and approved by the Manufacturer/Agent during review.

The Editor shall by no means be held responsible for the consequences resulting from the user’s misuse of the

system.

GENERAL REMARKS

Any operational and maintenance instructions, as well as the recommendations described herein, shall be

complied with.

To achieve the best results the Manufacturer recommends performing regular cleaning and maintenance

operations so as to maintain the equipment in the best conditions.

The personnel responsible for the system must be adequately trained on its use and maintenance. They must

also comply with the operating procedures and safety standards indicated in this manual.

In any case, note that the writing company is always available for any clarications or additional information.

INDEX OF THE REVISIONS

REV. NOTES AT

PUBLICATION No. OF LAST PAGE DATE

00 First version 104 05/2018

01 Second version 104 06/2018

AVANZINI BRUCIATORI s.r.l.

CONTENTS

Instructions, use and maintenance manual

Page 3

TABLE OF CONTENTS

CONTENTS

Instructions, use and maintenance manual

Page 4

TABLE OF CONTENTS

1. IDENTIFICATION OF THE MACHINE .......................................................9

1.1. MANUFACTURER IDENTIFICATION .................................................................................. 9

1.2. MODEL IDENTIFICATION .................................................................................................... 9

1.3. IDENTIFICATION PLATE ................................................................................................... 10

1.4. DECLARATION OF CONFORMITY (COPY) ...................................................................... 11

1.5. REFERENCE DIRECTIVES ............................................................................................... 12

2. GENERAL PRELIMINARY INFORMATION ............................................ 13

2.1. MANUFACTURER IDENTIFICATION ................................................................................ 13

2.2. SUPPLY AND PRESERVATION ......................................................................................... 13

2.3. UPDATES ........................................................................................................................... 13

2.4. LANGUAGE ........................................................................................................................ 14

2.5. MANUAL PAGE STRUCTURE ........................................................................................... 15

2.6. OPERATOR QUALIFICATIONS ......................................................................................... 16

2.7. SYMBOLS USED IN THE MANUAL ................................................................................... 18

2.8. TERMINOLOGY USED ...................................................................................................... 19

2.9. SAFETY PICTOGRAMS ..................................................................................................... 20

2.10. PERSONAL PROTECTIVE EQUIPMENT .......................................................................... 21

2.11. WARRANTY ....................................................................................................................... 22

3. SAFETIES ................................................................................................23

3.1. SAFETY DEVICES ............................................................................................................. 23

3.1.1. ELECTRICAL CUT-OUT SWITCH ..................................................................................................................24

3.1.2. MAIN SWITCH ................................................................................................................................................24

3.1.3. MAXIMUM SAFETY TEMPERATURE ............................................................................................................24

3.2. NOISE LEVELS .................................................................................................................. 25

3.3. VIBRATIONS ...................................................................................................................... 25

3.4. ELECTROMAGNETIC COMPATIBILITY ............................................................................25

3.5. RESIDUAL RISKS .............................................................................................................. 26

CONTENTS

Instructions, use and maintenance manual

Page 5

4. DESCRIPTION OF THE MACHINE .........................................................29

4.1. INTENDED USE (CORRECT) ............................................................................................ 29

4.1.1. REASONABLY FORESEEABLE IMPROPER MISUSE .................................................................................30

4.2. OBLIGATIONS AND PROHIBITIONS ................................................................................ 31

4.2.1. USER OBLIGATIONS .....................................................................................................................................31

4.2.2. OPERATOR OBLIGATIONS ...........................................................................................................................31

4.2.3. PROHIBITIONS FOR THE OPERATORS ......................................................................................................32

4.3. TECHNICAL DATA .............................................................................................................. 33

4.4. MAIN COMPONENTS ........................................................................................................ 34

4.5. WORK CYCLE ................................................................................................................... 36

5. TRANSPORT AND INSTALLATION ....................................................... 37

5.1. INTRODUCTION ................................................................................................................ 37

5.2. PACKAGING ....................................................................................................................... 38

5.3. TRANSPORT AND HANDLING .......................................................................................... 39

5.3.1. INFORMATION ABOUT TRANSPORT AND HANDLING ...............................................................................39

5.3.2. TABLE OF UNITS AND OF WEIGHTS ...........................................................................................................40

5.4. ARRANGEMENTS TO BE MADE BY THE CUSTOMER ................................................... 40

5.5. INSTALLATION ENVIRONMENT ....................................................................................... 41

5.5.1. INSTALLATION SITE ........................................................................................................................................41

5.5.2. OVEN INSTALLED INDOORS .........................................................................................................................42

5.5.3. OVEN INSTALLED OUTDOORS, WITH OVEN LOADING DOOR IN A SEPARATE ROOM (INDOORS) ......42

5.5.4. OVEN INSTALLED OUTDOORS .....................................................................................................................43

5.6. OPERATIONS ON OVEN INSTALLATIONS ...................................................................... 44

5.6.1. HOLE IN THE COOKING TOP .......................................................................................................................44

5.6.2. POSITION FOR TEMPERATURE MEASUREMENT .....................................................................................45

5.6.3. HOLE FOR THE TEMPERATURE PROBE ....................................................................................................46

5.6.4. FLUE ...............................................................................................................................................................47

CONTENTS

Instructions, use and maintenance manual

Page 6

5.7. INSTALLING THE BURNER ............................................................................................... 48

5.7.1. FIXING THE FLANGE WITH SLEEVE ...........................................................................................................48

5.7.2. VERIFY POSITIONING OF THE ELECTRODE .............................................................................................49

5.7.3. SECURING THE BURNER.............................................................................................................................49

5.7.4. DRAGO BABY SIX CONTROL PANEL FASTENING AND CONNECTION ...................................................50

5.7.5. POSITIONING THE TEMPERATURE PROBE ..............................................................................................51

5.8. CONNECTIONS ................................................................................................................. 52

5.8.1. ELECTRICAL CONNECTION .........................................................................................................................52

5.8.2. GAS CONNECTION .......................................................................................................................................53

5.9. DISMANTLING AND WASTE DISPOSAL .......................................................................... 56

6. HOW TO USE ..........................................................................................59

6.1. DRAGO BABY SIX CONTROL PANEL .............................................................................. 60

6.2. FIRST IGNITION AND ADJUSTMENT ............................................................................... 62

6.2.1. CELSIUS / FAHRENHEIT DEGREES UNIT OF MEASUREMENT CHANGE ...............................................63

6.2.2. FIRST IGNITION WITH THE CONTROLS OF THE CONTROL PANEL OF THE DRAGO BABY SIX ...........64

6.2.3. COOKING TEMPERATURE SETTING ..........................................................................................................66

6.2.4. LOW FLAME GAS ADJUSTMENT .................................................................................................................67

6.2.5. AIR ADJUSTMENT ........................................................................................................................................69

6.2.6. GAS PARAMETERS .......................................................................................................................................70

6.2.7. SETTING THE LIMIT TEMPERATURE ..........................................................................................................71

6.2.8. BURNER OPERATION WITH THE DRAGO BABY SIX CONTROL PANEL ..................................................72

6.2.9. ON/OFF FUNCTION ......................................................................................................................................72

6.2.10. HIGH FLAME POWER ADJUSTMENT ..........................................................................................................73

6.2.11. SWITCHING THE BURNER OFF VIA DRAGO BABY SIX ............................................................................74

6.3. ERROR MESSAGES ......................................................................................................... 75

6.3.1. GREEN DISPLAY ERROR MESSAGES ........................................................................................................75

6.3.2. RED DISPLAY ERROR MESSAGES .............................................................................................................75

6.3.3. LED ERROR MESSAGES ..............................................................................................................................75

CONTENTS

Instructions, use and maintenance manual

Page 7

7. MAINTENANCE .......................................................................................77

7.1. INTRODUCTION ................................................................................................................ 77

7.2. SAFETY WARNINGS ......................................................................................................... 78

7.3. ROUTINE MAINTENANCE ................................................................................................ 79

7.3.1. ROUTINE MAINTENANCE TABLE ................................................................................................................79

7.3.2. MACHINE CLEANING ....................................................................................................................................80

7.4. SPECIAL MAINTENANCE ................................................................................................. 81

7.5. BURNER GAS CONVERSION ........................................................................................... 82

7.5.1. NOZZLE REPLACEMENT ..............................................................................................................................82

7.5.2. NOZZLE COMPOSITION .............................................................................................................................84

7.5.3. DRAGO BABY SIX CONTROL PANEL GAS CONVERSION .........................................................................85

7.5.4. FLAME ARRESTOR REPLACEMENT ...........................................................................................................86

7.5.5. FLAME ARRESTORS .....................................................................................................................................87

7.5.6. REPLACING THE BURNER SIT CONTROL UNIT ........................................................................................88

7.5.7. PROBE REPLACEMENT ...............................................................................................................................92

8. TROUBLESHOOTING .............................................................................93

8.1. INTRODUCTION ................................................................................................................ 93

8.2. ERROR MESSAGES ......................................................................................................... 99

8.3. MANUFACTURER’S ADVICE .......................................................................................... 100

9. ATTACHMENTS ....................................................................................101

9.1. BURNER CONTROL UNIT DIAGRAM ............................................................................. 102

9.2. CONNECTIONS DIAGRAM ............................................................................................. 103

9.3. TECHNICAL DATA SHEET ............................................................................................... 103

CONTENTS

Instructions, use and maintenance manual

Page 8

PAGE INTENTIONALLY LEFT BLANK

CHAPTER 1

Instructions, use and maintenance manual

Page 9

1. IDENTIFICATION OF THE MACHINE

1.1. MANUFACTURER IDENTIFICATION

Any request for information or assistance must be sent to:

MANUFACTURER:

AVANZINI BRUCIATORI s.r.l.

Via G. Battistini, 11

43122 Parma (PR) - ITALY

Tel. (+39) 0521-271344 Fax (+39) 0521-775862

email: [email protected]

Website address: www.avanzinibruciatori.it

1.2. MODEL IDENTIFICATION

MACHINE: ON

MODEL: DRAGO D1/M

SERIAL NUMBER:

CUSTOMER:

his manal contains condential information and drawings, property of II II s.r.l.

It is forbidden to even partially reprodce the manal withot the written athorisation of II II s.r.l.

CHAPTER 1

Instructions, use and maintenance manual

Page 10

1.3. IDENTIFICATION PLATE

or machine identication prposes, a special identication plate was afed to the machine the identication

data indicated on this plate mst be reported to AVANZINI BRUCIATORI s.r.l. every time a service call is

reested or when ordering spare parts

POS. ELEMENT

1 Model

2 Serial number

3ype of gas

4 Year of manufacture

5 Gas category

6ontries

7as pressre

8ower spply

9lectrical power

10 hermal power

11  maring

12 Manufacturer Data

21 3

4 10

CAUTION!

IT IS STRICTLY PROHIBITED to remove the identication plate and/or replace it with other

plates. Should the plate be damaged, detached or the manufacturer's seal be removed for

accidental reasons, the customer must inform the Manufacturer.

Indice

Altri manuali Avanzini Bruciatore

Avanzini

Avanzini Drago Manuale utente

Avanzini

Avanzini Drago PZERO Manuale di istruzioni

Avanzini

Avanzini DRAGO P1 Manuale utente

Avanzini

Avanzini DRAGO P1 Scheda tecnica

Avanzini

Avanzini DRAGO P1 PLUS Guida

Manuali Bruciatore popolari di altre marche

Riello

Riello RS 28/M Guida rapida

True Induction

True Induction TI4B Manuale utente

Weishaupt

Weishaupt WG20 Series Manuale utente

Carolina Cooker

Carolina Cooker M116672 Manuale utente

Riello

Riello RX 500 S/PV Manuale di istruzioni

Unigas

Unigas HTP2000 Manuale utente

baltur

baltur BT 250 DSG 4T Manuale utente

muenkel design

muenkel design round burner Manuale utente

Ecoflam

Ecoflam Multicalor 170.1 Manuale utente

baltur

baltur BT 14 DSGW Manuale utente

artisan

artisan Art-SB1 Guida

Riello

Riello P 140 T/G Guida rapida

AESYS

AESYS TurboFire II Manuale utente

Riello

Riello RG1RKD Guida rapida

IKEA

IKEA GRILLSKÄR Manuale utente

RUSTA

RUSTA SAREK Manuale utente

PROPOINT

PROPOINT 8933657 Manuale utente

baltur

baltur TBL 1000 ME Manuale di riferimento